基于高分一号卫星的江西樟树市地质灾害评价

运用高分一号卫星进行江西樟树市地质灾害评价对于科学防治地质灾害,提高国产卫星应用水平具有重要意义。本文通过正射校正、影像融合、几何校正等步骤对高分一号影像进行预处理,然后对处理后的影像进行地质灾害解译,获取樟树市地质灾害分布情况。在进行地质灾害评价过程中采用小流域评价单元,选取灾害点密度、地表水文、构造断裂带、工程活动、岩土类型、地形坡度等6个评价因子,并运用层次分析法确定因子权重,通过加权平均法最终获得樟树市地质灾害易发性综合评价图,其精度为78%。结果表明樟树市易发生地质灾害的地区占全市总面积的34.68%,易发程度最高的地区主要分布在东南部,占全市总面积的7.82%。     

Monitoring canopy growth and grain yield of paddy rice in South Korea by using the GRAMI model and high spatial resolution imagery

Monitoring crop conditions and forecasting crop yields are both important for assessing crop production and for determining appropriate agricultural management practices; however, remote sensing is limited by the resolution, timing, and coverage of satellite images, and crop modeling is limited in its application at regional scales. To resolve these issues, the Gramineae (GRAMI)-rice model, which utilizes remote sensing data, was used in an effort to combine the complementary techniques of remote sensing and crop modeling. The model was then investigated for its capability to monitor canopy growth and estimate the grain yield of rice (Oryza sativa), at both the field and the regional scales, by using remote sensing images with high spatial resolution. The field scale investigation was performed using unmanned aerial vehicle (UAV) images, and the regional-scale investigation was performed using RapidEye satellite images. Simulated grain yields at the field scale were not significantly different (p = 0.45, p = 0.27, and p = 0.52) from the corresponding measured grain yields according to paired t-tests (α = 0.05). The model’s projections of grain yield at the regional scale represented the spatial grain yield variation of the corresponding field conditions to within ±1 standard deviation. Therefore, based on mapping the growth and grain yield of rice at both field and regional scales of interest within coverages of a UAV or the RapidEye satellite, our results demonstrate the applicability of the GRAMI-rice model to the monitoring and prediction of rice growth and grain yield at different spatial scales. In addition, the GRAMI-rice model is capable of reproducing seasonal variations in rice growth and grain yield at different spatial scales.     

A review on reflective remote sensing and data assimilation techniques for enhanced agroecosystem modeling

During the last 50 years, the management of agroecosystems has been undergoing major changes to meet the growing demand for food, timber, fibre and fuel. As a result of this intensified use, the ecological status of many agroecosystems has been severely deteriorated. Modeling the behavior of agroecosystems is, therefore, of great help since it allows the definition of management strategies that maximize (crop) production while minimizing the environmental impacts. Remote sensing can support such modeling by offering information on the spatial and temporal variation of important canopy state variables which would be very difficult to obtain otherwise.In this paper, we present an overview of different methods that can be used to derive biophysical and biochemical canopy state variables from optical remote sensing data in the VNIR-SWIR regions. The overview is based on an extensive literature review where both statistical–empirical and physically based methods are discussed. Subsequently, the prevailing techniques of assimilating remote sensing data into agroecosystem models are outlined. The increasing complexity of data assimilation methods and of models describing agroecosystem functioning has significantly increased computational demands. For this reason, we include a short section on the potential of parallel processing to deal with the complex and computationally intensive algorithms described in the preceding sections.The studied literature reveals that many valuable techniques have been developed both for the retrieval of canopy state variables from reflective remote sensing data as for assimilating the retrieved variables in agroecosystem models. However, for agroecosystem modeling and remote sensing data assimilation to be commonly employed on a global operational basis, emphasis will have to be put on bridging the mismatch between data availability and accuracy on one hand, and model and user requirements on the other. This could be achieved by integrating imagery with different spatial, temporal, spectral, and angular resolutions, and the fusion of optical data with data of different origin, such as LIDAR and radar/microwave.     

基于钻孔数据的三维地质建模与可视化研究

三维地质模型能够完整准确地表达复杂地质现象的边界条件及地质体内含的各种地质构造,直观地再现地质单元的空间展布及其相互关系,最大限度地提高地质分析的直观性和准确性,因此三维地质建模已引起地质、采矿、岩土工程等诸多领域的日益重视。笔者在综合考察多种建模方法的基础上,结合工程实践,提出了一种实用的工程地质三维建模实施方法。该方法以钻孔资料和地质剖面数据为三维地质建模的源数据,允许用户手工修正模型剖面地层分界线,从而实现对建模过程的干预和控制,克服了单纯依靠钻孔数据建模结果不精确且难以修正的问题。最后,通过一个研究实例展示了该方法的实际建模效果。     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

Troposphere gradients from the ECMWF in VLBI analysis

Modeling path delays in the neutral atmosphere for the analysis of Very Long Baseline Interferometry (VLBI) observations has been improved significantly in recent years by the use of elevation-dependent mapping functions based on data from numerical weather models. In this paper, we present a fast way of extracting both, hydrostatic and wet, linear horizontal gradients for the troposphere from data of the European Centre for Medium-range Weather Forecasts (ECMWF) model, as it is realized at the Vienna University of Technology on a routine basis for all stations of the International GNSS (Global Navigation Satellite Systems) Service (IGS) and International VLBI Service for Geodesy and Astrometry (IVS) stations. This approach only uses information about the refractivity gradients at the site vertical, but no information from the line-of-sight. VLBI analysis of the CONT02 and CONT05 campaigns, as well as all IVS-R1 and IVS-R4 sessions in the first half of 2006, shows that fixing these a priori gradients improves the repeatability for 74% (40 out of 54) of the VLBI baseline lengths compared to fixing zero or constant a priori gradients, and improves the repeatability for the majority of baselines compared to estimating 24-h offsets for the gradients. Only if 6-h offsets are estimated, the baseline length repeatabilities significantly improve, no matter which a priori gradients are used.     

Correcting superconducting gravity time-series using rainfall modelling at the Vienna and Membach stations and application to Earth tide analysis

We demonstrate the possibility to improve the signal-to-noise ratio of superconducting gravity time-series by correcting for local hydrological effects. Short-term atmospheric events associated with heavy rain induce step-like gravity signals that deteriorate the frequency spectrum estimates. Based on 4D modeling constrained by high temporal resolution rain gauge data, rainfall admittances for the Vienna and Membach superconducting gravity stations are calculated. This allows routine correction for Newtonian rain water effects, which reduces the standard deviation of residuals after tidal parameter adjustment by 10%. It also improves the correction of steps of instrumental origin when they coincide with step-like water mass signals.     

基于高分辨率遥感数据的城市居住单元交通环境质量评价——以厦门市为例

居住单元是与人们生活密切相关的社区范围,其交通环境的优劣是衡量居住单元环境好坏的重要标准之一。高分辨遥感影像 的高空间分辨率特点为我们提供了研究居住单元交通环境的可能性。本文从区域交通环境、路网可达性出发,对城市居住单元交通 环境质量的遥感评价方法进行了研究,根据高分辨率遥感影像的特点构建了居住单元交通环境的多级指标评价体系,并对厦门市的 50个居住单元进行了评价分析。实验表明,利用高分辨率影像进行城市交通环境质量评价是一种成本较低,简便可行的方法。     

城市道路照明管理规划系统中路灯自动配置算法和照明评价模型

随着城市现代化进程的加快,传统道路照明管理模式已远不能满足现代化的道路照明管理需求,出现了诸如随意建设、高耗能建设和光污染等问题。基于ArcGIS软件设计开发了郑州市道路照明管理规划系统,就该系统的路灯自动配置算法和道路照明评价模型等关键技术进行了研究与实现。路灯自动配置算法可以帮助解决路灯规划建设的难题,道路照明评价模型是照明设施建设是否合理的重要评价手段,这两项技术可有效协助解决道路照明领域存在的无序化、随意性和高耗能的建设做法,对于实现道路照明的科学规范管理和节约能源资源的目的具有一定的参考价值。     

GIS三维动态符号库的研究与开发

本文探讨了与GIS三维动态符号库相关的概念、分类及三维图形变换等基础理论;搭建了基于Java3D的GIS三维动态符号库开发平台;研究了3DMAX建模、三维动态符号库、建筑物内部场景展示等关键技术;开发了GIS三维动态符号库.