The Validity of Similarity Theory in the Roughness Sublayer Above Forests

Flux-gradient relationships based upon similarity theory have been reported to severely underestimate scalar fluxes in the roughness sublayer above forests, as compared to independent flux estimates (for example, eddy covariance or energy balance measurements). This paper presents the results of a unique three-month investigation into the validity of similarity theory in the roughness sublayer above forests. Eddy covariance and flux-gradient measurements of carbon dioxide (CO²) exchange were compared above a mixed deciduous forest at Camp Borden, Ontario, both before and after leaf senescence. The eddy covariance measurements used a Li-Cor infrared gas analyzer, and the flux-gradient (similarity theory) measurements featured a tunable diode laser Trace Gas Analysis System (TGAS). The TGAS resolved the CO² concentration difference to 300 parts per trillion by volume (ppt) based upon a half-hour sampling period. The measured enhancement factor (the ratio of independent flux estimates, in this case eddy covariance, to similarity theory fluxes) was smaller and occurred closer to the canopy than in most previous investigations of similarity theory. Very good agreement between the eddy covariance and similarity theory fluxes was found between 1.9 and 2.2 canopy heights (h^c), and the mean enhancement factors measured before and after leaf senescence were 1.10 plusmn; 0.06 and 1.24 ± 0.07, respectively. Larger discrepancies were measured closer to the canopy (1.2 to 1.4 h^c), and mean enhancement factors of 1.60 ± 0.10 and 1.82 ± 0.11 were measured before and after leaf senescence, respectively. Overall, the Borden results suggest that similarity theory can be used within the roughness sublayer with a greater confidence than previously has been believed.     

线性天线阵列空间相关性函数的分析

推导了在线性天线阵列中的9 种典 型角能量分布的空间相关性方程&即高 斯分布%高斯空间分布和均匀分布''其中 高斯分布是由高斯空间分布推导得到 的''空间相关性方程是空间天线&阵列几 何以及角能量分布的一个函数''分别对 在高斯角能量分布和均匀角能量分布下 的空间相关性方程进行了分析&将天线 间的距离和角能量分布的标准差作为参 数在^S3TS. 环境下进行了仿真''结果表 明,在一定范围内增大天线间的距离以 及角能量分布标准差可以减小天线阵列 空间相关性&改善系统性能-同时&在中 长距离内&高斯角能量分布更有利于提 高系能的性能''     

Impact of Atmospheric Surface-layer Parameterizations in the new Land-surface Scheme of the NCEP Mesoscale Eta Model

We tested three atmospheric surface-layer parameterization schemes (Mellor-Yamadalevel 2, Paulson, and modified Louis), both ina 1-D mode in the new NCEP land-surface scheme against long-term FIFE and HAPEX observations, and in a coupled 3-D mode withthe NCEP mesoscale Eta model. The differences inthese three schemes and the resulting surface exchange coefficients do not, in general, lead to significant differences in model simulated surface fluxes, skin temperature, andprecipitation, provided the same treatment of roughness length for heat is employed.Rather, the model is more sensitive to the choice of the roughness length for heat. To assess the latter, we also tested two approaches to specifythe roughness length for heat: 1) assuming the roughness length for heat is a fixed ratio of the roughness length for momentum, and 2) relating this ratio to the roughness Reynolds number as proposed by Zilitinkevich.Our 1-D column model sensitivity tests suggested that the Zilitinkevich approach can improve the surface heat fluxand skin temperature simulations. A long-term test with the NCEP mesoscaleEta model indicated that this approach can also reduce forecast precipitation bias. Based on these simulations, in January 1996 we operationally implemented the Paulsonscheme with the new land-surface scheme of the NCEP Eta model, along with the Zilitinkevich formulation to specify the roughness length for heat.     

Inverse analysis of weak and strong motion downhole array data from the Mw7.0 Sanriku-Minami earthquake

A hybrid optimization scheme, comprising a genetic algorithm in series with a local least-squares fit operator, is used for the inversion of weak and strong motion downhole array data obtained by the Kik-Net Strong Motion Network during the M_w7.0 Sanriku-Minami Earthquake. Inversion of low-amplitude waveforms is first employed for the estimation of low-strain dynamic soil properties at five stations. Successively, the frequency-dependent equivalent linear algorithm is used to predict the mainshock site response at these stations, by subjecting the best-fit elastic profiles to the downhole-recorded strong motion. Finally, inversion of the mainshock empirical site response is employed to extract the equivalent linear dynamic soil properties at the same locations. The inversion algorithm is shown to provide robust estimates of the linear and equivalent linear impedance profiles, while the attenuation structures are strongly affected by scattering effects in the near-surficial heterogeneous layers. The forward and inversely estimated equivalent linear shear wave velocity structures are found to be in very good agreement, illustrating that inversion of strong motion site response data may be used for the approximate assessment of nonlinear effects experienced by soil formations during strong motion events.     

Numerical simulation of internal boundary-layer development and comparison with atmospheric data

A finite-volume numerical model is employed to investigate the adaptation of the atmospheric boundary layer to a change in the underlying surface roughness, such as that existing in the transition from land to the free surface of a water body. Numerical results are validated by comparison with neutral stratification atmospheric data and compared with the internal boundary-layer (IBL) heights computed using a number of existing empirical formulae. The numerical analysis allows an extension of the fetch range in which the existing formulae, calibrated only by comparison with short fetch data, may be applied. An argument is offered that the spatial variability of the water surface roughness should be also taken into account for the IBL development over the surface of a water body.     

Note on a Parametric Relation for Separating Flow over a Rough Hill

A parametrization method used to account for the effects of flow separation and wall roughness on the lower boundary condition for turbulent boundary layers is investigated against direct numerical simulation and laser Doppler anemometry data. The numerical simulation represents flow over a smooth, flat surface with a prescribed external adverse pressure gradient. The water-channel experiments cover flow over smooth and rough hills for two specified Reynolds numbers. Global optimization algorithms based on four different direct search methods are used to assess the parametrization function, C, in terms of local mean velocity profiles and the parametrization parameters u _* (friction velocity), ∂ _x p (local pressure gradient), z ₀ (effective roughness) and d (zero-plane displacement). The study investigates regions of attached and reversed flows, and forty-two velocity profiles are compared with the proposed expression for the function C, including two profiles that satisfy the solution of Stratford.     

Investigation of natural rock joint roughness

The paper provides a comprehensive review on rock joint roughness measurement and quantification procedures. Superiority of fractal based methods over JRC, statistical parameters and statistical functions in quantifying roughness is discussed in the paper. Two of the best fractal based methodologies available in the literature, the modified 2-D divider and variogram methods, are used to quantify natural rock joint roughness in 3-D and 2-D, respectively. The capability of these two methods in accurate quantification of natural rock joint roughness is shown in the paper by applying the procedures to four natural rock joints. A good comparison has been obtained from the values obtained through the two methods. Both these methodologies have two parameters to capture the stationary roughness. The fractal dimension captures the spatial auto correlation of roughness; the other parameter captures the amplitude of roughness. Anisotropic roughness has been studied by applying two other methodologies: (a) a triangular plate methodology and (b) a light source methodology to the same four natural rock joints. A reasonably good comparison has been obtained through the results of these two methodologies. All four roughness quantification methodologies can be applied to any size of sample covering from laboratory to field scales. The results of the triangular plate and light source methodologies provided possible sliding direction values (under the gravitational loading) close to that reported in the literature for the rough discontinuity planes used in the study.     

The differential impact of some soil loss factors on flow,runoff creep and rainwash

The Hortonian model of runoff flow which had been thought to be applicable in arid areas has previously been shown not to be valid, notably in Israel, where inverse relations have been observed between slope angle, and runoff discharge and slope erosion. The paper discusses laboratory experiments on simulated slope conditions in a rather arid environment. It is shown by rain simulation on granite grus that infiltration capacity is a function of rainfall intensity, slope angle and runoff discharge. The infiltration capacity f can equal the rainfall intensity beyond a critical distance x(m) so that discharge becomes constant. Debris covers affect runoff hydraulics, especially on poorly cohesive soils, and both slow downslope and upslope movements which correspond to the process of so-called runoff creep can occur. Coarse debris and grass covers, as roughness factors, induce hydraulic discontinuities and activate local turbulent flow and slope erosion. Instead of being merely protective elements these factors tend to catalyze the slope wash, in comparison with naked surfaces, if the Reynolds number of the flow exceeds a certain critical value.     

Northern Aegean Earthquake (Mw=6.9): Observations at three seismic downhole arrays in Istanbul

The Northern Aegean Earthquake (M_w=6.9\M_L=6.5) took place on May 24, 2014 between the islands of Gokceada, Turkey and Samothraki, Greece. The tremors were felt as far as in Istanbul, about 300 km on the East – Northeast (ENE) side of the epicenter. Kandilli Observatory and Earthquake Research Institute (KOERI) of Bogazici University, Turkey operate three downhole arrays in Istanbul, namely Atakoy (ATK), Fatih (FTH) and Zeytinburnu (ZYT) arrays. In this study, waveforms and site response observed at the KOERI operated seismic downhole arrays during the May 2014 Northern Aegean Earthquake (NAE2014) are analyzed in detail and presented. Evaluation of the acceleration records have shown low amplitude but long period and long duration motions at Istanbul. Furthermore, the analyses of the recordings suggest that V_s30 alone may not be a sufficient parameter for the characterization of site amplification.     

风浪状态对海面拖曳系数的影响

通过对四种参数化方法的比较,认为风海雷诺数RB较风速、波龄和波陡能更好地描述拖曳系数CDN。利用分组平均法对CDN与RB关系进行处理,得到最佳的CDN参数化方案。利用COARE3算法测试了四种依赖海况的粗糙长度,与实测结果进行了比较,结果表明CDN与RB的关系式更真实地反映了海-气界面动量交换过程。