污水源热泵技术在城市住宅供暖中的应用研究

随着城市的发展和能源需求的增长,污水的热能回收利用越来越受到关注,开发污水源热泵技术对建筑节能降耗具有重要意义。本文就污水源热泵系统的工作原理、特点等方面进行了介绍,阐述了国内外污水源热泵技术的开发利用历程与工程现状,分析了城市污水热能资源潜力以及污水源热泵技术的发展前景,指出利用污水与环境的温差获取热能具有十分巨大的能量资源前景,适宜的热源距离是污水源热泵开发利用的先决条件,开发污水源热泵系统,可以充分利用城市污水处理厂的二级出水或城市污水作为水源,通过合理利用出水的流量和温差为城市住宅供暖。基于我国能源与环境的现状,污水源热泵系统具有良好的市场前景,是一种值得推广的能源开发利用方式。     

2008年汶川地震(Ms8.0)非对称同震破碎带的确定:来自WFSD-1随钻流体的证据

地震过程中相当可观的一部分能量消耗于裂隙的活化与形成,来自汶川地震断裂带科学钻探一号孔(WFSD-1)的随钻流体表明,地震新形成的裂隙对应有较强的流体异常,它们为流体的入侵提供了良好的通道。随钻流体呈非对称性分布于主滑移面的两侧,主要的流体异常带集中在主滑移带下方须家河组顶部120 m范围内,该带中气体的含量以及变动的频率明显高于上部相同的宽度范围以及下部沉积岩层,来自地球物理测井的资料同样显示这一带破碎严重并伴随有大量水的侵入,暗示汶川地震形成的裂隙具有非对称性分布的特征。这一特征可能同时受控于断裂上盘彭灌杂岩与下盘须家河组岩层的力学性质差异以及地震破裂过程中形成的非对称性应力分布。     

北方集中供热系统气象风险评估初探

供热管网爆裂、跑冒滴漏是北方集中供热城市面临的常见问题,供热管网出现大型故障往往是在室外寒冷的隆冬时节,如果间断或限额供热时间过长,将会造成严重的社会和经济影响。同时在极端低温情况下,可能会造成热源供应不足,出现限额供热现象,不能保证室内舒适度,影响人们的正常生活。本文提出了能源供应气象风险评估和热网维修寒冷风险评估方法,并进行了案例评估,以期为未来进行相关风险评估提供参考。     

Elements’ Geochemical Characteristics of PM10 and PM2.5 in Beijing During Winter and Spring

From 2012 to 2013, heavy haze frequently hit Beijing in spring and winter. The fine atmospheric particulates can be inhaled by people, and remain in the respiratory tract and lung for quite a long time. The heavy metal elements in the particles are harmful, and even carcinogenic to human bodies. Therefore, it is necessary to master the geochemical characteristics and the temporal and spatial distribution of the heavy metal elements in atmospheric particles. The atmospheric particulates (TSP/PM₁₀/PM_2.5) were collected by using TH1500C intelligent medium volume (80~120 L/min) air samplers in the five functional areas and suburbs of Beijing, respectively in January 2013 (heating period) and April 2013 (non-heating period). The five functional areas were: building materials factory area, residential area, education area, business area and recreation area, each functional area having three sampling sites, and five in suburbs. The sampling height was 1.5 m above the ground and the distance of the sampling sites to roads exceeded 50 m so as to avoid excessive impact of vehicle exhaust emissions. These samples were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), Inductively Coupled Plasma Optical Emission Spectrometer(ICP-OES)and Atomic Fluorescence Spectrometer (AFS), by which 21 elements including Al, Fe, Mn, As, Hg, Cd, Cr were tested. Based on the comparisons of the concentration and element content variation of atmospheric particulates of these functional areas in and after the heating period, the spatial distribution of atmospheric particulates and the influence of coal combustion on the concentration and composition of atmospheric particulates were revealed. The elements sources of atmospheric particulates were also discussed by computing the enrichment factor of the elements, providing a scientific basis for the air contaminant treatment in Beijing. The results showed that the total concentration of the 21 elements of PM₁₀ and PM_2.5 in the functional areas of Beijing in winter was higher than that in spring, the most marked among them being the business area. In winter, the concentration of pollution elements in the building materials factory area and the business area in Beijing was extremely high, and the residential area, education area, recreation area and suburbs where people live were much better, among which the education area was the best. The concentration change of particulates in suburbs was quite smaller in winter and spring than that of the urban area. It also showed that the concentrations of Cd, Cr, As and Hg in PM₁₀ increased by 233%,306%,298%,141%,respectively and the increase in PM_2.5 was 442%、309%、310%、256%, respectively. These abovementioned elements show a tendency to accumulate mainly in PM_2.5 whose concentrations in winter were significantly higher than those in spring. It indicates that coal heating during winter makes great contributions to the polluting elements in atmosphere and the main polluting particulates are Cd, As and Hg.     

华北地区煤的显微组分结焦性热台试验

为探讨煤的显微组分的结焦性，对不同变质程度煤的镜质组、壳质组和惰性组分别进行了显微镜热台加热试验．在加热过程中，活性组分经历了３个明显不同的变化阶段，即变形阶段、胶质体形成阶段以及固化阶段．随煤变质程度的增加，镜质组的初变温度和胶质体形成时的温度逐渐增大，而固结温度变化规律不明显；壳质组在低变质阶段因受热而挥发掉，但随煤级增高其变形程度减弱；半镜质组在受热过程中也有变形和少量胶质体形成，而惰性组只发生微弱变化．在低变质阶段，活性显微组分形成的焦炭显微结构以各向同性为主；随变质程度的增高，焦炭显微结构中各向异性成分比例增大     

白云母、高岭石矿物中羟基的o同位素分析方法研究

羟基矿物内部存在两种位于不同结构位置上的氧原子硅氧四面体氧和羟基氧,二者之间的Ｏ同位素分馏可能比任何共生矿物对都大,是一种潜在的单矿物同位素地质温度计。单矿物同位素地质温度计较矿物对同位素地质温度计有很多优点。准确测量矿物中羟基的Ｏ同位素组成是建立单矿物同位素地质温度计的关键。本文介绍了一种精确测量白云母、高岭石矿物中羟基的Ｏ同位素组成的新方法火焰加热真空脱水氟化法。δ１８ＯＯＨ的分析精度达到０３‰,羟基氧的提取率达到９９％～１００％。实验证明羟基矿物在高温真空脱水过程中不存在Ｏ同位素动力学分馏,羟基水     

微波照射下火成岩升温特性和升温预测模型研究

微波辅助破岩可有效降低刀具磨损,提高破岩效率,具有广阔的发展前景.文章选取了10种火成岩进行微波加热试验,发现岩石的升温速率主要与岩石所含矿物的种类、含量,及岩石中的Fe元素含量有关.岩石所含矿物越敏感、含量越多,岩石中的Fe元素含量越大时,其升温速率越高.整体而言,火成岩中基性岩的升温速率最高、中性岩次之、酸性岩最低...     

天然气水合物加热开采机理及数学模型

在目前已有的主要水合物开采方法研究的基础上,进一步研究了天然气水合物加热开采法的机理。研究认为,水合物是加热分解、热传导和含化学分解的液、气两相渗流流动,它们之间既相互独立,又相互联系。并将水合物区划分为分解区和未分解区,将分解区前缘作为可移动的分界面,分区建立了加热分解热传导数学模型及含分解化学反应的液、气两相渗流流...     

基于分布式光纤传感技术的流速测量方法研究

简要介绍了分布式光纤传感技术的流速测量方法的主要仪器设备。在研究加热光纤与流水之间传热过程的基础上,推导了流速与光纤稳定温升、加热功率等参数之间的基于分布式光纤传感技术的流速测量方法的理论方程。设计了模型试验,对不同流速与加热功率下,光纤温升情况进行了试验研究。在试验数据分析的基础上,研究了静水与流水中光纤温升情况,结果表明：所有温升曲线都可以分为上升和稳定两个阶段,流水中的光纤温升明显低于静水中的光纤温升,两者的差值随着功率及流速的不同而不同。加热功率越大,两者温差越大;流速越大,温差越大。研究了加热功率对静水中光纤温升的影响,通过分析发现：静水中的光纤稳定温升与加热功率之间存在着良好的线性关系。重点分析了在一定功率下,流速与光纤稳定温升之间的关系,结果表明光纤稳定温升与水流速度呈非直线的反比关系。最后,对该方法进行了讨论,提出了下一步研究建议。     

新疆富蕴可可托海—二台断裂带中假玄武玻璃及其围岩的年代学研究

发育在新疆富蕴可可托海—二台断裂带中的假玄武玻璃是古地震断裂快速滑移形成的构造岩。地质产状、显微构造研究表明,这些假玄武玻璃主要由发生重结晶的玻璃质熔融体形成。假玄武玻璃基质的全岩40Ar/39Ar阶段升温方法主阶段和KAr年龄分别为282.8±3.8 Ma和276.4±7.4 Ma。假玄武玻璃所在母岩（黑云母花岗岩和钾长花岗岩）的锆石U-Pb年龄分别为390.4±1.0 Ma和396.3±0.1 Ma,表明二台断裂带中的假玄武玻璃是在二叠世早期形成的,也说明二台断裂带古地震活动至少可以追溯到晚古生代（早二叠世早期）。尽管二台断裂带是现今仍然活动的地震构造带,但目前所见到的假玄武玻璃是早二叠世时期古地震活动的产物。1931年的富蕴80级地震仅仅是沿着二台断裂带发生的多次构造活动的一次活动,与假玄武玻璃之间没有成因上的联系。