Chemical and physical properties affecting strontium distribution coefficients of surficial-sediment samples at the Idaho National Engineering and Environmental Laboratory, Idaho

 The U.S. Geological Survey and Idaho State University, in cooperation with the U.S. Department of Energy, conducted a study to determine strontium distribution coefficients (K_ds) of surficial sediments at the Idaho National Engineering and Environmental Laboratory (INEEL). Batch experiments using synthesized aqueous solutions were used to determine K_ds, which describe the distribution of a solute between the solution and solid phase, of 20 surficial-sediment samples from the INEEL. The K_ds for the 20 surficial-sediment samples ranged from 36 to 275 ml/g. Many properties of both the synthesized aqueous solutions and sediments used in the experiments also were determined. Solution properties determined were initial and equilibrium concentrations of calcium, magnesium, and strontium, pH and specific conductance, and initial concentrations of potassium and sodium. Sediment properties determined were grain-size distribution, bulk mineralogy, whole-rock major-oxide and strontium and barium concentrations, and Brunauer-Emmett-Teller (BET) surface area. Solution and sediment properties were correlated with strontium K_ds of the 20 surficial sediments using Pearson correlation coefficients. Solution properties with the strongest correlations with strontium K_ds were equilibrium pH and equilibrium calcium concentration correlation coefficients, 0.6598 and –0.6518, respectively. Sediment properties with the strongest correlations with strontium K_ds were manganese oxide (MnO), BET surface area, and the >4.75-mm-grain-size fraction correlation coefficients, 0.7054, 0.7022, and –0.6660, respectively. Effects of solution properties on strontium K_ds were interpreted as being due to competition among similarly charged and sized cations in solution for strontium-sorption sites; effects of sediment properties on strontium K_ds were interpreted as being surface-area related. Multivariate analyses of these solution and sediment properties resulted in r² values of 0.8071 when all five properties were used and 0.8043 when three properties, equilibrium pH, MnO, and BET surface area, were used. Received: 30 November 1998 · Accepted: 16 February 1999     

The use of remotely sensed land cover to derive floodplain friction coefficients for flood inundation modelling

Remotely sensed land cover was used to generate spatially‐distributed friction coefficients for use in a two‐dimensional model of flood inundation. Such models are at the forefront of research into the prediction of river flooding. Standard practice, however, is to use single (static) friction coefficients on both the channel and floodplain, which are varied in a calibration procedure to provide a “best fit” to a known inundation extent. Spatially‐distributed friction provides a physically grounded estimate of friction that does not require fitting to a known inundation extent, but which can be fitted if desired. Remote sensing offers the opportunity to map these friction coefficients relatively straightforwardly and for low cost. Inundation was predicted using the LISFLOOD‐FP model for a reach on the River Nene, UK. Friction coefficients were produced from land cover predicted from Landsat TM imagery using both ML and fuzzy c‐means classifiction. The elevetion data used were from combined contour and differential global positioning system (GPS) elevation data. Predicted inundation using spatially‐distributed and static friction were compared. Spatially‐distributed friction had the greatest effect on the timing of flood inundation, but a small effect on predicted inundation extent. The results indicate that spatially‐distributed friction should be considered where the timing of initial flooding (e.g. for early warning) is important. Copyright © 2007 John Wiley & Sons, Ltd.     

VTI介质qP波方程高精度有限差分算子

波动方程有限差分法是一种使用广泛的地震波数值模拟方法.但是有限差分法本身固有存在着数值频散问题,会降低地震波场模拟的精度与分辨率.为了克服常规有限差分算子的数值频散,本文针对VTI介质地震波数值模拟问题,构造了频率-空间域qP波波动方程高精度有限差分优化算子,根据最优化理论中高斯-牛顿法确定了高精度有限差分算子的优化系数.利用常规差分算子和高精度优化差分算子对归一化相速度的频散关系精度进行了对比分析,并对均匀各向同性介质和均匀VTI介质中的qP波地震波场进行了有限差分数值模拟,通过频散关系精度分析和波场数值模拟结果表明：有限差分优化算子具有较高的波场数值模拟精度,有效压制了传统有限差分算子数值模拟中的数值频散现象,提高了有限差分算子精度,为VTI介质频率-空间域qP波正演模拟奠定了基础.     

中国东部主要河流稀土元素地球化学特征

在2007年底至2008年初的枯水期间,系统采集了中国东部流域面积和径流量较大的33条河流沉积物、悬浮颗粒物和水样,采用等离子质谱法、X荧光光谱法等方法测定了14种稀土元素含量以及常量组分和水体pH值等理化指标。研究发现中国河流稀土元素浓度总体高于世界均值,且南方河流沉积物、悬浮物稀土元素含量高于北方河流,南方河流悬浮物态中稀土、重稀土呈现一定程度的相对富集,与我国上地壳稀土丰度和稀土矿产种类的南北分异相吻合。展示了以中国东部泥质岩稀土元素丰度标准化后的稀土配分模式及Ce、Eu异常特征,发现河流沉积物的中、重稀土元素相对富集,悬浮物轻稀土相对富集,溶解相重稀土富集的特征;北方河流溶解相稀土元素浓度明显大于南方河流,且除小清河外,溶解相Eu不同于沉积物与悬浮物而呈强烈的正异常,主要与河水理化性质影响下的稀土分异有关。研究发现小清河等少数河流沉积物中稀土元素为异常高值,经Al标准化处理、计算拟合剩余值后,认为小清河等河流稀土元素已受人为污染的影响。     

海南岛三叠纪中基性岩的年代学、地球化学及其地质意义

辉长岩大多为地幔岩石部分熔融的产物,辉绿岩脉及碱性正长岩的形成通常与伸展构造有关,本文对海南岛万宁辉长岩及辉绿岩脉和分界洲正长岩进行了系统的年代学和岩石地球化学研究,并以此来讨论其构造意义。LA-ICP-MS锆石U-Pb定年结果表明,万宁辉长岩及辉绿岩脉形成约在240 Ma,分界洲正长岩形成约在231 Ma,主量元素特征表明万宁辉长岩和辉绿岩分别属碱性系列和亚碱性系列,分界洲正长岩属于典型的碱性岩浆岩。万宁辉长岩及辉绿岩脉的稀土元素具有轻稀土富集的特点(LREE/HREE=7.22～8.50和8.11～11.10),微量元素具有岛弧型火山岩的特征,富集大离子亲石元素K、Rb、Ba、Th,贫高场强元素Nb、Ta和Zr、Hf;分界洲正长岩的微量元素特征显示出与A型花岗岩类似的特征。海南岛三叠纪中基性岩如分界洲正长岩和万宁辉长岩及辉绿岩脉形成的构造背景为陆内伸展环境,指示海南岛在240～230 Ma处于印支造山运动的应力松弛阶段。     

太湖浮游藻类的后向散射分离及其叶绿素a浓度反演

浮游藻类的后向散射是水体光谱构成的重要组成部分,作为水体辐射传输模型中的重要参数,高精度的藻类后向散射系数对水体叶绿素a浓度的遥感反演精度至关重要。本文以简化的辐射传输模型-生物光学模型为基础,尝试性分离了太湖浮游藻类的后向散射系数。通过藻类后向散射规律分析,建立了浮游藻类吸收、后向散射特征的叶绿素a反演模型,改善了叶绿素a浓度的遥感反演精度。分析表明：藻类颗粒物的后向散射系数与吸收系数之间存在反比关系,且在560 nm、700 nm附近存在明显的散射峰,与叶绿素a浓度之间相关性显著;低密度藻类水体总悬浮颗粒的后向散射以非色素颗粒为主导,适合采用经典的指数模型模拟后向散射系数,而藻类密度较高的富营养化水体,水体总悬浮颗粒的后向散射以藻类颗粒为主导,传统的指数模型已不适用;采用分离藻类后向散射系数的方法,使得叶绿素a浓度的反演值与真实值相关系数从0.66提高到0.98,相对误差从55%降低到38%,均方根误差(RMSE)也由60.95 μg/L降低至13.98 μg/L。其真实性检验表明,与经典指数模型方法相比,利用藻类颗粒后向散射分离方法反演叶绿素a浓度,能够显著改善反演精度。     

高温高压下流体中电解质活度系数的确定

高温高压下流体中电解质的活度系数在地球化学领域有着广泛的应用。本实验测量了100—500℃、0．11—12GPa下0．01mol／L KCl溶液的电导率,并利用Hueckel方程由实验确定的摩尔电导和极限摩尔电导计算出了KCl的平均摩尔活度系数。平均摩尔活度系数随温度升高而减小,随压力升高而增大,而在高温高压下随温度压力的升高几乎保持恒定。     

近断层地震动的频谱周期参数和非平稳特征分析

分析地震动的频谱周期参数和频率非平稳特征,是地震危险性分析和结构抗震设计的重要内容.本文对近断层地震动记录按照不同的运动特征分组,进行了Hilbert-Huang变换分析.结合相关的定义得到了表征地震动频谱特性的7个周期参数,包括:Fourier幅值谱平均周期Tm、Hilbert边际谱平均周期Tmh、特征周期Tc、卓越周期等,并计算了地震动的Hilbert谱瞬时频率时程变异系数.计算结果表明,从整体上把握地震动频谱特性的三个周期参数Tm 、Tmh 和Tc适合于表征近断层地震动的频谱成份.近断层地震动的频率非平稳特征显著,Hilbert谱瞬时频率变异系数良好地反映了地震动的频率非平稳性质和程度.而且,考察了近断层地震动运动特征对地震动频谱周期参数和频率非平稳性的影响.     

On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

Binary coefficients: A theoretical and empirical study

Binary coefficients can be assigned to several categories on the basis of algebraic and conceptual properties. The phi coefficient of association is related algebraically to the chi-square statistic for 2-by-2 contingency tables, and use of this coefficient in cluster analysis permits the objective, nonarbitrary partitioning of objects among groups on the basis of previously selected levels of significant, positive association. Similarity, matching, and distance coefficients possess neither conceptual nor operational statistical meaning for many geological data sets. The weighted pair group method and flexible clustering strategy may give an overly conservative partitioning of objects among groups. Clustering by the unweighted pair group method, using the phi coefficient, is recommended for the analysis of biostratigraphic and paleoecologic presence—absence data.