Gold ore-forming fluids of the Tanami region, Northern Australia

Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H₂O + CO₂ ± CH₄ ± N₂-bearing fluids. The CO₂-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl₂-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO₂ ± N₂ ± CH₄, with the more deeply formed deposits being enriched in CH₄ and higher level deposits being enriched in CO₂. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N₂. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO₂-bearing inclusions. Calculated δ ¹⁸O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ ¹³C values from CO₂ extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H₂S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.     

Rockfall hazard in the Daisekkei Valley, the northern Japanese Alps, on 11 August 2005

This paper describes a rockfall event in the Daisekkei Valley of Mount Shirouma-dake (2,932 m), the northern Japanese Alps. The rockfall occurred on a steep cliff comprising well-jointed felsites and produced debris of ≥8,000 m³. Most debris was deposited on an elongated snowpatch located immediately beneath the cliff, and it caused casualties among people who were trekking along a trail on the snowpatch. Additionally, a large rock block slipped 1 km on the snowpatch. The rockfall could have been due to the differential retreat of the rockwall, which contains areas of high- and low-density joints. Seasonal and diurnal freeze–thaw activities and snow avalanches and wash appear to be important factors responsible for the retreat. Although some rock blocks that can collapse further remain on the rockwall, the position of the mountain trail in the Daisekkei Valley is fixed. Fundamental reform of tourism systems for climbers, including education on natural hazards, is required.     

Comment on “Is there a paleolimnological explanation for ‘walking on water’ in the Sea of Galilee?”

In a recent paper, Nof et al. (J Paleolimnol 35:417–439, 2006) suggest a physical mechanism which could account for the formation of ice on Lake Kinneret (Sea of Galilee) in northern Israel. Based on the sea surface temperature record of sediment cores from the Mediterranean Sea the authors argue that centennial-scale cold events had the potential to trigger local ‘springs ice’ formation on the lake in the past. Here, we demonstrate that a closer inspection of the paleoceanographic record in combination with correlation and regression analyses of meteorological data provides no evidence for such cold events in the lake region during the last 10,000 years. Thus, the formation of ‘springs ice’ on Lake Kinneret was unlikely at least since the beginning of the Neolithic.     

Time–frequency representation of earthquake accelerograms and inelastic structural response records using the adaptive chirplet decomposition and empirical mode decomposition

In this paper, the adaptive chirplet decomposition combined with the Wigner-Ville transform and the empirical mode decomposition combined with the Hilbert transform are employed to process various non-stationary signals (strong ground motions and structural responses). The efficacy of these two adaptive techniques for capturing the temporal evolution of the frequency content of specific seismic signals is assessed. In this respect, two near-field and two far-field seismic accelerograms are analyzed. Further, a similar analysis is performed for records pertaining to the response of a 20-story steel frame benchmark building excited by one of the four accelerograms scaled by appropriate factors to simulate undamaged and severely damaged conditions for the structure. It is shown that the derived joint time–frequency representations of the response time histories capture quite effectively the influence of non-linearity on the variation of the effective natural frequencies of a structural system during the evolution of a seismic event; in this context, tracing the mean instantaneous frequency of records of critical structural responses is adopted.The study suggests, overall, that the aforementioned techniques are quite viable tools for detecting and monitoring damage to constructed facilities exposed to seismic excitations.     

A contribution to seismic shear design of R/C walls in dual structures

The paper focuses on the seismic response of walls in dual (frame + wall) structures, with particular emphasis on shear behaviour. Although dual structures are widely used in earthquake-resistant medium-rise and high-rise buildings, the provisions of modern seismic codes regarding design of walls for shear are not fully satisfactory, particularly in the (common) case that walls of substantially different length form part of the same structure. Relevant provisions of the leading seismic codes are first summarised and their limitations discussed. Then an extensive parametric study is presented, involving two multistorey dual systems, one with identical walls, and one with walls with unequal length, designed to the provisions of Eurocode 8 for two different ductility classes (H and M). The walls of the same structures are also designed to other methods such as those used in New Zealand and Greece. The resulting different designs are then assessed by subjecting the structures to a suite of strong ground motions, carrying out inelastic time history analysis, and comparing the results against design action effects. It is found that although modern code procedures generally lead to satisfactory performance (differences among them do exist), the design of walls seems to be less appropriate in the case of unequal length walls. For this case a modified procedure is proposed, consisting of an additional factor to account for the relative contribution of walls of the same length to the total base and an improved envelope of wall shears along the height; this improved method seems to work better than the other procedures evaluated herein, but further calibration is clearly required.     

在浏览器中平滑调用MICAPS系统

介绍了通过安装，配置Web服务器软件并编写CGI程序实现在浏览器中平滑调用MICAPS系统的方法，指出融合因特网技术是进行新一代MICAPS系统和天气预报业务平台设计开发的必同之路。     

多层电流片中双撕裂模耦合的压强效应

应用边界层理论研究了等离子体压强对多层电流片中m≥2的双撕裂模耦合的线性和非线性发展行为的影响.考虑等离子体的压强效应，在一阶近似下，解析求得了环位形中双撕裂模的外区匹配参数Δ′.结果表明，当等离子体β<<1时，等离子体压强对双撕裂模的两有理面模之间通过撕裂模外区发生耦合作用的线性行为没有定性影响.虽然等离子体压强将影响双撕裂模耦合的非线性行为，但是主要表现在对其单模项的影响，而对由于两有理面模之间的耦合作用产生的耦合项的影响却很小.     

MORPHOLOGICAL DEVELOPMENT OF ANATURE-LIKE BANK PROTECTION

1 INTRODUCTIONFor the pmpose of river restoration of the river Isar in the city area of Munich several inveshgationswere cAned out at the InshtUte for Hydrosciences, German Armed Forces University Munich. The calculation ofwater level for the differnt planned variants were realized by a 2d mathematical model. Although thesesimulahons were a very helpfol basis for fuIther planing, a physical model was constrUcted in order toinvestigate detalled problems.The main interest was focussed …     

北秦岭地带断裂活动性氡气测试成果分析评价

采用断层气体测试方法, 对北秦岭地带主要断裂及其活动性进行了测试, 首次提出了该区断裂活动性测氡成果判别的相对标准。进而对区内典型的氡气测试成果剖面作了解释分析, 并判别了断裂 (带)的相对活动强弱与活动水平等有关断裂活动性问题。最后, 简要地探讨了在北秦岭地区未来可持续发展中断裂 (带)对其模式及格局的影响。