地—空界面天然中子辐射场的扰动及其环境意义

介绍了地—空界面天然中子流的来源和轻便型天然中子流测量仪器。论述了地—空界面天然中子辐射场的扰动。理论与长期观测表明,在地—空界面上天然中子流注量率随高程的增加而呈指数规律增加,而在近地表(20m内)却随距地面高度的增加而呈指数规律减少;天然中子流注量率与大气压力呈负相关关系,气压系数为(-0.060～-0.064)中子计数/30min/kPa;地—空界面天然中子流的纬度效应与高空中更显著;天然中子流注量率异常与气象的变化密切相关;地表介质的含水率增高,则地—空界面上升快中子流明显降低。通过对地一空界面天然中子流测量,可以揭示气象的瞬态变化、确定地表介质的含水率的关系,以及在地震预报与环境电离辐射评价方面具有重要的科学意义与实用价值。     

金沙江流域(云南境内)山地灾害危险性评价

云南境内的金沙江流域是斜坡不稳定的敏感区,根据1988-2000年的区域调查和统计,区内发育山地灾害点1697处,其中流域面积大于1km2的泥石流沟808条,体积大于1×104m3的滑坡580处,体积大于1000m3的崩塌309处。用于山地灾害危险性评价的主要敏感因子包括岩土体类型、山坡坡度、降雨、土地利用、地震烈度和人类活动。在对这些因子进行了敏感性评价的基础上,应用GIS对敏感因子集成评价而产生了云南金沙江流域山地灾害危险性评价图。评价结果表明:高危险区面积占全区面积6464km2的8 77%,中危险区占全区总面积的41 51%,低危险区占41 12%,无危险区占8 60%。山地灾害危险性评价图可以帮助规划者或工程师在土地发展规划中选择最佳建设场所,以减轻灾害的影响。     

城市建筑环境--浅谈长沙市中医医院方案设计

本文以长沙市中医医院的方案设计为例,对如何利用自然环境划分、组织建筑空间以及结合当地人文、地理环境塑造合理的建筑造型进行了详尽的描述。     

A large landslide on the urban fringe of metropolitan Phoenix, Arizona

A granitic rock avalanche, one of the largest Quaternary landslides in Arizona outside the Grand Canyon with a volume of approximately 5.25 M m³ and a width a little under 0.5 km, ran 1 km from the eastern McDowell Mountains. With lateral levees and pressure ridges, the rock avalanche deposit displays many features found on classic sturzstroms. Failure occurred along a major joint plane paralleling the slope with a dip of 44°, when a major base level lowering event in the Salt River system would have undermined the base of the failed slope, and probably during a period of more moisture than normally available in the present-day arid climate. Failure at the subsurface weathering front highlights the importance of the dramatic permeability change between grussified regolith and relatively fresh bedrock. Rock varnish microlaminations (VMLs) dating, in concert with other geomorphic evidence, suggests that the rock avalanche deposit is slightly older than 500 ka. The rock vanish results also have important implications for sampling strategies designed to use cosmogenic nuclide to date Quaternary landslide deposits. Discovery of a large landslide in close proximity to the extending urban fringe of metropolitan Phoenix argues for a more careful analysis of landslide hazards in the region, especially where rapid development excavates bedrock at the base of steep mountain slopes and where the subsurface weathering front is near the surface.     

Effect of vegetation with different evolution degree on soil organic matter in a semi-arid environment (Cabo de Gata-Níjar Natural Park, SE Spain)

The organic matter of the surface horizons of soils developed below scrub vegetation in a Mediterranean semi-arid area of great environmental interest (Cabo de Gata-Níjar Natural Park, SE Spain) has been studied. The study mainly concentrates on examining the influence of two vegetation types, one evolved (according to its successional stage), and the other clearly degraded as a result of prior removal of vegetation. In spite of the homogeneity in the results obtained from the analysis of the organic matter from the soils studied, a relationship may be established between vegetation biotype and characteristics and evolution of the soil organic matter. The evolved vegetation results in the presence in the soil of a somewhat more evolved and stable organic matter (demonstrated by certain chemical and microbiological aspects), resulting in a greater degree of humification, thus favouring the protection of the soil and the ecosystem as a whole. Hence, the presence of degraded vegetation might lead to soil degradation, something that is unsustainable in semi-arid areas that are particularly fragile in nature.     

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.     

Revised runoff curve number for runoff prediction in the Loess Plateau of China

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.     

高分一号遥感影像地质灾害信息提取方法研究

山区地质灾害发生频繁,受灾范围大,危害严重。提取地质灾害信息、估算受灾情况,对救灾工作极为重要。传统的遥感人工解译方法速度慢、效率低;计算机自动解译速度快但解译精度受影像质量影响大,大范围地区很难建立起普适性的解译模型。本文利用洮南市西部高分一号遥感数据,结合DEM生成三维影像,建立解译标志,解译基础地质信息,分析地质灾害成因;根据研究区泥石流地质灾害的主要影像特征,提取影像的分类属性,基于面向对象的分类方法,建立信息提取模型,快速提取出地质灾害敏感区域;再进行人机交互,精确提取出地质灾害的类型和范围,通过野外验证,该方法十分可靠,为大范围地质灾害信息快速提取和灾后救援提供科学依据。     

Impact of gneissic layering and localized incipient melting upon melt flow during experimental deformation of migmatites

In this study, we test experimentally the role of compositional layering as a key parameter for controlling melt flow in a natural migmatite during coaxial deformation. We performed in – situ pure-shear experiments on two natural gneisses. The first gneiss is weakly foliated with minerals homogenously distributed. The second gneiss shows a pronounced compositional layering of alternating quartz – feldspar – rich and biotite – muscovite – rich layers. Experimental conditions were selected to obtain homogeneous melt distribution in the homogeneous gneiss and heterogeneous melt distribution in the layered gneiss. Initial melt distribution is not modified by deformation in experiments on the homogeneous gneiss, implying that melting products did not migrate from their initiation sites. In contrast, melt flowed in shear zones or in inter-boudin positions during experimental deformation of the heterogeneous gneiss. These experiments attest to the strong influence of initial gneissic layering on melting pattern, melt segregation and flow during deformation of partially molten rocks.     

Mesh-free analysis applied in reinforced soil slopes

One of the most applicable geotechnical structures whose analysis is carried out through iterative procedures is the reinforced soil slope. In this regard, the most successful method for the reinforced slope analysis through numerical methods is the finite element method whose updating mesh may result in some difficulties. In this study, the Natural Element Method (NEM), which is a mesh-free method, in conjunction with conventional limit equilibrium is implemented to find the slip surface in the reinforced slopes. Results demonstrate the convergence and preciseness of the present method in comparison with the other numerical methods and conventional limit equilibrium method.