Postbuckling of shear deformable stiffened anisotropic laminated cylindrical shell under axial compression

A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive.     

群的融合自由积的fnFrattini子群和fcFrattini子群

针对Azarian推广的任意多个子群的带循环融合自由积的Frattini子群的定理,提出了相应的关于fn-Frattini子群和fcFrattini子群的定理,并且从两个不同角度证明了结果。其中fnFrattini子群和fcFrattini子群分别定义为群的所有具有有限指数的极大正规子群的交和所有具有有限指数的极大特征子群的交,分别等于群的fn-非生成元和fc-非生成元组成的集合。进一步推广了Azarian和郭钦等相关定理。     

常见小波的尺度进制求解算法与程序

基于小波变换的稳定性函数来研究尺度进制的算法。用母波的频谱函数来构造出尺度进制为任意进制时的稳定性函数,根据稳定性函数计算小波框架的边界、紧致度和收敛因子,最后由框架参数值进一步计算得到尺度进制范围。结果表明,此范围有效地缓解了小波变换的稳定性和冗余性之间的矛盾。     

基于灰色自记忆模型的城市月需水量预测

建立了以灰色微分方程为动力核的自记忆模型,并首次应用于城市月需水量预测.先将具有季节性特征的实测历史数据通过季节指数法获得相对平滑的序列,再用所建灰色自记忆模型进行模拟、预测.研究表明,灰色自记忆模型建模方法简单且模拟和预测精度较为满意,平均相对误差为5.74％,灰色GM(1,1)模型预测平均相对误差是8.77％,其精...     

基于“点—轴系统”理论的鲁南旅游长廊建构

＂点—轴系统＂理论是区域开发的基础性理论,对于区域旅游开发同样具有重要的理论价值和现实指导意义。基于＂点—轴系统＂理论,在对旅游规划概念上的鲁南经济带进行修正的基础上,结合鲁南经济带旅游资源状况和旅游发展现状,提出重点打造以曲阜、日照、枣庄、临沂、菏泽、东平为核心的6个一级旅游增长点;以日东高速、105国道、206国道为发展轴线的3个一级旅游发展轴;形成圣人文化旅游板块、日照滨海旅游板块、湖滨红色休闲养生旅游板块、蒙山沂水红色逍遥游旅游板块、水浒休闲生态旅游板块六大各具特色的旅游板块。从而＂点-线-面＂共同组成＂双十字＂开发模式的鲁南旅游长廊,以此来最大限度地发挥鲁南地区旅游资源的潜力,实现鲁南旅游的腾飞。     

An SVM-based machine learning method for the separation of alteration zones in Sungun porphyry copper deposit

Sungun porphyry copper deposit is in East Azarbaijan province, NW of Iran. There exist four hypogene alteration types in Sungun: potassic, propylitic, potassic–phyllic, and phyllic. Copper mineralization is essentially associated more with the potassic and less with the phyllic alterations and their separation is, therefore, quite important. This research has tried to separate these two alteration zones in Sungun porphyry copper deposit using the Support Vector Machine (SVM) method based on the fluid inclusion data, and seven variables including homogenization temperatures, salinity, pressure, depth, density and the Cu grade have been measured and calculated for each separate sample. To apply this method, use is made of the radial basis function (RBF) as the kernel function. The best values for λ and C (the most important SVM parameters) that perform well in the training and test data are 0.0001 and 1, respectively. If these values for λ and C are applied, the phyllic and potassic alteration zones in the training and test data will be separated with an accuracy of about 95% and 100%, respectively. This method can help geochemists in separating the alteration zones because classifying and separating samples microscopically is not only very hard, but also quite time and money consuming.     

Amenity migration to the global south: Implications for community development

Despite a growing trend of migration to countries in the global South fueled by their natural amenities (i.e., natural amenity migration), research on this topic has predominantly been conducted in the global North. This is problematic given the notable socioeconomic, attitudinal, and behavioral differences between amenity migrants (often urbanites from developed countries) and local people (often rural residents of developing countries). Grounded in community field theory, this study begins to fill this gap in the literature by increasing our understanding of the ways in which local residents and amenity migrants interact in the amenity-rich community of Nuevo Arenal, Costa Rica. We found that linguistic, cultural, and spatial barriers (real and perceived) created a social climate in which the interaction between local residents and amenity migrants was primarily based on mundane interactions and did not lead to social integration. This proved to be a hindrance to the creation of the community field, which led to a lack of joint planning and participation in activities and projects that sought to improve the overall living conditions in the community. Explanations of these findings and the implications of such a divide are offered.     

Predicted ultimate capacity of laterally loaded piles in clay using support vector machine

The determination of ultimate capacity of laterally loaded pile in clay is a key parameter for designing the laterally loaded pile. The available methods for determination of ultimate resistance of pile in clay are not reliable. This study investigates the potential of a support vector machine (SVM)-based approach to predict the ultimate capacity of laterally loaded pile in clay. The SVM, which is firmly based on statistical learning theory, uses a regression technique by introducing an ?-insensitive loss function. A sensitivity analysis has been carried out to determine the relative importance of the factors affecting ultimate capacity. The results show that SVM has the potential to be a practical tool for prediction of the ultimate capacity of pile in clay.     

HHT法的基本原理及其应用探讨

以Timoshenko单跨梁为研究对象,采用回转射线矩阵法进行动力响应计算,针对Timoshenko梁的瞬态响应信号为非平稳信号,采用基于Hilbert—Huang变换原理的信号时频分析,并与FFT的处理结果进行对比分析。结果表明,HHT方法比Frr法更适合非平稳信号的分析和处理,同时,HHT方法不仅可以将瞬态信号中低频和高频部分分离出来,还可以通过Hilbert谱展示信号能量在时频域内的分布,更为深入的了解信号的本质。