Total evaporation estimation for accurate water accounting purposes: an appraisal of various available estimation methods

The estimation of total evaporation is fundamental for water accounting, considering its influence on water availability. Moreover, the current increase in water consumption (e.g. in sub-Saharan Africa and the world over), land cover/use changes, deteriorating water quality and the climate change projections in most regions of the world underscore the need to understand water loss. So far, different approaches have been developed and implemented in estimating the variations of total evaporation, with varying accuracies. The aim of this work was therefore, to provide a review of these different approaches for estimating total evaporation, as well as a detailed discussion of their strengths and weaknesses. Findings from this review have shown that total evaporation estimates derived, using ground-based meteorological and micro-meteorological methods are inadequate for representing its large-scale spatial variations. On the other hand, remote sensing technology, which acquires data at different resolutions (i.e. radiometric, spectral, spatial and temporal), provides timely, up-to-date and relatively accurate spatial estimates of total evaporation over large geographic coverage, for sustainable and effective water accounting, which is key for well-informed and improved management of water resources at both catchment and regional scales. In this regard, more details on the remote sensing-based methods of estimating total evaporation are provided, especially considering the robust technological advancements and its potential in characterizing earth features over time and space. This work has also managed to identify research gaps and challenges in the accurate estimation of total evaporation, using remote sensing, especially with the emergence of more advanced sensors and the characteristics of the landscape.     

Assessing the performance of a large-scale irrigation system by estimations of actual evapotranspiration obtained by Landsat satellite images resampled with cubic convolution

Remote sensing techniques allow monitoring the Earth surface and acquiring worthwhile information that can be used efficiently in agro-hydrological systems. Satellite images associated to computational models represent reliable resources to estimate actual evapotranspiration fluxes, ET_a, based on surface energy balance. The knowledge of ET_a and its spatial distribution is crucial for a broad range of applications at different scales, from fields to large irrigation districts. In single plots and/or in irrigation districts, linking water volumes delivered to the plots with the estimations of remote sensed ET_a can have a great potential to develop new cost-effective indicators of irrigation performance, as well as to increase water use efficiency. With the aim to assess the irrigation system performance and the opportunities to save irrigation water resources at the “SAT Llano Verde” district in Albacete, Castilla-La Mancha (Spain), the Surface Energy Balance Algorithm for Land (SEBAL) was applied on cloud-free Landsat 5 Thematic Mapper (TM) images, processed by cubic convolution resampling method, for three irrigation seasons (May to September 2006, 2007 and 2008). The model allowed quantifying instantaneous, daily, monthly and seasonal ET_a over the irrigation district. The comparison between monthly irrigation volumes distributed by each hydrant and the corresponding spatially averaged ET_a, obtained by assuming an overall efficiency of irrigation network equal to 85%, allowed the assessment of the irrigation system performance for the area served by each hydrant, as well as for the whole irrigation district. It was observed that in all the investigated years, irrigation volumes applied monthly by farmers resulted generally higher than the corresponding evapotranspiration fluxes retrieved by SEBAL, with the exception of May, in which abundant rainfall occurred. When considering the entire irrigation seasons, it was demonstrated that a considerable amount of water could have been saved in the district, respectively equal to 26.2, 28.0 and 16.4% of the total water consumption evaluated in the three years.     

数据备份服务器备份性能分析

针对数据备份服务器备份性能优化问题，分别对实时数据存储与历史数据备份之间的关系、数据备份服务器所备份的数据类型非唯一性、客户数量对备份服务器备份效率的影响三方面进行初步的测试与分析，提出了通过优化数据块的选取、优化数据采集方式、优化备份策略提高备份服务器备份效率的基本方法。     

ArcIMS的性能优化及高可用性配置研究

基于ArcIMS可以在Web上建立稳定的、高性能的GIS服务,着重阐述了如何最大程度地利用ArcIMS的技术优势,通过Web传送地图及其数据,如何配置ArcIMS系统以减少因为故障停机的概率,以及如何调整空间数据和地图服务来提高地图服务的性能。最后进行了网络评估和多任务机制分析,为不同的应用提供了不同的解决方案。     

Deducing the spatial variability of exchange within a longitudinal channel water balance

Developing an appropriate data collection scheme to infer stream–subsurface interactions is not trivial due to the spatial and temporal variability of exchange flowpaths. Within the context of a case study, this paper presents the results from a number of common data collection techniques ranging from point to reach scales used in combination to better understand the spatial complexity of subsurface exchanges, infer the hydrologic conditions where individual influences of hyporheic and groundwater exchange components on stream water can be characterized, and determine where gaps in information arise. We start with a tracer‐based, longitudinal channel water balance to quantify hydrologic gains and losses at a sub‐reach scale nested within two consecutive reaches. Next, we look at groundwater and stream water surface levels, shallow streambed vertical head gradients, streambed and aquifer hydraulic conductivities, water chemistry, and vertical flux rates estimated from streambed temperatures to provide more spatially explicit information. As a result, a clearer spatial understanding of gains and losses was provided, but some limitations in interpreting results were identified even when combining information collected over various scales. Due to spatial variability of exchanges and areas of mixing, each technique frequently captured a combination of groundwater and hyporheic exchange components. Ultimately, this study provides information regarding technique selection, emphasizes that care must be taken when interpreting results, and identifies the need to apply or develop more advanced methods for understanding subsurface exchanges. Copyright © 2013 John Wiley & Sons, Ltd.     

The groundwater recharge regime of some slightly metamorphosed neoproterozoic sedimentary rocks: an application of natural environmental tracers

Isotope data of precipitation and groundwater in parts of the Voltaian Basin in Northern Ghana were used to explain the groundwater recharge regime in the area. Groundwater recharge is an important parameter in the development of a decision support system for the management and efficient utilization of groundwater resources in the area. It is therefore important to establish the processes and sources of groundwater recharge. δ¹⁸O and δ²H data for local precipitation suggest enrichment relative to the Global Meteoric Water Line (GMWL) and indicate that precipitation takes place at a relative humidity less than 100%. The groundwater data plot on an evaporation line with a slope of 5, suggesting a high degree of evaporative enrichment of the precipitation in the process of vertical infiltration and percolation through the unsaturated zone into the saturated zone. This finding is consistent with the observation of high evapotranspiration rates in the area and ties in with the fact that significant clay fraction in the unsaturated zone limits vertical percolation and thus exposes the percolating rainwater to the effects of high temperatures and low humidities resulting in high evapotranspiration rates. Groundwater recharge estimates from the chloride mass balance, CMB, method suggest recharge in the range of 1.8–32% of the annual average precipitation in the form of rainfall. The highest rates are associated with areas where open wells encourage significant amount of groundwater recharge from precipitation in the area. In the northern parts of the study area, groundwater recharge is lower than 12%. The recharge so computed through the application of the CMB methodology takes on a spatial distribution akin to the converse of the spatial pattern of both δ¹⁸O and δ²H in the area. As such, the locations of the highest recharge are associated with the most depleted values of the two isotopes. This observation is consistent with the assertion that low vertical hydraulic conductivities slow down vertical percolation of precipitation down to the groundwater water. The percolating precipitation water thus gets enriched in the heavier isotopes through high evapotranspiration rates. At the same time, the amount of water that finally reaches the water table is considerably reduced. Copyright © 2013 John Wiley & Sons, Ltd.     

Exploring hydroclimatic change disparity via the Budyko framework

The Budyko framework characterizes landscape water cycles as a function of climate. We used this framework to identify regions with contrasting hydroclimatic change during the past 50 years in Sweden. This analysis revealed three distinct regions: the mountains, the forests, and the areas with agriculture. Each region responded markedly different to recent climate and anthropogenic changes, and within each region, we identified the most sensitive subregions. These results highlight the need for regional differentiation in climate change adaptation strategies to protect vulnerable ecosystems and freshwater resources. Further, the Budyko curve moved systematically towards its water and energy limits, indicating augmentation of the water cycle driven by changing vegetation, climate and human interactions. This finding challenges the steady state assumption of the Budyko curve and therefore its ability to predict future water cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of anthropogenic seawater acidification on acid-base balance in the sea urchin Psammechinus miliaris

The purple-tipped sea urchin, Psammechinus miliaris, was exposed to artificially acidified seawater treatments (pH(w) 6.16, 6.63 or 7.44) over a period of 8 days. Urchin mortality of 100% was observed at pH(w) 6.16 after 7 days and coincided with a pronounced hypercapnia in the coelomic fluid producing an irrecoverable acidosis. Coelomic fluid acid-base measures showed that an accumulation of CO(2) and a significant reduction in pH occurred in all treatments compared with controls. Bicarbonate buffering was employed in each case, reducing the resultant acidosis, but compensation was incomplete even under moderate environmental hypercapnia. Significant test dissolution was inferred from observable increases in the Mg(2+) concentration of the coelomic fluid under all pH treatments. We show that a chronic reduction of surface water pH to below 7.5 would be severely detrimental to the acid-base balance of this predominantly intertidal species; despite its ability to tolerate fluctuations in pCO(2) and pH in the rock pool environment. The absence of respiratory pigment (or any substantial protein in the coelomic fluid), a poor capacity for ionic regulation and dependency on a magnesium calcite test, make echinoids particularly vulnerable to anthropogenic acidification. Geological sequestration leaks may result in dramatic localised pH reductions, e.g. pH 5.8. P. miliaris is intolerant of pH 6.16 seawater and significant mortality is seen at pH 6.63.     

Annual heat balance and equilibrium temperature of Lake Aegeri,Switzerland

The mean heat budget of Lake Aegeri, Switzerland, is 950 MJ·m^–2, comparable to that of neighbouring lakes. The annual variation in the net heat flux can be adequately described using a six-term heat balance equation based on 12 years of monthly mean meteorological and surface temperature data. Although the magnitude of the net heat flux is dominated by the radiative terms of the equation, the one-month backward shift of the net flux and total heat content extrema from the solstices and equinoxes respectively is due to the phase shift of the non-radiative with respect to the radiative terms. A linear approximation was used to express the net heat flux in terms of a heat exchange coefficient and an equilibrium temperature. The former varies from 17 to 28 W·m^–2·K^–1 in the course of a year; fluctuations in the latter are found to depend mainly on fluctuations in cloud cover and relative humidity, whilst the effect of fluctuations in air temperature and wind speed is slight.     

Meso-scale testing and development of test procedures to maintain mass balance

The Conrad Blucher Institute for Surveying and Science (Texas A&M University––Corpus Christi) has conducted numerous petroleum experiments at the Shoreline Environmental Research Facility (Corpus Christi, Texas, USA). The meso-scale facility has multiple wave tanks, permitting some control in experimental design of the investigations, but allowing for real-world conditions. This paper outlines the evolution of a materials balance approach in conducting petroleum experiments at the facility. The first attempt at a materials balance was during a 1998 study on the fate/effects of dispersant use on crude oil. Both water column and beach sediment samples were collected. For the materials balance, the defined environmental compartments for oil accumulation were sediments, water column, and the water surface, while the discharge from the tanks was presumed to be the primary sink. The “lessons learned” included a need to quantify oil adhesion to the tank surfaces. This was resolved by adhering strips of the polymer tank lining to the tank sides that could be later removed and extracted for oil. Also, a protocol was needed to quantify any floating oil on the water surface. A water surface (oil slick) quantification protocol was developed, involving the use of solid-phase extraction disks. This protocol was first tested during a shoreline cleaner experiment, and later refined in subsequent dispersant effectiveness studies. The effectiveness tests were designed to simulate shallow embayments which created the need for additional adjustments in the tanks. Since dispersant efficacy is largely affected by hydrodynamics, it was necessary to scale the hydrodynamic conditions of the tanks to those expected in our prototype system (Corpus Christi Bay, Texas). The use of a scaled model permits the experiment to be reproduced and/or evaluated under different conditions. To minimize wave reflection in the tank, a parabolic wave dissipater was built. In terms of materials balance, this design reduced available surface area as a sink for oil adsorption.