Contrasting metamorphic evolution of metasedimentary rocks from the Çine and Selimiye nappes in the Anatolide belt, western Turkey

Abstract P–T conditions, mineral isograds, the relation of the latter to foliation planes and kinematic indicators are used to elucidate the tectonic nature and evolution of a shear zone in an orogen exhumed from mid‐crustal depths in western Turkey. Furthermore, we discuss whether simple monometamorphic fabrics of rock units from different nappes result from one single orogeny or are related to different orogenies. Metasedimentary rocks from the Çine and Selimiye nappes at the southern rim of the Anatolide belt of western Turkey record different metamorphic evolutions. The Eocene Selimiye shear zone separates both nappes. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P–T conditions of about 7 kbar and >550 °C. Metasedimentary rocks from the overlying Selimiye nappe have maximum P–T conditions of 4 kbar and c. 525 °C near the base of the nappe. Kinematic indicators in both nappes are related to movement on the Selimiye shear zone and consistently show a top‐S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet‐chlorite zone at the base, the chloritoid‐biotite zone and the biotite‐chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional S_R foliation, parallel the Selimiye shear zone and indicate that the Selimiye shear zone formed during this prograde greenschist to lower amphibolite facies metamorphic event but remained active after the peak of metamorphism. ⁴⁰Ar/³⁹Ar mica ages and the tectonometamorphic relationship with the Eocene Cyclades–Menderes thrust, which occurs above the Selimiye nappe in the study area, suggests an Eocene age of metamorphism in the Selimiye nappe. Metasedimentary rocks of the Çine nappe 20–30 km north of the Selimiye shear zone record maximum P–T conditions of 8–11 kbar and 600–650 °C. An age of about 550 Ma is indicated for amphibolite facies metamorphism and associated top‐N shear in the orthogneiss of the Çine nappe. Our study shows that simple monophase tectonometamorphic fabrics do not always indicate a simple orogenic development of a nappe stack. Preservation in some areas and complete overprinting of those fabrics in other areas apparently occur very heterogeneously.     

新疆某水利枢纽工程软弱结构面抗剪强度参数的试验研究

某水利枢纽工程位于伊犁地区,影响工程的主要问题为坝基岩体软弱结构面和断层的抗滑稳定问题。根据工程实际条件和软弱夹层特性,采取现场断层软弱结构面试验和室内模拟试验相结合,获得软弱夹层的抗剪参数。实践证明,把两种方法结合起来的试验成果可靠,尤其对一些不具备进行现场大型岩体软弱夹层抗剪试验的工程,采用室内中型直剪仪进 行剪切试验具有实用意义。     

重塑非饱和粘土抗剪强度参数与饱和度的关系研究

土的饱和度是基于水分状态和密度状态的一个衍生变量。存在因应水分状态变化和因应密度状态变化的两类饱和度变化过程。根据23组不同水分状态和密度状态的UU三轴压缩试验结果,讨论了重塑非饱和粘性土抗剪强度参数与饱和度的关系。数据分析表明:粘聚力与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是准线性的。内摩擦角与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是弱非线性的。     

岩质边坡稳定性分析的探讨

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。     

Metamorphic and deformational imprint of Cambrian–Lower Ordovician rifting in the Ossa-Morena Zone (Iberian Massif, Spain)

The high-temperature metamorphism recorded in the Valuengo and Monesterio areas constitutes a rare occurrence in the Ossa-Morena Zone of Southwest Iberia, where low-grade metamorphism dominates. The metamorphism of the Valuengo area has been previously considered either Cadomian or Variscan in age, whereas that of Monesterio has been interpreted as a Cadomian imprint. However, these areas share important metamorphic and structural features that point towards a common tectonometamorphic evolution. The metamorphism of the Valuengo and Monesterio areas affects Late Proterozoic and Early Cambrian rocks, and is syn-kinematic with a top-to-the-north mylonitic foliation, which was subsequently deformed by early Variscan folds and thrusts. The U–Pb zircon age (480±7 Ma) we have obtained for an undeformed granite of the Valuengo area is consistent with our geological observations constraining the age of the metamorphism. We propose that this high-temperature metamorphic imprint along a NW–SE ductile extensional shear zone is related to the crustal extension that occurred in the Ossa-Morena Zone during the Cambro-Ordovician rifting. In the same way, the tectonothermal effect of the preorogenic rifting stage may have been wrongly attributed to orogenic processes in other regions as well as in this one.     

一次与西南低涡相联系的低空急流的数值研究

梅雨期西南低涡的东移发展与长江中下游降水的加强有密切关系,作者采用中尺度模式对一次西南低涡及其伴随低空急流的发展演变进行了数值模拟.模拟结果表明:在长江中下游大巴山地区低空急流先于西南涡东移发展;西南低涡及低空急流的生成发展在开始阶段与中层(400 hPa)的弱辐散密切相关;南风分量在西南低空急流的演变发展过程中起着更为主动的作用;南风分量增大中心位于南风分量中心的前方,促使南风分量中心东移;南风分量的动量方程收支分析表明水平平流项和产生项是促使南风分量变化的主要作用项,水平平流项和垂直平流项大部分相互抵消,科里奥利项的作用不可忽视,而其他项的值较小,在个别阶段和地区行星边界层项的作用在低层也较大.     

中尺度自忆模式在强降水预报中的应用

根据大气自忆性原理提出的回溯时间积分格式应用于中尺度格点模式MM5,构建了中尺度自忆模式SMM5并做了短期强降水预报的实验.结果表明,SMM5模式与MM5模式相比,由于使用了多个时刻的场资料,预报精度有了明显的提高, SMM5预报的最大雨区的中心位置与降水量也比MM5更接近实际观测场.     

黄河流域夏季分区面雨量预报研究

介绍黄河流域分区夏季面雨量预报的研究成果，精心挑选51个具有较好代表性的测站对黄河流域夏季降水的时空演变特征进行分析，使用K均值动态聚类对黄河流域的夏季降水进行了客观分区，并计算出各流域夏季面雨量。通过对黄河流域夏季雨量与500hPa环流，海温、OLR、中纬阻高，高原积雪，欧亚积雪等重要影响因子的关系分析，结合黄河流域夏季面雨量年降和年代际演变特征的分析，研究出黄河流域分区夏季面雨量预测的基本方法和模型，并通过客观化的数学方法建立黄河流域夏季面雨量预测系统，预测系统十年回报的结果显示出具有较的预测技巧。     

广西异常暴雨天气事件之异常指数初探

对广西异常暴雨天气事件之“异常指数”的设置进行了初步探讨，提出暴雨天气事件中过程日最大暴雨范围，过程持续时间，过程强降雨，特强降雨发生范围等四项异常分指数，然后统计同一过程分指数之和，得总指数，在此基础上分别选出了4－10月各月广西异常暴雨天气事件。