几内亚福雷卡里亚YML铁矿区的富铁矿床地质特征及找矿前景探讨

YML铁矿区位于几内亚福雷卡里亚省,富铁矿以条带状赤铁矿和铁角砾岩矿为主。矿区内共发育7条矿体,条带状赤铁矿体6条,铁角砾岩矿体1条。条带状赤铁矿体赋存部位多为向形地段,次级紧密褶皱发育,沿走向和倾向有逐渐变薄和尖灭的趋势;铁角砾岩矿体覆盖于地表,以风化壳的形式出现。矿床类型属复合类型,即海底热液喷气沉积叠加后期构造变质型+风化淋滤型。该区具备铁矿形成和保存的地质条件,且已发现具一定储量、品位较高的条带状赤铁矿和大面积的铁角砾岩分布区,区内铁矿找矿远景较好。     

地质雷达电磁干扰分析及在隧洞岩溶探测中的应用

将地质雷达用于千岛湖配水工程某隧洞岩溶探测,分析了倾斜状电磁干扰异常与溶洞雷达异常差异,通过雷达剖面及疑似异常区单道时间-频率谱的分析,推断了隧底岩溶的性质及空间分布特征,含水溶洞在雷达剖面反映为同相轴错断,强振幅及能量高衰减的特性,高频干扰波振幅幅值较异常区小且能量不满足随时间推移逐渐衰减的规律,雷达成果为隧洞安全施工提供了准确的参考。      

IPCC AR6报告解读：气候系统对太阳辐射干预响应

IPCC第六次评估报告（AR6）第一工作组报告评估了太阳辐射干预（Solar radiation modification,SRM）对气候系统和碳循环的影响。在大幅度减排基础上,太阳辐射干预有潜力作为应对气候变化的备用措施。目前,对于太阳辐射干预气候影响的评估都是基于模式模拟结果。评估主要结论如下：太阳辐射干预可以在全球和区域尺度上抵消一部分温室气体增加造成的气候变化（高信度);但是太阳辐射干预无法在全球和区域尺度上完全抵消温室气体增加引起的气候变化（几乎确定);有可能通过适当的太阳辐射干预设计,同时实现多个温度变化减缓目标（中等信度);在高强度温室气体排放情景下,如果太阳辐射干预实施后突然终止,并且这种终止长时间持续,将会造成快速的气候变化（高信度);如果在减排和CO₂移除的情况下,太阳辐射干预的实施强度逐渐减小至零,将显著降低太阳辐射干预突然终止产生的快速气候变化风险（中等信度);太阳辐射干预会通过降温作用,促进陆地和海洋对大气CO₂的吸收（中等信度),但是太阳辐射干预无法缓解海洋酸化（高信度);太阳辐射干预对其他生物化学循环影响的不确定性大。由于对云-气溶胶-辐射过程的相互作用和微物理过程认知有限,目前对平流层气溶胶注入、海洋低云亮化、高层卷云变薄等太阳辐射干预方法的冷却潜力和气候效应的认知还有很大的不确定性。     

微波辐射计在对流天气预报中的应用

选取2016—2018年每年4—9月份RPG-HATPRO型42通道微波辐射计观测的不稳定指数参数(K、SI、CAPE、LI)及水汽参数(IWV、LWP),研究得出各参数触发雷雨大风、短时强降水的阈值条件为K>37℃、SI<-1℃、IWV>60 kg/m~2、LWP>400 g/m~2,而LI、CAPE无法对3种天气类型进行区分。利用费舍判别分析方法,将不稳定指数参数及水汽参数作为预报因子,建立预报方程并进行检验,结果表明:二级判别方程预测对流天气的准确率为76%,可以作为预报对流天气的辅助工具;多级判别方程不能很好地区分3种天气类型,但将其作为修正后的二级判别方程使用,能提高对流天气的测中概率。     

A CRPS-Based Spatial Technique for the Verification of Ensemble Precipitation Forecasts

Traditional precipitation skill scores are affected by the well-known“double penalty”problem caused by the slight spatial or temporal mismatches between forecasts and observations. The fuzzy (neighborhood) method has been proposed for deterministic simulations and shown some ability to solve this problem. The increasing resolution of ensemble forecasts of precipitation means that they now have similar problems as deterministic forecasts. We developed an ensemble precipitation verification skill score, i.e., the Spatial Continuous Ranked Probability Score (SCRPS), and used it to extend spatial verification from deterministic into ensemble forecasts. The SCRPS is a spatial technique based on the Continuous Ranked Probability Score (CRPS) and the fuzzy method. A fast binomial random variation generator was used to obtain random indexes based on the climatological mean observed frequency, which were then used in the reference score to calculate the skill score of the SCRPS. The verification results obtained using daily forecast products from the ECMWF ensemble forecasts and quantitative precipitation estimation products from the OPERA datasets during June-August 2018 shows that the spatial score is not affected by the number of ensemble forecast members and that a consistent assessment can be obtained. The score can reflect the performance of ensemble forecasts in modeling precipitation and thus can be widely used.     

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.     

The Digital Belt and Road program in support of regional sustainability

The Belt and Road initiative has a significant focus on infrastructure, trade, and economic development across a vast region, and it also provides significant opportunities for sustainable development. The combined pressure of climate variability, intensified use of resources, and the fragility of ecosystems make it very challenging, however, to achieve future sustainability. To develop the path in a sustainable way, it is important to have a comprehensive understanding of these issues across nations and evaluate them in a scientific and well-informed approach. In this context, the Digital Belt and Road (DBAR) program was initiated as an international venture to share expertise, knowledge, technologies, and data to demonstrate the role of Earth observation science and technology and big Earth data applications to support large-scale development. In this paper, we identify pressing challenges, present the research priorities and foci of the DBAR program, and propose solutions where big Earth data can make significant contributions. This paper calls for further joint actions and collaboration to build a digital silk road in support of sustainable development at national, regional and global levels.     

Geometric-constrained multi-view image matching method based on semi-global optimization

Targeting at a reliable image matching of multiple remote sensing images for the generation of digital surface models, this paper presents a geometric-constrained multi-view image matching method, based on an energy minimization framework. By employing a geometrical constraint, the cost value of the energy function was calculated from multiple images, and the cost value was aggregated in an image space using a semi-global optimization approach. A homography transform parameter calculation method is proposed for fast calculation of projection pixel on each image when calculating cost values. It is based on the known interior orientation parameters, exterior orientation parameters, and a given elevation value. For an efficient and reliable processing of multiple remote sensing images, the proposed matching method was performed via a coarse-to-fine strategy through image pyramid. Three sets of airborne remote sensing images were used to evaluate the performance of the proposed method. Results reveal that the multi-view image matching can improve matching reliability. Moreover, the experimental results show that the proposed method performs better than traditional methods.     

Super-resolution enhancement of UAV images based on fractional calculus and POCS

Abstract

A super-resolution enhancement algorithm was proposed based on the combination of fractional calculus and Projection onto Convex Sets (POCS) for unmanned aerial vehicles (UAVs) images. The representative problems of UAV images including motion blur, fisheye effect distortion, overexposed, and so on can be improved by the proposed algorithm. The fractional calculus operator is used to enhance the high-resolution and low-resolution reference frames for POCS. The affine transformation parameters between low-resolution images and reference frame are calculated by Scale Invariant Feature Transform (SIFT) for matching. The point spread function of POCS is simulated by a fractional integral filter instead of Gaussian filter for more clarity of texture and detail. The objective indices and subjective effect are compared between the proposed and other methods. The experimental results indicate that the proposed method outperforms other algorithms in most cases, especially in the structure and detail clarity of the reconstructed images.     

Modelling coastal land use change by incorporating spatial autocorrelation into cellular automata models

This paper presents a spatial autoregressive (SAR) method-based cellular automata (termed SAR-CA) model to simulate coastal land use change, by incorporating spatial autocorrelation into transition rules. The model captures the spatial relationships between explained and explanatory variables and then integrates them into CA transition rules. A conventional CA model (LogCA) based on logistic regression (LR) was studied as a comparison. These two CA models were applied to simulate urban land use change of coastal regions in Ningbo of China from 2000 to 2015. Compared to the LR method, the SAR model yielded smaller accumulated residuals that showed a random distribution in fitting the CA transition rules. The better-fitting SAR model performed well in simulating urban land use change and scored an overall accuracy of 85.3%, improving on the LogCA model by 3.6%. Landscape metrics showed that the pattern generated by the SAR-CA model has less difference with the observed pattern.