黄土山区煤层群分层开采地表位移规律分析

为了研究黄土山区地形对煤层群开采地表位移的影响,以榆林某矿为地质原型,利用数值软件模拟地表为近水平、正坡、负坡、凸面和凹面五种地形条件下煤层群开采。结果表明:黄土山区地形的变化,对煤层群开采顶板垂直应力影响不明显,对地表位移影响较大;单向坡开采,斜坡滑移引起的下沉量在坡顶与开采沉陷量形成“叠加”,在坡底形成“抵消”;在组合坡中,煤层群开采地表位移量相差很大,说明在变坡点附近地表位移较为复杂。     

分层水体对表层辐照度比影响的蒙特卡罗分析

众多海洋观测数据表明,在真光层深度范围内,海水固有光学特性和光学有效组分的剖面分层分布是广泛存在的,而很多遥感反演模型的建立基于均一分布假设,尤其是在经验模型的建立中,往往只利用某一深度或各深度平均的光学有效组分浓度与水体光谱的统计关系。文章通过模拟平静水面水下光的辐射传输,分别研究了叶绿素、无机悬浮物浓度垂直分布结构对水下辐照度比的影响,并对比了两类分层水体权重函数等效浓度计算式及相应水下辐照度比,结果表明,对于分层水体,透射深度和层化强度是影响等效浓度值计算误差的主要因素,透射越深,表层层化越强,水体层化对水下辐照度比的影响就越大,但其计算误差也越大。Gondon等效浓度计算结果比较接近实际值,而Zaneveld计算式则高估了分层水体的等效浓度值。     

银洞坡层控金矿的矿田构造及其控矿作用辨识

本文客观地分析了野外和室内研究资料后指出,银洞坡大型金矿所在的河前庄背斜连同该背斜转折端和两翼所发育的各种平移断层、平移正断层、逆冲断层均形成于主成矿期之后,不具前人所认定的控矿意义,其演化系列是:河前庄背斜→含矿共轭平移断层→无矿共轭平移断层→平移正断层→逆冲断层系,除含矿共轭平移断层之外,它们主要起改造矿体的作用。其中河前庄背斜起有利的改造作用,而各类断层主要起破坏作用。     

Sampling and Discrete Choice Analysis

Samples used to estimate discrete choice models in geography and regional science are typically assumed to be simple random samples. This assumption is not always met with existing samples. Furthermore, data collection is usually less costly if a stratified sampling strategy is adopted. Existing sampling theory suggests that stratified sampling can affect the consistency of parameter estimates. This paper reviews the salient points of this theory and relates theory to practice by means of a simple example on housing choice by elderly.     

Characteristics and origins of lee-side stratification sequences in late pleistocene drumlins,northern Ireland

Spindle- and parabolic-shaped drumlins examined at fifty-five localities in northern Ireland possess stratification sequences on their lee-side flanks. These forms lack the distinctive steep stoss- and tapering lee-ends of classical drumlins and tend to occur in linear zones transverse to late Pleistocene ice-flow. In most cases (90 per cent) the stratified deposits infill embayments excavated in the lee-side of barkhanoid forms and, in the remainder (10 per cent), they are superimposed on the lee-side of whaleback forms. The stratification sequences developed as a result of sedimentation in interconnected subglacial water-filled cavities and are unlike remanie proglacial sediments moulded by ice into drumlin form. Stratigraphic evidence indicates that the lee-side sequences developed during drumlin streamlining, which supports the view that subglacial hydraulic processes played an important role in drumlin formation.     

城市规划管理信息数据库的设计与建立

以某市城市规划地理信息数据库的设计与建立为例,主要阐述了该数据库的功能设计,并通过入库处理,将分层数据导入到对应数据库中。根据数据库设计要求,按空间单元划分存储单元建立各个子数据库,或者将所有数据合并为一个存储单元建立无缝数据库。从而实现图形与属性数据库的建立。     

An optimal parameters-based geographical detector model enhances geographic characteristics of explanatory variables for spatial heterogeneity analysis: cases with different types of spatial data

ABSTRACT

Spatial heterogeneity represents a general characteristic of the inequitable distributions of spatial issues. The spatial stratified heterogeneity analysis investigates the heterogeneity among various strata of explanatory variables by comparing the spatial variance within strata and that between strata. The geographical detector model is a widely used technique for spatial stratified heterogeneity analysis. In the model, the spatial data discretization and spatial scale effects are fundamental issues, but they are generally determined by experience and lack accurate quantitative assessment in previous studies. To address this issue, an optimal parameters-based geographical detector (OPGD) model is developed for more accurate spatial analysis. The optimal parameters are explored as the best combination of spatial data discretization method, break number of spatial strata, and spatial scale parameter. In the study, the OPGD model is applied in three example cases with different types of spatial data, including spatial raster data, spatial point or areal statistical data, and spatial line segment data, and an R “GD” package is developed for computation. Results show that the parameter optimization process can further extract geographical characteristics and information contained in spatial explanatory variables in the geographical detector model. The improved model can be flexibly applied in both global and regional spatial analysis for various types of spatial data. Thus, the OPGD model can improve the overall capacity of spatial stratified heterogeneity analysis. The OPGD model and its diverse solutions can contribute to more accurate, flexible, and efficient spatial heterogeneity analysis, such as spatial patterns investigation and spatial factor explorations.     

Rhyolitic fallout and pyroclastic density current deposits from a phreatoplinian eruption in the eastern Aegean Sea, Greece

The Kos Plateau Tuff consists of pyroclastic deposits from a major Quaternary explosive rhyolitic eruption, centred about 10 km south of the island of Kos in the eastern Aegean, Greece. Five main units are present, the first two (units A and B) were the product of a phreatoplinian eruption. The eruption style then changed to `dry' explosive style as the eruption intensity increased forming a sequence of ignimbrites and initiating caldera collapse. The final waning phase returned to phreatomagmatic eruptive conditions (unit F). The phreatomagmatic units are fine grained, poorly sorted, and dominated by blocky vitric ash, thickly ash-coated lapilli and accretionary lapilli. They are non-welded and were probably deposited at temperatures below 100°C. All existing exposures occur at distances between 10 km and 40 km from the inferred source. Unit A is a widespread (>42 km from source), thin (upwind on Kos) to very thick (downwind), internally laminated, dominantly ash bed with mantling, sheet-like form. Upwind unit A and the lower and middle part of downwind unit A are ash-rich (ash-rich facies) whereas the upper part of downwind unit A includes thin beds of well sorted fine pumice lapilli (pumice-rich facies). Unit A is interpreted to be a phreatoplinian fall deposit. Although locally the bedforms were influenced by wind, surface water and topography. The nature and position of the pumice-rich facies suggests that the eruption style alternated between `wet' phreatoplinian and `dry' plinian during the final stages of unit A deposition.Unit B is exposed 10–19 km north of the inferred source on Kos, overlying unit A. It is a thick to very thick, internally stratified bed, dominated by ash-coated, medium and fine pumice lapilli in an ash matrix. Unit B shows a decrease in thickness and grain size and variations in bedforms downcurrent that allow definition of several different facies and laterally equivalent facies associations. Unit B ranges from being very thick, coarse and massive or wavy bedded in the closest outcrops to source, to being partly massive and partly diffusely stratified or cross-bedded in medial locations. Pinch and swell, clast-supported pumice layers are also present in medial locations. In the most distal sections, unit B is stratified or massive, and thinner and finer grained than elsewhere and dominated by thickly armoured lapilli. Unit B is interpreted to have been deposited from an unsteady, density stratified, pyroclastic density current which decelerated and progressively decreased its particle load with distance from source. Condensation of steam during outflow of the current promoted the early deposition of ash and resulted in the coarser pyroclasts being thickly ash-coated. The distribution, texture and stratigraphic position of unit B suggest that the pyroclastic density current was generated from collapse of the phreatoplinian column following a period of fluctuating discharge when the eruptive activity alternated between `wet' and `dry'. The pyroclastic density current was transitional in particle concentration between a dilute pyroclastic surge and a high particle concentration pyroclastic flow. Unidirectional bedforms in unit B suggest that the depositional boundary was commonly turbulent and in this respect did not resemble conventional pyroclastic flows. However, unit B is relatively thick and poorly sorted, and was deposited more than 19 km from source, implying that the current comprised a relatively high particle concentration and in this respect, did not resemble a typical pyroclastic surge.     

COULOMB STRESS CHANGE ON ACTIVE FAULTS IN SICHUAN-YUNNAN REGION AND ITS IMPLICATIONS FOR SEISMIC HAZARD

Coulomb stress change on active faults is critical for seismic hazard analysis and has been widely used at home and abroad. The Sichuan-Yunnan region is one of the most tectonically and seismically active regions in Mainland China, considering some highly-populated cities and the historical earthquake records in this region, stress evolution and seismic hazard on these active faults capture much attention. From the physical principal, the occurrence of earthquakes will not only cause stress drop and strain energy release on the seismogenic faults, but also transfer stress to the surrounding faults, hence alter the shear and normal stress on the surrounding faults that may delay, hasten or even trigger subsequent earthquakes. Previously, most studies focus on the coseismic Coulomb stress change according to the elastic dislocation model. However, the gradually plentiful observation data attest to the importance of postseismic viscoelastic relaxation effect during the analysis of seismic interactions, stress evolution along faults and the cumulative effect on the longer time scale of the surrounding fault zone. In this paper, in order to assess the seismic hazard in Sichuan-Yunnan region, based on the elastic dislocation theory and the stratified viscoelastic model, we employ the PSGRN/PSCMP program to calculate the cumulative Coulomb stress change on the main boundary faults and in inner blocks in this region, by combining the influence of coseismic dislocations of the M≥7.0 historical strong earthquakes since the Yongsheng M7.8 earthquake in 1515 in Sichuan-Yunnan region and M≥8.0 events in the neighboring area, and the postseismic viscoelastic relaxation effect of the lower crust and upper mantle. The results show that the Coulomb stress change increases significantly in the south section of the Xianshuihe Fault, the Anninghe Fault, the northern section of the Xiaojiang Fault, the southern section of the Longmen Shan Fault, the intersection of the Chuxiong-Jianshui Fault and the Xiaojiang Fault, and the Shawan section of the Litang Fault, in which the cumulative Coulomb stress change exceeds 0.1MPa. The assuming different friction coefficient has little effect on the stress change, as for the strike-slip dominated faults, the shear stress change is much larger than the normal stress change, and the shear stress change is the main factor controlling the Coulomb stress change on the fault plane. Meanwhile, we compare the Coulomb stress change in the 10km and 15km depths, and find that for most faults, the results are slightly different. Additionally, based on the existing focal mechanism solutions, we add the focal mechanism solutions of the 5 675 small-medium earthquakes(2.5≤M≤4.9)in Sichuan-Yunnan region from January 2009 to July 2019, and invert the directions of the three principal stresses and the stress shape factor in 0.1°×0.1° grid points; by combining the grid search method, we compare the inverted stress tensors with that from the actual seismic data, and further obtain the optimal stress tensors. Then, we project the stress tensors on the two inverted nodal planes separately, and select the maximum Coulomb stress change to represent the stress change at the node. The results show that the cumulative Coulomb stress change increase in the triple-junction of Sichuan-Yunnan-Tibet region is also significant, and the stress change exceeds 0.1MPa. Comprehensive analysis of the Coulomb stress change, seismic gaps and seismicity parameters suggest that more attention should be paid to the Anninghe Fault, the northern section of the Xiaojiang Fault, the south section of the Xianshuihe Fault, the southern section of the Longmen Shan Fault and the triple-junction of the Sichuan-Yunnan-Tibet region. These results provide a basis for future seismic hazard analysis in the Sichuan-Yunnan region.     

塔里木盆地东部地区寒武系-奥陶系白云岩特征及成因

通过对塔东低凸起带寒武系-奥陶系白云岩的岩石学特征、碳氧同位素特征、锶同位素比值特征、有序度等的分析,认为塔东地区带寒武系-奥陶系准同生阶段的泥-粉晶白云岩由受潮汐作用的海水泵汲作用形成;成岩阶段的细-中晶白云岩、粗-巨晶白云岩是在埋藏成岩环境中经过调整白云岩化以及成岩后期的外来热液作用引起的埋藏热液白云岩化作用形成。