云南安宁磷矿区水系沉积物磷赋存形态及分布特征

磷污染是水污染的重要组成部分,因其可造成水体富营养化、水质下降,从而引起人们的广泛关注。研究沉积物中不同磷赋存形态及其分布特征有助于了解沉积物中磷的行为特征及迁移能力,从而为水体富营养化防治提供支撑。磷矿的开采、冶炼对矿区内水资源环境可能产生严重影响,本文以安宁磷矿区内河流、水库为研究区域,分析了不同水系沉积物磷元素赋存形态及分布特征,并对其生态风险进行评估。采用X射线荧光光谱法测定研究区水系沉积物总磷（TP）含量,并基于顺序提取及Hupfer改进的磷形态分析方法,将研究区各水系沉积物中磷分为弱吸附态磷（NH4Cl-P）、可还原态磷（BD-P）、金属氧化物结合态磷（NaOH-P）、钙结合态磷（Ca-P）、残渣态磷（Res-P）等5种形态,采用单因子污染指数法对其进行生态风险评估。结果表明：研究区水系沉积物样品中TP含量范围为567.6~48115.5mg/kg,NH4Cl-P含量范围为0.07~115.2mg/kg,BD-P含量范围为8.84~802.5mg/kg,NaOH-P含量范围为21.3~3129.5mg/kg, Ca-P含量范围为12~45098mg/kg,Res-P含量范围为28.5~515.4mg/kg。研究区各水系沉积物样品磷形态具有相似的分布特征,即磷主要以Ca-P和NaOH-P形态存在,其他磷形态的相对含量大小顺序为NH4Cl-P     

基于ERDAS二次开发的震害图像信息提取方法研究

通过ERDAS IMAGINE软件二次开发,建立了一些实用的震害信息提取方法,利用这些方法开发的震害遥感信息提取的程序模块对1976年唐山地震影像、1999年台湾集集地震影像及Quickbid影像进行了处理,将得到的结果与目视解译结果进行对比,结果表明研究中提出的震害信息提取方法具有较好的实用性.     

Bound and mobile soil water isotope ratios are affected by soil texture and mineralogy,whereas extraction method influences their measurement

Questions persist about interpreting isotope ratios of bound and mobile soil water pools, particularly relative to clay content and extraction conditions. Interactions between pools and resulting extracted water isotope composition are presumably related to soil texture, yet few studies have manipulated the bound pool to understand its influence on soil water processes. Using a series of drying and spiking experiments, we effectively labelled bound and mobile water pools in soils with varying clay content. Soils were first vacuum dried to remove residual water, which was then replaced with heavy isotope-enriched water prior to oven drying and spiking with heavy isotope-depleted water. Water was extracted via centrifugation or cryogenic vacuum distillation (at four temperatures) and analysed for oxygen and hydrogen isotope ratios via isotope ratio mass spectrometry. Water from centrifuged samples fell along a mixing line between the two added waters but was more enriched in heavy isotopes than the depleted label, demonstrating that despite oven drying, a residual pool remains and mixes with the mobile water. Soils with higher clay + silt content appeared to have a larger bound pool. Water from vacuum distillation samples have a significant temperature effect, with high temperature extractions yielding progressively more heavy isotope-enriched values, suggesting that Rayleigh fractionation occurred at low temperatures in the vacuum line. By distinctly labelling bound and mobile soil water pools, we detected interactions between the two that were dependent on soil texture. Although neither extraction method appeared to completely extract the combined bound and mobile (total water) pool, centrifugation and high temperature cryogenic vacuum distillations were comparable for both δ²H and δ¹⁸O of soil water isotope ratios.     

Air--sea gaseous exchange of PCB at the Venice lagoon (Italy)

Water bodies are important storage media for persistent organic pollutants (POPs) such as polychlorinated biphenyls (PCBs) and this function is increased in coastal regions because their inputs are higher than those to the open sea. The air-water interface is extensively involved with the global cycling of PCBs because it is the place where they accumulate due to depositional processes and where they may be emitted by gaseous exchange. In this work the parallel collection of air, microlayer and sub-superficial water samples was performed in July 2005 at a site in the Venice lagoon to evaluate the summer gaseous flux of PCBs. The total concentration of PCBs (sum of 118 congeners) in air varies from 87 to 273 pg m(-3), whereas in the operationally defined dissolved phase of microlayer and sub-superficial water samples it varies from 159 to 391 pg L(-1). No significant enrichment of dissolved PCB into the microlayer has been observed, although a preferential accumulation of most hydrophobic congeners occurs. Due to this behaviour, we believe that the modified two-layer model was the most suitable approach for the evaluation of the flux at the air-sea interface, because it takes into account the influence of the microlayer. From its application it appears that PCB volatilize from the lagoon waters with a net flux varying from 58 to 195 ng m(-2)d(-1) (uncertainty: +/-50-64%) due to the strong influence of wind speed. This flux is greater than those reported in the literature for the atmospheric deposition and rivers input and reveals that PCB are actively emitted from the Venice lagoon in summer months.     

不变矩特征在医学CT图像中的应用分析

本文以医学CT图像为研究对象,探讨不变矩特征在医学CT图像中的应用。首先实验验证不变矩特征所具有的旋转、平移、缩放等不变特性,其后以基于内容的医学图像检索为例,揭示不变矩特征在基于内容的医学图像检索中的应用原理,最后分析图像不变矩特征的应用场合。实验成果对不变矩特征在医学图像识别、图像匹配、形状分析、图像分割以及基于内容的图像检索等领域的应用具有推动作用。     

Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.     

一种有效的结构动态参数识别方法

本文以优化算法中单纯形法为基础,提出了一种只有利用实测的结构模态部分信息识别其结构参数的方法。数值计算表明,该算法具有良好的精度和适用性。     

Multi-level parameter structure identification for two-phase porous-media flow problems using flexible representations

We consider identification of absolute permeability (hydraulic conductivity) based on time series of pressure data in sparsely distributed wells for two-phase porous-media flow. For this problem, it is impossible to recover all details of the parameter function. On the other hand, a coarser, approximate recovery may be sufficient for many applications. We propose a novel solution approach, based on reparametrization, for such approximate identification of the parameter function. We use a nonlinear, composite representation, which is detached from the computational grid, allowing for a flexible representation of the parameter function at many resolution levels. This is utilized in a sequential multi-level estimation of the parameter function, starting at a coarse resolution, which is then gradually refined. The composite representation is designed to allow for smooth as well as sharp transitions between regions of nearly constant parameter value. Moreover, it facilitates the estimation also of the structure and smoothness of the parameter function itself. As a limiting case, the chosen representation is reduced to a zonation with implicit representation of the interior boundaries that is equivalent to a level-set representation. A motivation for the selected representation and the multi-level estimation is presented in terms of an analysis of sensitivity and nonlinearity. Numerical examples demonstrate identification of coarse-scale features of reference permeability distributions with varying degree of smoothness. Comparisons show how the multi-level strategy stabilize the identification and avoid local minima of the objective function compared to a single-level strategy.     

Preliminary study on weathering and pedogenesis of carbonate rock

South China is the largest continuous distribution area of carbonate rock in the world. The origin of the soils over the bedrock carbonate rock has long been a controversial topic. Here further exploration is made by taking five soil profiles as examples, which are developed over the bedrock dolomitite and limestone and morphologically located in upland in karst terrain in the central, west and north Guizhou as well as west Hunan, and proved to be the weathering profiles of carbonate rock by the research results of acid-dissolved extraction experiment of bedrock, mineralogy and trace element geochemistry. Field, mineralogical and trace element geochemical characteristics of weathering and pedogenesis for carbonate rock are discussed in detail. It is pointed out that weathering and pedogenesis of carbonate rock are important pedogenetic mechanisms for soil resources in karst area, providing a basis for further researches on the origin of soils widely overlying bedrock carbonate rocks in South China. Project supported by the National Natural Science Foundation of China (Grant No. 498330003) and National Key Basic Research Project (Grant No. 95pre-39).     

Neuzeitlicher Schadstofftrend: Polycylische aromatische Kohlenwasserstoffe (PAK) in aquatischen und terrestrischen Sedimenten

A Recent Contamination Trend: Polycylic Aromatic Hydrocarbons (PAHs) in Aquatic and Terrestrial Sediments Concentrations of polycylic aromatic hydrocarbons (PAHs) measured in aquatic sediments of small, medium‐sized or very large inland lakes, of estuaries as well as in terrestrial sediments from Germany, the UK, Finland, and the USA were plotted in 10 trend curves over the period from 1800 to 1990. The segments of the bore cores were dated for their deposition age. For comparability of the results, the trend is preferentially shown by the guide parameter fluoranthene. Until the 19th century, a constant background value of C_Fluo = 10…50 μg/kg was observed in all regions. Then a steep increase in concentration followed, reaching in the aquatic sediments a maximum in the period 1940 to 1965, while the individual fluoranthene values ranged widely from 90 to 2400 μg/kg. In several regions, a more or less distinct decrease superseded this maximum, although this development did not appear in terrestrial sediments, in one estuary, and in remote forest lakes in Finland. The trend curves reflect the atmospheric deposition of PAHs in airborne dust and in some cases the import through runoff via rivers. Thus, the sediment profiles depict the development of air pollution by pyrogenic contaminants over more than a century. Sediment profiles from rivers can be used only with a high degree of reservation, because of the irregularity and low representativity of the sedimentation.