海岸工程中海浪数值模拟和环境参数选取的进展

主要介绍了我国近的来在海岸工程设计，建设中有关海浪数值模拟及环境参数选取方面的研究进展。     

东海温度锋的分布特征及其季节变异

根据１９３４－１９８８年东海水文观测资料，重点分析东海温度锋的分布特征及其季节变异，并结合近期中日黑潮合作调查研究成果，初步探讨温度锋季节变异和水团演变的关系，所得主要结论是：（１）东海不仅常年存在浙闽沿岸锋，东海北部陆架锋和黑潮锋，而且、春、夏两季，在东海南部还出现一条东海中部出架锋。（２）江海温度锋季节变化的特点是：冬季，锋的宽度和强度皆是表层最强，夏季，表层温度锋仅出现在浙江近岸小范围海域。     

波浪作用下海床的有效应力分析

波浪作用下海床的稳定性分析是海洋工程地质评价的重要内容。海床的稳定性可通过计算分析其随时间变化的有效应力场来评估。本文建议了一个周期荷载作用下土体的本构模型 ,并用于计算波浪作用下海床的应力与变形。采用Biot固结理论和有限单元法 ,分析了海床的动态应力场与孔隙水压力场。波浪作用下两种渗透系数时有效应力的动态变化过程结果对比 ,反映了渗透消散作用对海床有效应力变化的影响     

Numerical modelling of deformation of multi-directional random waves over a varying topography

Two numerical formulations of the breaking phenomenon were implemented in a numerical model for random wave propagation based on the elliptic formulation of the mild-slope equation. The randomness of the wave field was simulated based on a spectral component method, in which the 3-D spectrum is discretised in components of equal energy. One of the breaking process formulations is based on the concept of breaking each independent spectral component. The other is based on the distribution of the local amount of energy dissipated through the independent spectral components. The model based on the concept of breaking each independent spectral component produces the best estimates of the wave field, when the numerical results are compared with laboratory data.     

The Huelva (Spain) Tsunami-Ready Station and Its Interaction with Storm Emma (March 2018)

Abstract

The sea level station operating since 1996 at Mazagón (Huelva, Spain) has been progressively upgraded to fit tsunami warning requirements, due to its location in one of the main regions at risk. Its radar water level sensor was complemented in 2017, with the addition of a pressure sensor. The performance of both sea level sensors and their response to sea level oscillations, at different frequencies, is assessed. Particular emphasis is put on the effect of extreme events, such as Storm Emma, when alternative methods to obtain 1-min data are tested, in contrast to the one based on arithmetic means. The overall differences are small, for the whole period of study (centered-root-mean-square-error below 1?cm, for 5-min, and hourly data; similar tidal parameters and sea level oscillations with periods between 30?s and 5?min). However, during Storm Emma, the pressure sensor presents sensibly lower readings than the radar, with the centered-root-mean-square-error rising to 80?mm on the March 2^nd 2018. A new method to compute 1-min data, based on medians, reduced this value to 10?mm for the same day.     

Strength Analysis of Turret Mooring Productive/Storage Tanker

The longitudinal strength of turret mooring productive/storage tanker is studied.A numeri-cal example has been implemented according to the method presented in this paper to give practical il-lustration.From the results of the numerical example,it is concluded that the turret hole located near theforward of the amidships has small effect on the longitudinal strength of the ship hull.As for design ex-treme value of wave bending moment of storage tanker,statistic method is a more reasonablemethodology,especially with the consideration of the servere environmental conditions.The primary esti-mation of design section modulus of turret storage tanker can be determined by this design bending mo-ment.     

冲绳海槽至马里亚纳海沟重力异常和地壳结构的初步研究

根据我们实测的水深、重力连续剖面资料,计算了自东海至北斐济盆地的地壳厚度。本文旨在对冲绳海槽至马里亚纳海沟的重力异常和地壳结构进行初步的研究。该地段位于太平洋板块俯冲带以西,构造活动十分复杂、剧烈,并含有多种类型的地壳结构。     

Validation of Jason and Envisat Altimeter Dual Frequency Rain Flags

New rain flags based on the dual frequency capabilities of the new Jason Poseidon-2 and Envisat RA2 altimeters have been tested, developed and adopted for the operational processing of the altimeter data. Their validation conducted during the calibration/validation phases of the satellites is presented here. The Jason flag is validated by comparison with the TOPEX one, using the Tandem mission. The results show a very good agreement between the two sensors and the two rain flags The Envisat flag is validated by comparison with both Jason and TOPEX using global and collocated data sets. The results show similar performances for the three sensors. The f relations estimated during the calibration-validation period and presented here have been given to the altimeter ground processing facilities for operational use.