上海软土的初始应力状态的影响研究

在K_0固结不排水三轴试验和各向等压固结不排水三轴试验的基础上,探讨初始应力状态对上海软土的强度和变形的影响规律,从而得出一些有益的结论,可供进一步的研究参考。     

Sedimentary facies of Maastrichtian to Danian deposits in Amur River area, Russian Far East

Sedimentary facies of the Tsagayan Formation is distributed in the eastern Zeya-Bureya Basin has been analyzed. The formation is of the Maastrichtian to Danian in age and characterized by the cyclicity of the fining-upwards successions. Analysis of environmental changes during the K/T boundary is the focus of this study. Five facies have been identified: Facies A, thick and laterally extensive coarse-grained to medium-gained sandstone units, interpreted as channelfill deposits; Facies B, parallel-laminated to massive mudstone units interpreted as interchannel lakes and flood plain deposits; Facies C, sheet-like medium-grained to fine-grained sandstones interpreted as crevasse splay deposits; Facies D, coal to coaly mudstone beds interpreted as deposits of peatlands; Facies E, very poorly sorted sandy mudstone beds interpreted as debris flow deposits. Fluvial environments with the low-relief fiat topography was inferred. A channel transported large volumes of clasts, and a flood basin with interchannel lakes and peatlands was deciphered. Any distinct change of sedimentary environments has not been identified throughout the Tsagayan Formation (including the K/T boundary). However, two beds of debris flow deposits were identified. The one occurs at the uppermost part of the lower Tsagayan Subformation and contains dinosaur fossils. The other is intercalated in the upper Tsagayan Subformation.     

P–T and structural evolution during exhumation of high-T, medium-P basement rocks in the Barberton Mountain Land, South Africa

The P–T evolution of amphibolite facies gneisses and associated supracrustal rocks exposed along the northern margin of the Paleo to MesoArchean Barberton greenstone belt, South Africa, has been reconstructed via detailed structural analysis combined with calculated K(Mn)FMASH pseudosections of aluminous felsic schists. The granitoid‐greenstone contact is characterized by a contact‐parallel high‐strain zone that separates the generally low‐grade, greenschist facies greenstone belt from mid‐crustal basement gneisses. The supracrustal rocks in the hangingwall of this contact are metamorphosed to upper greenschist facies conditions. Supracrustal rocks and granitoid gneisses in the footwall of this contact are metamorphosed to sillimanite grade conditions (600–700 °C and 5 ± 1 kbar), corresponding to elevated geothermal gradients of ～30–40 °C km^?1. The most likely setting for these conditions was a mid‐ or lower crust that was invaded and advectively heated by syntectonic granitoids at c. 3230 Ma. Combined structural and petrological data indicate the burial of the rocks to mid‐crustal levels, followed by crustal exhumation related to the late‐ to post‐collisional extension of the granitoid‐greenstone terrane during one progressive deformation event. Exhumation and decompression commenced under amphibolite facies conditions, as indicated by the synkinematic growth of peak metamorphic minerals during extensional shearing. Derived P–T paths indicate near‐isothermal decompression to conditions of ～500–650 °C and 1–3 kbar, followed by near‐isobaric cooling to temperatures below ～500 °C. In metabasic rock types, this retrograde P–T evolution resulted in the formation of coronitic Ep‐Qtz and Act‐Qtz symplectites that are interpreted to have replaced peak metamorphic plagioclase and clinopyroxene. The last stages of exhumation are characterized by solid‐state doming of the footwall gneisses and strain localization in contact‐parallel greenschist‐facies mylonites that overprint the decompressed basement rocks.     

Mantle derived crystal-poor rhyolitic ignimbrites: Eruptive mechanism from geochemical and geochronological data of the Piedra Parada caldera,Southern Argentina

Trace elements, isotopic modeling and U-Th-Pb SHRIMP zircon age constraints are used to reconstruct the eruption history and magmatic processes of the Piedra Parada Caldera. In the early Eocene, the crystal-poor Barda Colorada ignimbrite(BCI), having 15% micro-porphyritic crystals with respect to magmatic components, erupted a volume estimated in more than 300 km~3. The Piedra Parada caldera is located in the Patagonian Andes foreland, at the southern end of the calderas field of the Pilcaniyeu Volcanic Belt(PVB). This belt is related to an extensional tectonic setting as a result of the collision of the Farallon-Aluk ridge with South America, which enabled the development of a transform ocean/continental plate margin followed by the detachment of the Aluk plate and the opening of a slab window. The BCI extra-caldera Plateau is a 100 m thick deposit, having a lower unit with high silica(Si O_2 76 wt.%),potassium poor rhyolitic composition(trondhjemitic like magma), and an upper unit with normal to high potassium rhyolitic composition(granitic like magma). A trace elements modeling of the BCI units shows that the BCI lower and upper units did not evolve from fractionation or immiscibility in the shallow magma reservoir. The BCI also have a primitive isotopic signature(initial87 Sr/86 Sr =0.7031-0.7049 and ε_(Nd)= +3.4 to +3.65). Thus, tectonic, compositional and isotopic constraints suggest the fast ascent of high silica magmas to a shallow reservoir, and point to an upper mantle origin for these rhyolitic magmas in a transitional(Orogenic-Anorogenic) tectono-magmatic setting. U-Th-Pb SHRIMP zircon crystallization ages of the Syn-caldera stage BCI units(56 -51.5 Ma) show a protracted life of 5 Ma for this caldera reservoir. The age of 52.9 ± 0.3 Ma is considered the best fit for the possible maximum age for the caldera collapse. The Late-caldera magmatism has trachyandesitic and rhyolitic compositions.The trace element modeling suggests that these rhyolites evolve from the trachyandesites and do not evolve from the BCI residual magma. The trachyandesites have U-Th-Pb SHRIMP zircon crystallization ages of 52 ± 1 Ma, suggesting that the caldera eruption was triggered by the arrival of the trachyandesitic magma.     

伊利石结晶度Kübler指数的校正与近变质带的确定

就像用"砝码"标定"称"来测量物质质量一样,伊利石结晶度的测量也需要这样的"砝码"标定它的测量工具——衍射仪,从而能够进行伊利石结晶度的测量和对比。这个砝码就是伊利石结晶度标样或称伊利石结晶度国际标样。第2届Kübler-Frey国际研讨会伊利石结晶度圆桌会议就伊利石结晶度标样和近变质带的确定的问题进行了深入的讨论。会议一致认为,用伊利石结晶度标样校正X射线衍射仪是极为重要和必要的,没有进行标样校正的伊利石结晶度数据将被拒绝发表,经过伊利石结晶度国际标样校正后的伊利石结晶度数据才可用于近变质带的划分和国际对比。本文就伊利石结晶度测量的有关衍射仪类型与差别,衍射仪系统,测量条件,样品的影响和国际标样对仪器的校正等问题进行了分析研究。结果表明不同型号仪器,同型号仪器不同测量条件与状态,样品的不同制备方法都将影响伊利石结晶度Kübler指数的测量。指出只有使用国际标样才可校正测量的伊利石结晶度Kübler指数,从而达到消除偏差准确划分近变质带的标准和进行国际对比的目的。     

构造叠加晕在广东河台金矿的应用

广东河台金矿是一个典型与韧性剪切带有关的金矿床,也是目前粤西、桂东南已发现的最大的金矿床。为了给深边部的找矿提供科学依据,本文统计了金与其它元素的相关系数,并研究了金元素与其它元素的空间分布关系。相关系数统计表明,Ag、Cu与金的相关系数分别为0.94、0.87,可作为本区的近矿晕指示元素;As、Sb、Ba在金高异常前缘50~300m出现高异常,可作为本区的前缘晕指示元素;Mn、Mo、V、Ti、W在金高异常后缘0~35m出现高异常,可作为本区的尾晕指示元素。由前缘晕的指示意义与本区矿体北东侧伏的规律,提出矿体可能的出现区域。钻探结果较好地验证了预测区的含矿性,指示了前缘晕元素可能对本区的找矿有较好的指示意义。     

粗粒土等压固结与K0固结三轴试验比较

对某堆石坝覆盖层砂卵砾石料进行了不同干密度试样中型三轴试验,试验包括常规各向等压固结的三轴排水剪试验（CID试验）和各向不等压（K0）固结的三轴排水剪试验（CK0D试验）,对试验结果进行对比分析,研究2种试验方法对试验结果的影响。结果表明,2种试验所得到的应力—应变关系曲线总体规律比较一致,大小略有差异,CK0D试验的剪胀性比CID试验明显;不同围压下,2种试验的偏应力峰值差异（相对峰值）平均幅值为3.9%;对应3种密度（2.17、2.22、2.40g/cm3）,CK0D试验各围压下的平均内摩擦角分别比CID试验的内摩擦角大0.88°、0.48°、0.43°;随着密度增大,2种试验的强度均显著增大,且强度指标随密度近似线性增大。列出并比较了2种试验的邓肯模型参数,两者没有显著的差异。