幂函数对建筑物沉降的回归分析

通过实例推导幂函数对建筑物沉降进行回归分析，并且得出较为精确的结果，同时也说明在选择回归函数的时候，还会受到很多条件影响。     

图像控制点数据库的设计与实现

地面控制点数据是航天航空图像摄影测量几何处理的必需数据。文中首先比较了控制点数据的存储管理方式，即采用文件系统方式与数据库方式的优缺点；接着分析了控制点图像数据的特征，从而提出了图像控制点数据的数据库存储方案，讨论了图像控制点数据库的查询方法；最后结合文中的方法，设计并且实现了一个控制点图像数据库管理与应用实验系统。通过分析认为，建立控制点图像数据库是重复利用控制点资源的有效途径。     

A technique for modeling the Earth’s gravity field on the basis of satellite accelerations

A technique is proposed for Earths gravity field modeling on the basis of satellite accelerations that are derived from precise orbit data. The functional model rests on Newtons second law. The computational procedure is based on the pre-conditioned conjugate-gradient (PCCG) method. The data are treated as weighted average accelerations rather than as point-wise ones. As a result, a simple three-point numerical differentiation scheme can be used to derive them. Noise in the orbit-derived accelerations is strongly dependent on frequency. Therefore, the key element of the proposed technique is frequency-dependent data weighting. Fast convergence of the PCCG procedure is ensured by a block-diagonal pre-conditioner (approximation of the normal matrix), which is derived under the so-called Colombo assumptions. Both uninterrupted data sets and data with gaps can be handled. The developed technique is compared with other approaches: (1) the energy balance approach (based on the energy conservation law) and (2) the traditional approach (based on the integration of variational equations). Theoretical considerations, supported by a numerical study, show that the proposed technique is more accurate than the energy balance approach and leads to approximately the same results as the traditional one. The former finding is explained by the fact that the energy balance approach is only sensitive to the along-track force component. Information about the cross-track and the radial component of the gravitational potential gradient is lost because the corresponding force components do no work and do not contribute to the energy balance. Furthermore, it is shown that the proposed technique is much (possibly, orders of magnitude) faster than the traditional one because it does not require the computation of the normal matrix. Hints are given on how the proposed technique can be adapted to the explicit assembling of the normal matrix if the latter is needed for the computation of the model covariance matrix.Acknowledgments. Professor R. Klees is thanked for support of the project and for numerous fruitful discussions. The authors are also thankful to Dr. J. Kusche for useful remarks and to Dr. E. Schrama, his solid background in satellite geodesy proved to be very helpful. A large number of valuable comments were made by Dr. S.-C. Han, Dr. P. Schwintzer, and an anonymous reviewer; their contribution is greatly acknowledged. The satellite orbits used in the numerical study were kindly provided by Dr. P. Visser (Aerospace Department, Delft University of Technology). Access to the SGI Origin 3800 computer was provided by Stichting Nationale Computerfaciliteiten (NCF), grant SG-027.     

追踪法点位探测及其应用

窗口检索是许多信息系统的基本功能之一,包括单窗口检索和多窗口检索。多窗口检索就是判断点状日标位于哪个多边形内,即“点位探测”。在本文介绍了追踪法点位探测的基本思想和方法,并把这一思想引入矢量多边形叠置运算中,有效地提高了矢量叠置的求交效率。     

隧道三维点云孔洞修复方法

针对隧道三维激光扫描点云中的孔洞,设计一种基于断面轮廓的孔洞修复方法。隧道具有深长性与截面恒定性两大特征,文中基于这两大特征,利用间邻稳定轮廓拟合完整隧道修复孔洞。该方法能够对三维激光扫描点云进行圆柱投影,利用Delaunay三角构网,提出基于隧道表面三角网的孔洞识别方法,最后根据相邻隧道轮廓相似的特点,利用相邻的轮廓对孔洞进行修复。该方法能很好的修复孔洞并保留隧道结构细节,并以真实的隧道扫描数据验证算法的有效性和可靠性。     

一种加快BDS精密单点定位初始化的方法

由于BDS卫星的星座特性及卫星的轨道和钟差的精度影响,使得传统消电离层组合精密单点定位(PPP)的初始化时间较长。针对上述问题,文中对附加电离层约束的非组合精密单点定位算法进行研究。首先介绍非组合PPP算法,分析其与传统PPP的差异;其次分别利用CODE电离层格网产品,以反距离加权算法计算的站星电离层延迟、低阶球谐函数建立的区域电离层产品等作为先验信息对非组合PPP进行约束。通过MGEX观测网实测数据静态和仿动态计算表明,相比传统消电离层组合PPP,附加电离层约束的非组合PPP能够有效缩短初始化时间,同时能够获得高精度的定位结果。     

基于交叉点的道路曲线化简算法研究

现有的曲线化简算法不能很好地化简具有交叉路口的道路曲线,针对这一问题提出一种基于交叉点的道路曲线化简算法。算法分为预化简和修正化简两个阶段:首先识别并得到曲线上的分段点,利用相邻的分段点作为道格拉斯-普克算法的首尾点对曲线进行化简,得到预化简的结果;然后对于交叉点引入偏差阈值ε,通过判断道路曲线交叉点与化简后交叉点的距离与偏差精度ε的大小关系来确定该交叉点的化简与保留,如果保留或者化简后的道路曲线没有交叉点那么将原交叉点作为分段点对此段曲线进行重新化简。理论分析与实验结果表明,文中算法能够有针对性地保留或化简道路交叉点以及保持曲线化简后的形态特征。     

基于AgisoftPhotoscan的图像三维重建及精度研究

通过普通相机获取图像信息,计算三维空间物体的几何信息,重建和分析物体的基本原理;了解图像处理软件Agisoft Photoscan的工作流程,并设计实验;通过未检校的普通数码相机对某雕塑头像和亭子进行拍摄,使用Agisoft Photoscan软件对图像进行处理,得到三维点云数据,进行物体三维重建,验证三维重建的有效性;通过提取和实测预设对比点的三维坐标值,求取误差,验证在百幅以内的图像建模误差在1cm以内。此方法可应用到表面复杂的异形物体建模中。     

边角权匹配对城市大型导线网平差结果精度影响分析

通过某工业城市大型一级导线网观测成果的限差检验、观测数据处理，探讨导线网平差时、，边、角验权的合理选择和匹配，及其对平差结果的精度影响，从中得出一些认识和有益的经验。