Assimilation and Fractional Crystallization Controlled by Transport Process of Crustal Melt: Implications from an Alkali Basalt-Dacite Suite from Rishiri Volcano, Japan

Mechanisms of fractional crystallization with simultaneous crustalassimilation (AFC) are examined for the Kutsugata and Tanetomilavas, an alkali basalt–dacite suite erupted sequentiallyfrom Rishiri Volcano, northern Japan. The major element variationswithin the suite can be explained by boundary layer fractionation;that is, mixing of a magma in the main part of the magma bodywith a fractionated interstitial melt transported from the mushyboundary layer at the floor. Systematic variations in SiO₂ correlatewith variations in the Pb, Sr and Nd isotopic compositions ofthe lavas. The geochemical variations of the lavas are explainedby a constant and relatively low ratio of assimilated mass tocrystallized mass (‘r value’). In the magma chamberin which the Kutsugata and Tanetomi magmas evolved, a strongthermal gradient was present and it is suggested that the marginalpart of the reservoir was completely solidified. The assimilantwas transported by crack flow from the partially fused floorcrust to the partially crystallized floor mush zone throughfractures in the solidified margin, formed mainly by thermalstresses resulting from cooling of the solidified margin andheating of the crust. The crustal melt was then mixed with thefractionated interstitial melt in the mushy zone, and the mixedmelt was further transported by compositional convection tothe main magma, causing its geochemical evolution to be characteristicof AFC. The volume flux of the assimilant from the crust tothe magma chamber is suggested to have decreased progressivelywith time (proportional to t^–1/2), and was about 3 x 10^–2m/year at t = 10 years and 1 x 10^–2 m/year at t = 100years. It has been commonly considered that the heat balancebetween magmas and the surrounding crust controls the couplingof assimilation and fractional crystallization processes (i.e.absolute value of r). However, it is inferred from this studythat the ratio of assimilated mass to crystallized mass canbe controlled by the transport process of the assimilant fromthe crust to magma chambers. KEY WORDS: assimilation and fractional crystallization; mass balance model; magma chamber; melt transport; Pb isotope     

空间运动对象与时空数据类型研究

当前时空数据模型多以描述空间实体的离散变化为主。该文中对空间运动对象在抽象层次的无限连续空间、离散层次的有限离散空间上的数据类型进行分析和定义，将其分别划分为时间类型、空间类型和时态类型来研究，并提出支持空间运动对象的表示方法和操作方式。该方法既能表示空间实体的连续运动，也能表示其离散变化，为空间运动对象时空数据模型的建立奠定了基础。     

不同对流参数化方案和初值场组合对四川两次暴雨影响的数值模拟

针对2004年9月2~6日四川盆地东北部一次持续性暴雨过程和2004年6月30日成都地区暴雨过程,利用MM5中尺度数值模式,进行了Grell、Kuo、KF及BM四种积云对流参数化方案与T213模式分析值及NCEP再分析值两种初始值组合的数值试验,分析了不同积云方案和初值组合的模拟性能。比较结果表明,MM5模式较好地再现了这两次强降水过程。在同一模式中,不同对流参数化方案和不同初值组合在降水落区和强度模拟上存在一定程度的差异。初步模拟表明NCEP资料模拟的降水强度较T213资料模拟的降水强度偏弱,但降水落区较T213资料模拟的更接近实况,T213资料模拟的降水空报现象较严重。以T213资料模拟得到的高度、温度场都较NCEP资料更有利于影响系统的加强,模拟的湿度场、散度场和垂直运动场都较NCEP资料更有利于强降水的发生。相对而言,NCEP资料模拟结果更接近实况,Kuo和Grell方案对初值表现出更为敏感。     

能见度集合预报及后处理技术应用

基于污染物情况、环流系统和时空分布特征分析,利用神经网络对历史数据进行建模,生成了能见度集合预报产品。在2022年冬季的TS评分检验中,预报产品优于欧洲中期数值预报中心模式(ECMWF)的能见度预报产品。利用概率匹配、最优百分位和神经网络三种后处理方法生成后处理产品,这些产品的TS评分优于集合预报产品。预报输入的ECMWF模式2 m湿度与实况的偏差是误差的主要来源。利用集成方法对三种后处理产品进行集成,其TS评分结果在低能见度区间总体接近或略优于原始产品。生成的能见度集合预报后处理最优集成预报产品成功提高了对中期延伸期能见度天气的预测准确性。     

GRAPES千米尺度模式在西南复杂地形区降水预报偏差与成因初探

利用2019年夏季（6—8月）西南复杂地形区地面观测站逐时和逐日降水量观测数据,从降水量和降水频率入手,对同期GRAPES-Meso 3 km业务模式短期（36 h以内）降水预报性能,特别是在不同典型地貌区—四川盆地子区、云贵高原北部子区和南部子区、青藏高原东缘山地子区的预报偏差进行细致评估与分析。结果表明:（1）GRAPES-Meso 3 km模式能合理地刻画出西南复杂地形区夏季日降水和日内尺度降水的主要特征,以及小时降水频次-强度的基本关系。（2）在各子区,模式日降水量（频率）预报表现为清晰的正偏差,正偏差在盆地子区最显著,为观测值的1.1倍（0.3倍）;日降水量正偏差主要由强降水日降水量预报偏大引起,但频率正偏差在云贵高原南、北子区与其他两个子区不同,主要是中小雨日数预报偏多的贡献;强降水（中小雨）落区预报存在明显（轻微）偏大倾向,强降水预报落区偏大频率在青藏高原东缘山地子区最高,达82.8%,在云贵高原南部子区最低,为53.6%。（3）日循环上,各时次小时降水量（频率）预报整体偏大,且主要正偏差出现在观测的夜雨峰值时段,其中海拔1200 m以下区域的降水频率正偏差从夜间峰值区延续到中午,模式偏强的日降水量预报往往表现为日内偏长的降水时长或小时降水空报。（4）诊断分析显示,模式在四川盆地区突出的夏季日降水预报正偏差是模式对流层低层在云贵高原南-东南侧偏强的西南风预报与西南地区特殊地形结合的产物。      

石英脉型钨多金属矿床的扇状成矿实例及找矿模型

石英脉型钨矿床是中国数量最多的钨矿床类型,但保有储量消耗迅速,迫切需要创新找矿模型,指导找矿突破。文章结合二十余年的找矿实践,通过详细分析扇状成矿矿床实例,构建了石英脉型钨矿床新的找矿模型。该模型强调赋矿裂隙为岩浆动力成因,在花岗岩体顶部呈扇状分布型式,岩浆期后热液恰在裂隙张开时充填其中而形成扇状成矿系统;提出“就岩找矿”、“就矿找矿”、“就矿找岩”的地质、地球化学和地球物理标志,指导矿床尺度的勘查工程部署。截至目前,该模型已在广东禾尚田钨锡矿床、广西珊瑚钨锡矿床、广西社垌钨钼矿床、江西盘古山钨铋矿床等获得了验证,找矿成效显著。     

江西赣县大埠钨多金属矿田成岩成矿时空结构与找矿预测

大埠矿田位于南岭成矿带东段,是于都-赣县钨多金属矿集区重要组成,区内已发现钨多金属矿床（点）五十余处,矿床类型包括石英脉型、矽卡岩型、云英岩型和细脉浸染型等,各类矿化主要围绕大埠复式花岗岩体产出。然而,大埠矿田岩浆作用具有明显的多期次、多阶段的特点,各期次成岩成矿时代尚缺乏系统研究,各类岩浆岩与矿化关系争议较大。文章在岩体地质和矿床地质调查基础上,通过LA-(MC)-ICP-MS锆石U-Pb定年、锆石微量元素和Hf同位素分析,精确厘定了大埠花岗岩的成岩时代,探讨了多期次岩浆活动对区内成矿作用的贡献。锆石U-Pb定年结果分别为(429.1±4.7)Ma、(430.0±5.8) Ma、(431.8±4.7) Ma和(158.3±4.1) Ma,结合岩体地质填图信息,笔者认为大埠复式花岗岩基由加里东期和燕山期两部分组成。两期花岗岩均属于高钾钙碱性、过铝质S型花岗岩系列,两者均出现Eu负异常,燕山早期Eu负异常更明显。两期岩体锆石的ε_Hf(t)值分别为-6.3~-1.3与-11.4~-7.1,对应二阶段模式年龄为1.49~1.82 Ga与1.66~1.93 Ga,指示其母岩浆为中元古代的地壳部分熔融形成。锆石微量元素特征显示,两期花岗岩均为陆壳源区、具有相近的结晶温度,燕山早期花岗岩相对于加里东期有更高的结晶分异程度,有更高的氟含量,与钨成矿具有更强的相关性。大埠矿田钨多金属成矿时代集中在159~155 Ma,紧随燕山早期花岗质岩浆侵位而形成。基于大埠矿田成岩成矿时代格架研究,结合花岗岩成矿专属性和成矿地质条件分析,构建了区内钨多金属矿勘查模型,指明了大埠矿田细脉浸染型、云英岩型、内带石英脉型钨矿的找矿方向,预测大埠岩体东北部的燕山早期隐伏岩体具有寻找“合龙式”石英大脉型和细脉-云英岩型钨矿的潜力。     

改进的能量守恒方法及其在CHAMP重力场恢复中的应用

An efficient method for gravity field determination from CHAMP orbits and accelerometer data is referred to as the energy balance approach. A new CHAMP gravity field recovery strategy based on the improved energy balance approach IS developed in this paper. The method simultaneously solves the spherical harmonic coefficients, daily Integration constant, scale and bias parameters. Two 60 degree and order gravitational potential models, XISM-CHAMPO1S from the classical energy balance approach, and XISM-CHAMPO2S from the improved energy balance, are determined using about one year＇s worth of CHAMP kinematic orbits from TUM and accelerometer data from GFZ. Comparisons among XISM-CHAMPO1S, XISM-CHAMPO2S, EIGEN-CGO3C, EIGEN-CHAMPO3S, EIGEN2, ENIGNIS and EGM96 are made. The results show that the XISM-CHAMPO2S model is more accurate than EGM96, EIGENIS, EIGEN2 and XISM-CHAMPO1S at the same degree and order, and has almost the same accuracy as EIGEN-CHAMPO3S.     

基于交互多模型的水下目标跟踪方法

According to the requirements of real-time performance and reliability in underwater maneuvering target tracking as well as clarifying motion features of the underwater target, an interacting multiple model algorithm based on fuzzy logic inference （FIMM） is proposed. Maneuvering patterns of the target are represented by model sets, including the constant velocity model （CA）, the Singer mode~, and the nearly constant speed horizontal-turn model （HT） in FIMM technology. The simulation results show that compared to conventional IMM, the reliability and real-time performance of underwater target tracking can be improved by FIMM algorithm.     

基础隔震层钢螺旋弹簧软碰撞限位实验研究

设计制作了基础隔震软碰撞限位实验模型与3种类型的钢螺旋弹簧限位器,给出了实测的限位器力学特性参数。进行9种工况的振动台模型实验,分析实验数据得出了软碰撞限位器参数对结构反应的影响规律,优选出了适用于本隔震实验模型的软碰撞限位工况。