Exploring some relationships between biological soil crusts, soil aggregation and wind erosion

A portable wind tunnel was used to test the contribution of biological and physical elements to overall soil aggregation on a soil dominated by biological soil crusts in south-eastern Australia. After moderate disturbance and simulated wind erosion, 90% of surface aggregates on the loamy soil and 76% on the sandy soil were dominated by biological elements (cryptogams). Lower levels of biological bonding were observed on the severely disturbed treatment. Linear regression indicated a significant positive relationship (r²=0·72) between biological soil crust cover and dry aggregation levels greater than 0·85mm. To maintain sediment transport below an erosion control target of 5gm⁻¹s⁻¹ for a 65kmh⁻¹ wind at 10m height, a crust cover of approximately 20% is required. When a multiple regression model which sequentially fitted biological crust cover and dry aggregation greater than 0·85mm was applied to the data, dry aggregation accounted for more of the variation in sediment transport rate than biological crust cover. These data were used to develop a conceptual model which integrates crust cover and dry aggregation, and provides a useful framework within which to predict the likely impacts of changes in soil crust cover and aggregation.     

热害矿井巷道温度场分布规律研究

为解决深部开采带来的热害问题，基于地质学和热力学理论，建立了热害矿井巷道温度场的数学模型，研究了巷道内部温度场随埋深和通风热速的变化规律。计算结果表明，巷道温度场对埋深的敏感度要高于风速、温度随埋深的增加而呈阶段性递增。控制入口温度是解决矿井热害的关键。以上结论为矿井热害的综合治理提供了重要依据。     

探地雷达检测中如何计算速度

雷达波的传播速度随介质而变,这给准确定位探测目标带来了一些困难,因为目标深度取决于速度与讯号反射时间的乘积.但另一方面,利用速度变化与介质的关系,反过来可以推断介质的物质架构.作者结合实用例举了7种求速度的方法,以供使用探地雷达的同行们选用.     

地震周期的存在及形成机制讨论

根据1900～2000年中国大陆、台湾及全球地层记录及前人的研究，论证了地层周期存在的可能性及形成机制。作者认为，是太阳活动、月球运动轨道及各行星运动轨道的周期性变化，通过磁力及万有引力改变地球内部物质的分布，从而引起地球自转速度的周期性变化，最终致使地展出现周期性的活跃期及平静期。     

Recent ventifact development on the central Oregon coast,western USA

The unusual location of ventifacts, on a boulder‐built jetty at the mouth of the Siuslaw River, Oregon coast, western USA, allows ventifact age and wind abrasion rates to be estimated with some precision. The jetty was built mainly between 1892–1901 and extended throughout the twentieth century. Consideration of historical shoreline position and the history of jetty construction and repair suggests the ventifacts have formed since about 1930. Morphologically the ventifacts are aligned south‐to‐north reflecting winter winds and sediment transport from the adjacent beach. Wind‐parallel grooves and ridges with sharp, sinuous crests are developed on inclined boulder surfaces on top of the jetty and reflect suspended sand transport in wind vortices. Deeply pitted surfaces on steep boulder surfaces nearest the beach reflect impact by saltating sand grains. Based on present wind regimes (1992–2000) from three regional weather stations, southerly winds above the sand transport threshold occur for 21·9–29·6 per cent of the time. Based on estimated depth of loss from boulder surfaces, wind abrasion rates are calculated to be on the order of 0·24–1·63 mm a^?1. This is the first well‐constrained field estimate of ventifact age and ventifaction rate from a modern coastal environment. Copyright © 2003 John Wiley & Sons, Ltd.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

Boreal temperature variability inferred from maximum latewood density and tree-ring width data, Wrangell Mountain region, Alaska

Variations in both width and density of annual rings from a network of tree chronologies were used to develop high-resolution proxies to extend the climate record in the Wrangell Mountain region of Alaska. We developed a warm-season (July–September) temperature reconstruction that spans A.D. 1593–1992 based on the first eigenvector from principal component analysis of six maximum latewood density (MXD) chronologies. The climate/tree-growth model accounts for 51% of the temperature variance from 1958 to 1992 and shows cold in the late 1600s–early 1700s followed by a warmer period, cooling in the late 1700s–early 1800s, and warming in the 20th century. The 20th century is the warmest of the past four centuries. Several severely cold warm-seasons coincide with major volcanic eruptions. The first eigenvector from a ring-width (RW) network, based on nine chronologies from the Wrangell Mountain region (A.D. 1550–1970), is correlated positively with both reconstructed and recorded Northern Hemisphere temperatures. RW shows a temporal history similar to that of MXD by increased growth (warmer) and decreased growth (cooler) intervals and trends. After around 1970 the RW series show a decrease in growth, while station data show continued warming, which may be related to increasing moisture stress or other factors. Both the temperature history based on MXD and the growth trends from the RW series are consistent with well-dated glacier fluctuations in the Wrangell Mountains and some of the temperature variations also correspond to variations in solar activity.     

天津气象塔风温梯度观测资料的统计特征

利用天津气象塔风温梯度观测资料对其统计特征及平均风温廓线的日变化规律进行了分析，特别是分析了稳定层结的风温廓线特征，还给出了几种典型天气的低层大气结构的个例分析。     

一次梅雨锋降水系统三维风场双、三雷达对比研究

2002年，“我国重大气候和天气灾害的形成机理与预测理论研究”项目首次启用三多普勒天气雷达组网对暴雨系统进行同步观测，作者使用MUSCAT技术对6月24日梅雨锋雨带上的一个中β系统进行了双、三多普勒雷达三维风场对比分析，表明大气中低层辐合线是此次暴雨系统的一个重要特征。     

矩形高层建筑扭转动力风荷载解析模型

本文通过研究不同长宽比、高宽比的矩形棱柱体在边界层风洞中典型攻角下的扭矩，提出了矩形高层建筑扭矩功率谱密度、均方根扭矩系数和Strouhal数的经验公式，并对相干函数作了一定的探讨，建立了完整的扭转动力风荷载解析模型。该模型和试验结果吻合较好，证明它是合理有效的，可在此基础上建立高层建筑扭转动力响应频域计算方法。