湍流混合动力学机理研究

在分析传统混合动力学机理基础上,通过宏观混合与微观混合时间量级的对比,提出了湍流条件下,涡流扩散主导宏观混合,分子扩散主导微观混合,而混合过程由宏观混合主导,欧拉数Eu可作为混合效果的控制指标,并通过3种不同容积反应器的混合搅拌试验,进一步证实了该指标的实用性。     

A Case Study Of An On-Ice Air Flow Over The Arctic Marginal Sea-Ice Zone

A case study of warm air advection over the Arctic marginalsea-ice zone is presented, based on aircraft observations with direct flux measurements carriedout in early spring, 1998. A shallow atmospheric boundary layer (ABL) was observed, which wasgradually cooling with distance downwind of the ice edge. This process was mainly connected with astrong stable stratification and downward turbulent heat fluxes of about 10–20 W m^-2, but wasalso due to radiative cooling. Two mesoscale models, one hydrostatic and the other non-hydrostatic,having different turbulence closures, were applied. Despite these fundamental differences betweenthe models, the results of both agreed well with the observed data. Various closure assumptions had amore crucial influence on the results than the differences between the models.Such an assumption was, for example,the parameterization of the surface roughness for momentum (z₀) and heat (z_T). This stronglyaffected the wind and temperature fields not only close to the surface but also within and abovethe temperature inversion layer. The best results were achieved using a formulation for z₀ that took intoaccount the form drag effect of sea-ice ridges together withz_T = 0.1z₀. The stability within theelevated inversion strongly depended on the minimum eddy diffusivity K_min. A simple ad hocparameterization seems applicable, where K_min is calculated as 0.005 timesthe neutral eddy diffusivity. Although the longwave radiative cooling was largest within the ABL, theapplication of a radiation scheme was less important there than above the ABL. This was related to theinteraction of the turbulent and radiative fluxes. To reproduce the strong inversion, it wasnecessary to use vertical and horizontal resolutions higher than those applied in most regional andlarge-scale atmospheric models.     

First-Order Chemistry in the Surface-Flux Layer

We have discussed the behavior of a non-conserved scalar in the stationary, horizontally homogeneous, neutral surface-flux layer and, on the basis of conventional second-order closure, derived analytic expressions for flux and for mean concentration of a gas, subjected to a first-order removal process. The analytic flux solution showed a clear deviation from the constant flux, characterizing a conserved scalar in the surface-flux layer. It decreases with height and is reduced by an order of magnitude of the surface flux at a height equal to about the typical mean distance a molecule can travel before destruction. The predicted mean concentration profile, however, shows only a small deviation from the logarithmic behavior of a conserved scalar. The solution is consistent with assuming a flux-gradient relationship with a turbulent diffusivity corrected by the Damköhler ratio, the ratio of a characteristic turbulent time scale and the scalar mean lifetime. We show that if we use only first-order closure and neglect the effect of the Damköhler ratio on the turbulent diffusivity we obtain another analytic solution for the profiles of the flux and the mean concentration which, from an experimental point of view, is indistinguishable from the first analytic solution. We have discussed two cases where the model should apply, namely NO which, by night, is irreversibly destroyed by interaction with mainly O₃ and the radioactive ²²⁰Rn. Only in the last case was it possible to find data to shed light on the validity of our predictions. The agreement seemed such that a falsification of our model was impossible. It is shown how the model can be used to predict the surface flux of ²²⁰Rn from measured concentration profiles.     

AN EVALUATION OF SEVERAL TURBULENCE SCHEMES FOR THE PREDICTION OF MEAN AND TURBULENT FIELDS IN COMPLEX TERRAIN

A prognostic three-dimensional mesoscale model has been developed andused in one- and two-dimensional modes to evaluate ten local turbulenceclosure schemes. The schemes ranged from first-order to the two-equationprognostic schemes. Predictions by the models were compared for aone-dimensional convective boundary layer using mixed layer scaling andmeasurements to interpret the results. Two-dimensional simulations were alsoperformed for a sea-breeze flow and for flow over a hill. The results showedthat for all of the models considered, minor differences were produced in themean meteorological fields and in the vertical scalar fluxes, but majordifferences were apparent in the velocity variances and dissipation rate.Predicted tracer concentrations were very sensitive to the turbulence modelformulation for dispersion from a point source in the convective boundarylayer, particularly for the prediction of maximum concentrations. Predictedtracer concentrations from a surface volume source for the two-dimensionalsimulations were similar for all models, although the degree of mixing in themorning growth period produced some differences. Generally, good results forthe mean meteorological fields can be obtained with first-order schemes, evenif they underpredict the magnitude of turbulence in the convective boundarylayer, and reasonable tracer concentrations can also be obtained with thesemodels provided near-source effects are not important. The two-equationprognostic models performed best for the prediction of turbulence in theconvective boundary layer.     

Turbulent fluxes over inhomogeneous landscape

Mesoscale surface turbulent fluxes over a complex terrain surrounded by oceans have been investigated using a 3-D numerical mesoscale model, under conditions with and without synoptic flows. The study indicated that under synoptically calm condition, the allocation and intensity of mesoscale surface turbulent fluxes (MSTFs) were greatly impacted by the thermally forced mesoscale circulation (TFMC) over mesoscale heterogeneous landscape. The max-imum values of sensible (Hs) and latent (LE) heat fluxes were located over the convergent zones and considerably im-pacted by the soil wetness (M), but did not depend strongly on the atmospheric background thermal stability (β0). The simulated results suggested that the sensible heat flux was closely proportional to the square of wind speed in the surface layer. By the action of synoptic flow, the allocation of LE was shifted to downwind, its intensity increased.     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.     

洋岛,海山碳酸盐岩的沉积特征及其古地理意义

高出水面的洋岛和潜伏水下的海山普遍存在于现代地球表面的各大洋中，地质历史中存在的古洋岛和古海山也逐渐为人们所认识。笔者从地形特征，沉积学特征，成岩作用和生物学特征几个方面对洋岛，海山进行了分析，洋岛，海山通常具有洋岛型火山岩基底和碳酸盐盖层的双层式地层结构，具有低分异度，探讨了古洋岛，古海山的鉴别对于再造古海洋，古地理格局的现实意义。     

Geochemistry of the subduction-related magmatic rocks in the Dahong Mountains, northern Hubei Province——Constraint on the existence and subduction of the eastern Mianle oceanic basin

Being a composite collisional orogen between North China and South China blocks, the Qinling orogenic belt is the key to understand the composite combination, prolonged evolutionary history and their continental dynamics. The main suture between north and south Qinling, called Shangdan suture zone (SDSZ), had been studied in detail for about twenty years. Recently, another suture zone, called Mianl黣 suture zone (MLSZ), has been identified in the Qinling Mountains. It is characterized b…