Influence of the Kunlun Mountain Ms8.1 Earthquake on Horizontal Crustal Deformation in the Sichuan and Yunnan Area

In order to track the space-time variation of regional strain field holistically(in a large scale) and to describe the regional movement field more objectively,the paper uses a nonlinear continuous strain model focused on extracting medium-low frequency strain information on the basis of a region with no rotation.According to the repeated measurements(1999～2001～2004) from GPS monitoring stations in the Sichuan and Yunnan area obtained by the Project of "China Crust Movement Measuring Network",and with the movement of 1999～2001(stage deformation background) as the basic reference,we separated the main influencing factors of the Kunlun Mountain M-S8.1 earthquake in 2001 from the data of 2001 and 2004,and the results indicate:(1) the Kunlun Mountain M-S8.1 earthquake has a discriminating effect on the Sichuan and Yunnan area,moreover,the deformation mode and background had not only certain similitude but also some diversity;(2) The movement field before the earthquake was very ordinal,while after the earthquake,order and disorder existed simultaneously in the displacement field;The displacement quantities of GPS monitoring stations were generally several millimeters;(3) The principal strain field before earthquake was basically tensile in an approximate EW direction and compressive in the SN direction,and tension was predominant.After the earthquake,the principal strain field in the Sichuan area was compressive in the EW direction and tensile in the SN direction,and the compression was predominant.In the Yunnan area,it was tensional in the NE direction and compressive in the NW direction,and tension was predominant;(4) The surficial strain before the earthquake was dominated by superficial expansion,the contractive area being located basically in the east boundary of Sichuan and Yunnan block and its neighborhood.After the earthquake,the Sichuan area was surface contractive(the further north,the greater it was),and south of it was an area of superficial expansion.Generally speaking,the Kunlun Mountain M-S8.1 earthquake played an active role in the accumulation of energy in the Sichuan and Yunnan area.Special attention shall be focused on the segment of Xichang-Dongchuan and its neighborhood.     

我国水平地带性土壤中有机质的空间变化特征

主要根据全国第二次土壤普查的成果，对我国水平地带性土壤中有机质的含量和胡敏酸与富里酸比值的空间变化特征进行了概括，进而探讨了在不同自然和人因素影响下，土壤有机质的累积状况与稳定性特征。     

ENSO循环的数值模拟──Ⅰ:水平结构演变

利用发展的包含海洋表面边界展和大气辐合反馈过程的热带太平洋海气耦合距平模式，对ＥＮＳＯ循环进行了模拟。通过３０ａ积分，用合模式所展示的热带太平洋海气耦合系统的ＥＮＳＯ循环的水平结构演变特征和观测事实甚为一致，成功地模拟出了ＥＮＳＯ循环的冷暖态的发生发展、衰亡及相互转换等各个位相的动力和热力场的水平结构及其对季节循环的依赖性特征。本文数值模拟结果表明，ＥＮＳＯ循环的主要动力学过程可由热带海气相互作用系统自身所确定。ＥＮＳＯ循环的正确模拟是揭示其形成机制的前提。     

多面函数拟合在地壳水平运动研究中的应用

多面函数拟合法已被应用于地壳垂直形变模型的分析中。本文利用这一曲面拟合理论研究了地壳水平形变模型，详细推导了相应的公式，为本方法的进一步研究与应用提供了几点启示     

西北地区近期地壳水平运动与构造变形特征

利用截止2004年的西北地区GPS和跨祁连-龙首山构造带的红外测距观测资料，借助最小二乘配置、弹性块体边界负位错模型及单一力源反演，研究昆仑山口西8．1级大震前后西北地区水平形变应变场的动态演化特征；尤其是大震3年后，即当前的构造形变与应力场态势；获取活动块体及其边界断裂上可能反映中强以上孕震背景的高应变能积累区、段，以及可能的潜在震源。结果表明：青藏块体北缘地区经8．1级大震后的短期松弛和调整，目前正在恢复印度板块北东向碰撞推挤背景场的主控作用。而北天山构造带中段及其与西段的交汇区、南天山构造带中西段及其与西昆仑构造带的交汇区、阿尔金断裂中段、祁连山构造带中东段及其与海原断裂的交汇区、西秦岭北缘断裂与庄浪河断裂东南延伸线的交汇区域等具有相对高应变能积累背景；临泽与海原这两个地区也反映一定程度的应变能积累状态。     

GPS技术在金川露天矿边坡变形监测中的应用

本文结合金川露天矿边坡变形GPS监测研究,主要论述监测基点的选择,基点WGS-84坐标的确定,变形监测网的布设,GPS数据采集、处理和质量,坐标转换的实施等,给出反演推出的若干四等三角点及其它控制点的变形数据,这些数据和造成变形的物理成因符合得很好,最后概括出GPS技术应用于变形观测的若干优点。     

Estimation of Sensible Heat Flux from Surface Temperature Wave and One-Time-of-Day Air Temperature Observation

By means of the algorithm presented here, the temporal course H(t) and the daily mean H¯ of the sensible heat flux H can be estimated from measurements of the thermodynamic surface temperature (as a function of time) and from a one-time-of-day air temperature observation. In addition to these temperatures, one needs estimates for daily mean wind speed, for the roughness lengths of momentum and heat transfer, and for the displacement height. First, a quite general solution of the equation for heat conductance (equation for the vertical profile of potential temperature (z,t)) in the dynamic sublayer will be presented. The undetermined parameters in this solution will be defined with the aid of the above mentioned measurements. The influence of horizontal advection will be taken into account. After that, the sensible heat flux can be evaluated from the temperature difference between surface and air with the well known resistance formulae. In this paper the algorithm is derived for areas with homogeneous surfaces, i.e., with uniform surface temperatures. Finally, the method will be verified by measurements taken during the field campaigns HIBE 89 (Hildesheimer Börde in Germany) and EFEDA 91 (Spain). The root mean square errors (RMSE) for the comparison between measurement and model with regard to the temperature difference of surface and air amount to one or two degrees Kelvin, and the error of H¯ reaches 10 to 25 per cent. The method can be used to determine the sensible heat flux from measurements of surface temperatures by satellites (e.g., METEOSAT), but can also be applied to ground based measurements. For instance, horizontal temperature advection can be estimated from measurements at a single location, especially if more than one near-surface air temperature is available. The procedure can be generalized for larger areas, which consist of various surface types with different surface temperatures. This generalization of the algorithm is in progress and will be addressed in a subsequent paper. It will allow us to improve the estimates for H(t) by means of temperature measurements from, e.g., NOAA/AVHRR or LANDSAT/TM, taking into account the heterogeneity of the area that is contained in one METEOSAT pixel.     

大气低频遥相关及其水平传播机制的解析研究

（１）利用大气对流层中部无辐散层的存在,垂直积分热力学方程,并对整个对流层的距平加热场作解析近似的描写,联立涡度方程,得到最非绝热地转的２５０ｈＰａ距平流函数方程。它的形式酷似正压涡度方程。（２）讨论了罗斯贝波列的谱平均相速和群速。证明了气候平均高度场的闭合中心,就是中高纬度大气低频振子。其两侧位相变化相反,它的能源主要来自ＣＩＳＫ凝结正反馈或海温的感热。（３）导出了低频相关射线公式,它表明低频射     

悬链线法在水平定向钻轨迹设计中的应用探究

铝孔轨迹设计是非开挖水平定向钻施工中一项重要内容。其最优化设计在国内已较成熟,但多数优化设计未从力学方面进行优化设计。针对这一情况,引入悬链线法来优化水平定向钻轨迹设计。通过悬链线法的计算可知,优化后的轨迹不仅有利于降低钻杆回转阻力和扭矩消耗,提高机械钻速,增长管道使用年限,同时与传统设计方法相比较,其计算出的轨迹长度也比传统圆弧轨迹长度略短,表明了悬链线法在水平定向钻轨迹设计上具有一定的优势。     

On the topography influence on subsidence due to horizontal underground mining using the influence function method

The classical influence function method is widely used in mining subsidence prediction, but its use is typically limited to predicting the subsidence associated with horizontal stratiform underground mining when the ground surface is flat. By investigating the topography influence on subsidence under simplified mining conditions, this study attempts to improve the original influence function method to take topographic variations into account. New asymmetrical influence functions are used to simulate element subsidence. Integrating this asymmetrical approach into the influence function method increases the realism of subsidence computation when compared to the numerical simulation results. The maximum subsidence value and influence angle got from field data are introduced into the improved method, then two field subsidence cases are studied and acceptable comparison results are achieved. This improved method should serve as the foundation for future work.