Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

关于求解碾磨机运动问题的相关讨论

针对关于求解碾磨机上一点运动的速度及加速度的问题展开讨论,从运动的不同角度考虑,给出了n种不同的解法。并将此问题拓展到一般情况下进行讨论,得出正确结论。并就一些相关问题进行了分析和解释。     

WAFS产品中GRIB资料中国区产品评估

为了给使用WAFS产品的用户提供量化参考依据，选取WAFS产品中常用区域和层次的GRIB数据，利用由国家气象中心提供的风、温客观分析网格点资料，与WAFS中同时刻的预报场产品（风、温网格点资料），用均方根误差进行数字化形式分析比较。结果表明：WAFS提供的风、温预报，通常是短时效的风、温预报比长时效的风、温预报更接近客观分析场；低层的预报比高层的预报更接近客观分析场；风的预报以v矢量的预报优于u矢量的预报；风的误差主要来源于u矢量的误差。     

冬季浙闽沿岸水分布的短期变动与风的关系初探

利用1999年7月至2003年5月期间的遥感数据,包括AVHRR海表层温度、QuikSCAT风场和风应力数据,在分析4年内月平均遥感温度场和风场特征与历年现场观测所获得的认识一致的基础上,选取2002年002-008天这一连续晴空的时段,尝试建立简单的沿岸冷水影响面积表征方法,初步探讨了冬季台湾海峡浙闽沿岸水分布的短期变动与风应力之间的关系。结果表明,风是决定冬季台湾海峡海表层温度逐日变动的关键因素,日平均SST与风应力的相关系数R2达到0·90。采用温度法(SST≤17℃)和温度空间距平法(≤-1℃)表征的浙闽沿岸水影响面积的变化趋势基本一致,而且影响面积的逐日变动与风应力显著相关,二者的相关系数R2分别达到0·90和0·91。     

Wind and Wave Data Analysis for the Aegean Sea - Preliminary Results

In this paper, a statistical analysis on wind and wave buoy measurements and wind and wave model forecasts obtained during a two-year period (1999-2001) is presented with reference to four characteristic near-shore sites of the Aegean Sea. The measurements are a main product of the "POSEIDON" system aiming at the monitoring and forecasting of the state of the Greek seas, operated by the National Centre for Marine Research (NCMR). Although the two-year period is rather short for a thorough analysis of the local wind and wave climate, yet the obtained results, presented herein for the first time, reveal some interesting features of the corresponding wave and wind characteristics. Comparisons between the measurements and the forecast results are also performed at the locations under consideration. It is found that (i) wind speeds obtained from the POSEIDON weather forecasting system are, in general, in agreement with the measurements, except for high wind speeds which are systematically underestimated, (ii) the WAM model can successfully follow the monthly and over year trend of the evolution of wind and wave characteristics, but face significant problems for efficient sea-state forecasting. Finally, the overall pattern of the wind/wave climate for the entire Aegean Sea as obtained from the models is presented by means of the spatial distribution of the mean annual wind and sea-state intensity.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

交流变频调速CD-2B型岩心钻机的研制

介绍了交流变频调速CD－2B型岩心钻机研制情况，技术参数，主要特点及型式检验，生产试验等情况。     

南向行星际磁场事件与磁暴关系的研究

利用172-182年IMP-8飞船的太阳风观测资料和相应地磁活动性指数Dst和AE,研究了43个南向行星际磁场事件期间太阳风和磁层的耦合问题. 与这43个事件对应的地磁暴是中等的和强的磁暴(Dst＜-50nT). 结果表明:(1) 在43个事件中有11个(约占25.6髎)紧随激波之后,18个处于激波下游流场中(占42髎),其余14个(占33髎)和激波没有关连. 绝大多数事件都伴有太阳风动压和总磁场强度的增加;(2) 当行星际晨昏向电场强度EI＞-4mV/m时,只引起磁亚暴,对Dst指数没有明显影响. 仅当EI＜-5mV/m时,磁亚暴和磁暴才会同时出现;(3) 太阳风动压的增加会增强能量向环电流的输入,但不是密度和速度单独起作用,而是以PK=ρV2的组合形式影响能量的输入;(4) 虽然行星际磁场(IMF)南向分量BZ对太阳风和磁层的耦合起着关键作用,但IMF的BX和BY分量相对于BZ的大小对太阳风向磁层的能量传输也有一定影响. 当BX、BY相对BZ较大时能量耦合加强.     

山东海阳断裂东石兰沟段晚更新世以来地表断错特征与最大潜在地震估计

海阳断裂是胶东半岛NE向牟平 -即墨断裂带东部一条规模较大的断裂 ,尽管晚更新世以来该断裂的地表断错活动总体上已基本停息 ,但东石兰沟段在晚更新世晚期以来仍有断错地表的活动。最后一次断错地表的活动发生在距今 3 7～ 1 2万年 ,但接近 1 2万年。地表破裂长度约6 5km ,活动段长度 8km。地表断错以走滑活动为主 ,可见最大倾滑位移 0 2m ;根据断层擦痕侧伏角推测最大水平位移 1 13m。最后一次断错地表的活动若以距今 1 2万年计算 ,则最大平均倾滑速率为 0 0 17mm/a ;最大平均右旋走滑速率为 0 0 94mm/a。野外观测到该活动段的断错活动表现为突发断错 ,根据地震地表破裂参数、活动段长度与地震的关系 ,估计其最大潜在地震为 6 级