耗散源函数及LAGFD-WAM海浪数值模式的改进

本文是在LAGFD-WAM海浪模式方法基础上,根据破碎波统计理论给出了LAGFD耗散源函数形式。同时对LAGFD-WAM模式进行了改进并与WAM模式作了三种典型风场下的对比实验和实测结果检验,取得了较好的结果。     

Intercomparison of coastal area morphodynamic models

Five different coastal area morphodynamic models have been set up to run on the same offshore breakwater layout and an intercomparison carried out on the hydrodynamic and morphodynamic output produced by each scheme. In addition, the predicted morphodynamics was checked against available laboratory and field data.It is concluded that the models are capable of producing realistic estimates for the dominant morphodynamic features associated with offshore breakwaters. Coupling of the wave, current and sediment transport components of each scheme is shown to yield bathymetry which attains a state of equilibrium, unlike models which are based on the initial transport field only.     

闽江口水动力和污染扩散数值模拟

本文建立了闽江口二维水动力、污染扩散数值模型，模型采用ＡＤＩ双向隐式求解。在水动力模拟中，对岸界的丁坝有用线性边界进行拟合，并考虑到河口区侧向摩擦作用；在污染扩散模拟中，用动态拟合的方法对浓度水边界进行了较为合理的改进。计算结果表明，本模型是成功的。     

渤海悬浮颗粒物的三维输运模式 I.模式

为了长时间,大范围研究渤海中悬浮物的输运规律,研究应用并改造了备国汉堡大学的粒子追踪悬浮物输运的三维模式,模式中考虑了风、气压等气象要素以外海传入的潮波作用下的三维正压海流对悬浮颗粒物的输运．同时考虑了悬浮颗粒物的学降及再悬浮机制和底质中的细颗粒物的运动,将风浪的作用引入了悬浮物输运的计算,数值模式应用的粒五追踪方法,能较好地反映悬浮物浓度的迅速变化。     

象山港水交换数值研究 Ⅱ.模型应用和水交换研究

使用水平二维对流－扩散型水交换模式模拟研究了象山港的水交换,对不同区域的水交换控制机理作了初步探讨,象山港水交换状况与其控制机制的区域性变化很大。牛鼻水道至佛渡水道是一个潮流较强的潮通道;９０％水交换周期为５天左右。象山港狭湾内水交换周期较长,湾顶处９０％水交换的周期约为８０天左右。     

渤、黄、东海潮汐、潮流的数值模拟与研究

基于FVCOM海洋数值模式,采用高分辨率的三角形网格,对渤、黄、东海的潮汐、潮流进行数值模拟,并通过比较120个沿岸验潮站和14个潮流观测站的实测与模拟结果进行模型验证,两者符合较好。根据模拟结果,给出了四个主要分潮的潮汐同潮图和5m层潮流最大流速及最大潮流同潮时分布。渤、黄、东海共有5个半日分潮和3个全日分潮的独立旋转潮波系统,且都呈逆时针方向旋转;半日潮流和全日潮流各有12个圆流点;在冲绳岛和奄美岛两侧的4个半日潮流圆流点分别呈对称分布,其中有3个为本文首次给出;在日本九州岛西侧还新给出2个全日潮流圆流点。有关它们的存在性需要实测资料的进一步检验。     

Numerical simulation of sloshing waves in a 3D tank based on a finite element method

The sloshing waves in a three dimensional (3D) tank are analysed using a finite element method based on the fully non-linear wave potential theory. When the tank is undergoing two dimensional (2D) motion, the calculated results are found to be in very good agreement with other published data. Extensive calculation has been made for the tank in 3D motion. As in 2D motion, in addition to normal standing waves, travelling waves and bores are also observed. It is found that high pressures occur in various circumstances, which could have important implications for many engineering designs.     

黄海潮生陆架锋的数值模拟研究

采用海洋三维热结构及环流模式,模拟了黄海在Ｍ２潮流混合作用下,夏季温度的分布和变化特征。从数值研究的角度,对黄海陆架水域的海洋锋现象,诸如苏北浅滩外、山东半岛东端、大连、木浦水域的锋面以及锋面沿岸一侧的表层冷水区的成因及分布进行了探讨,模拟结果再现了黄海陆架锋的潮生性质。     

A control-volume finite-element method for three-dimensional multiphase basin modeling

In this paper we describe a 3D control-volume finite-element method to solve numerically the coupled partial differential equations (PDEs) governing geological processes involved in the evolution of sedimentary basins. These processes include sediment deposition and deformation, hydrocarbon generation, multiphase fluid flow, and heat transfer in deforming porous media.     

Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 1: Numerical modelling

The boundary-element method has been widely used as a design tool in the offshore and ship building industry for more than 30 years. Its application to wave energy conversion is, however, more recent. This paper deals with the numerical modelling of a free-floating sloped wave energy device. The power take-off mechanism of the device consists of an immersed tube with a piston sliding inside. The modelling is done using the boundary-element method package WAMIT. The model is first worked out for the case where the axis of the tube is vertical. It is then derived for the tube inclined and successfully verified against numerical benchmark data. A companion paper presents results of a detailed comparison with a physical model study.