Characteristics of Momentum and Heat Transfer over Semiarid Grasslands with Different Grazing Intensities in Inner Mongolia, China

The drag coefficient (C d) and heat transfer coefficient (C h) with the bulk transfer scheme are usually used to calculate the momentum and heat fluxes in meteorological models.The aerodynamic roughness length (z 0m) and thermal roughness length (z 0h) are two crucial parameters for bulk transfer equations.To improve the meteorological models,the seasonal and interannual variations of z 0m,z 0h,coefficient kB 1,C d,and C h were investigated based on eddy covariance data over different grazed semiarid grasslands of Inner Mongolia during the growing seasons (May to September) from 2005 to 2008.For an ungrazed Leymus chinensis grassland (ungrazed since 1979),z 0m and z 0h had significant seasonal and interannual variations.z 0m was affected by the amount and distribution of rainfall.kB 1 exhibited a relatively negative variation compared with z 0h,which indicates that the seasonal variation of z 0h cannot be described by kB 1.To parameterize z 0m and z 0h,the linear regressions between ln(z 0m),ln(z 0h),and the leaf area index (LAI) were performed with R 2 =0.71 and 0.83.The monthly average kB 1 was found to decrease linearly with LAI.The four-year averaged values of C d and C h were 4.5×10 3 and 3.9×10 3,respectively.The monthly average C d only varied by 8% while the variation of C h was 18%,which reflects the different impacts of dead vegetation on momentum and heat transfer at this natural grassland.Moreover,with the removal of vegetation cover,grazing intensities reduced z 0m,z 0h,C d,and C h.     

裂变径迹长度测量的标准化研究

总结了影响裂变径迹长度测量的主要因素——蚀刻程序和测量误差，提出了对应的解决方法：采取统一的蚀刻程序和蚀刻标准，确立长度参照标准。由于锆石铀含量具有差异，蚀刻标准是锆石长度测量标准化的主要研究内容。     

基于卸荷和抗震分析理论的大岗山坝肩边坡锚固优化研究

基于卸荷岩体的理论和方法,对大岗山水电站坝肩边坡进行研究。以大型通用有限元程序ADINA为计算平台,对比分析坝肩边坡卸荷后,不同地震加速度及不同锚固长度和锚固吨位在卸荷条件下关键点的位移和应力以及塑性区的变化规律,认为边坡开挖变形由两部分组成,一部分为卸荷回弹,另一部分是由于大吨位锚索施加后产生的朝向坡内的压缩变形。研究表明,由于锚索穿过V岩体底部界线,在可能的滑坡剪出口形成强大的阻滑键,增加锚索长度或吨位均可有效地减小坝肩塑性区,地震加速度为0.1g和0.15g时,在各加固吨位下均可能形成塑性区的贯通;在不同的地震加速度下,受不同锚固长度和锚固力影响,不同关键点处水平向位移呈现线性变化和非线性变化,非线性关系中的拐点应重点关注;若要减少岩体塑性区,相同比例下增大锚固长度效果更好。为了有效减少在高地震烈度时边坡塑性区的发育,建议采用增加120%的锚固长度。     

Geometric adjustment of pools to changes in slope and discharge: a flume experiment

To characterize the factors controlling pool shape, 30 different forced pools were created utilizing a 50% triangular constriction in a 0.5-m wide, 6-m long recirculating flume. Pools were scoured from an initial plane bed of sand with a d₅₀ of 0.25 mm. Pool depth and length were measured and used as dependent variables in least-squares, multiple-regression analyses. Discharge, channel-bed gradient and energy slope were the independent variables. Additional linear-regression analyses were conducted with either pool depth or length and stream power. Results indicate that both pool depth and length are primarily a function of discharge. Channel-bed and energy slopes are also significantly related to pool length but are not significantly related to pool depth. Stream power is significantly related to both pool depth and length, but R² values for pool depth versus discharge indicate stronger relations than those between pool depth and stream power. Observations on the type of geometric adjustment indicate that pools may minimize their rate of energy expenditure primarily through elongation. In contrast, pool depth appears to be more sensitive to the characteristics of the constrictions that create the forced pools. The results suggest that many field studies may suffer from cross-correlation problems. In particular, channel erodibility may exert a more dominant influence on pool geometry than hydraulic controls in many constriction-influenced channels.     

FREEZE/THAW EFFECTS ON RILL AND GULLY EROSION IN THE NORTHWESTERN WHEAT AND RANGE REGION

Hydrology of the Northwestern Wheat and Range Region （NWRR） of the Pacific Northwest USA is dominated by winter events. Fifty-five to sixty-five percent of the precipitation occurs from November through March, and formation of impermeable frost, intensified by excessive tillage and tillage pans, has long been a major factor in rill and gully formation in the region. Saturated zones can form above tillage pans, freeze solid, and significantly reduce infiltration. Frost heaved surface soils thaw and weaken with warming temperatures or rain. Under these conditions, runoff from rain or snowmelt or a combination of the two is inevitable, concentrating in rills and channels, and carrying with it the loosened soil. Slopes are frequently quite steep and there may be little deposition above the toe slope. Classical over-fall head-cut gullies are uncommon. Concentrated flow channels form because of collection of water from impervious areas such as conventionally tilled fall seeded small grains and bare grass seed fields. In some soils, gullies are created by seepage from saturated layers above permanent restrictive layers in the soil. Gullies can also result from terrace failures due to rodent burrows and low compaction at the time of construction. In naturally unconsolidated soil, rodent activity can lead to piping failures that remove large quantities of subsurface soil and can become gullies. Rill measurements on conventionally tilled fields in Oregon, Washington, and Idaho were used to determine coefficients for relationships between slope length and steepness and size of rills. This paper describes these studies and the results as well as analysis of long-term erosion and weather records from southeastern Washington.     

地图符号游程编码表达及其应用

地图符号化将抽象的空间数据转换为可见的地图,其结果以栅格结构存储,进行地图输出时受限于栅格数据量.压缩符号化后的栅格数据来降低计算机资源开销是提高地图输出效率的一种有效途径,据此本文提出利用游程编码表达地图符号的方法,建立面向符号的游程编码数据结构,利用直接的游程运算取代栅格运算来完成地图的各种操作,并在此基础上完成地图输出.该方法减少了数据冗余,直接的游程运算提高了运算粒度,可以满足高分辨率地图输出对处理效率和内存开销的要求.     

吸、喷水法减小丁坝下游回流尺度的试验研究

由于流动边界出现凸出障碍物引起边界层分离,导致回流发展、水流流态恶化等一系列问题,在水利、航道及电站等工程中是一种普遍存在的现象。从控制边界层的思路出发,采用"吸、喷"水方案,即在凸出障碍物与水流平行的边界略上部位将一部分边界层水流吸走,并在其下游喷出增加边界层的动量,可以减小障碍物下游的回流尺度。在50cm宽水槽中进行的试验表明,采用这种方法是非常有效的。     

不同云重叠参数对全球和东亚地区模拟总云量的影响

在国家气候中心全球大气环流模式BCC_AGCM2.0中引入一组基于CloudSat/CALIPSO卫星观测的、能够体现真实时空变化特征的云垂直重叠参数（抗相关厚度,L_cf）数据,以减小由云的重叠描述造成的辐射场的不确定性。对比了采用时空变化的云重叠参数和采用恒定云重叠参数的气候模拟结果,发现无论在全球还是东亚区域,采用基于卫星观测的云重叠参数对模拟的总云量都有一定程度的改进。采用时空变化的云重叠参数后,冬、夏两季全球平均总云量与云和地球的辐射能量系统（CERES）卫星资料的误差都减少了1.6%,其中热带对流区域总云量的正偏差和副热带地区总云量的负偏差都明显减少,这些有助于正确模拟不同区域间的能量收支差异。在东亚区域,采用时空变化的云重叠参数后,冬、夏两季的东亚区域平均总云量与CERES卫星资料的误差分别减少了1.8%和1.4%。综上所述,基于CloudSat/CALIPSO卫星资料计算得到的L_cf有助于改进大气环流模式对总云量的模拟,从而提高模式对辐射场的模拟精度。      

减小测区的长度变形

论述了测量工作中的长度变形种类以及减小长度变形的方法，然后通过一实例说明如何减小长度变形，得出几点结论，有较好的参考价值。