PLANT ADAPTATION,FIRM ENVIRONMENTS AND LOCATION ANALYSIS

Principal components analysis of fracture trace and sinkhole characteristics near 33 wells drawing water from the Ocala aquifer identified three hydrogeologically significant components. Multiple regression analysis using these components as independent variables showed that the flow of water to a well bore is influenced in order of importance by (1) proximity to a zone of high secondary permeability; (2) average aquifer transmissivity near the well; and (3) degree of cavity development in the closest zone of high secondary permeability.     

南极中山站附近麦氏贼鸥食性研究

对东南极中山站附近麦氏贼鸥巢区和无巢贼鸥群栖地的贼鸥回吐渣团及其他食物残物进行收集、分析和鉴定 ,结果表明 ,本区麦氏贼鸥主要捕食雪　 ,其残物在食物项中的平均出现率为 6 7～ 80 %;同时贼鸥从本区几个考察站觅取人类遗弃的垃圾食物作为其重要的食物补充 ,垃圾食物的平均出现率为 6 .8～ 1 1 .6 %。不同巢区贼鸥对雪　的捕杀量和垃圾的需求差异较大 ,其主要与营巢地域的雪　分布密度以及摄食区的占有与否有关。     

天然气溶解过程中组分分馏模型及其应用

天然气不同组分在水中溶解度的差异,导致溶解相与残留游离相天然气组分组成不同,即发生组分的溶解分馏效应。溶解分馏效应在天然气水溶运移、溶解散失等过程中均有发生。揭示天然气组分的溶解分馏规律、建立定量分馏模型,有助于天然气气源对比和成藏过程示踪。以Henry定律为依据,对不同组分溶解特征分析,提出了溶解度分数的概念,并建立了溶解分馏模型。根据该模型和各组分的溶解度分数和天然气溶解量,可计算各组分的溶解分馏量,恢复天然气初始组成特征。计算表明,威远震旦系气藏初期的天然气组成为:CH4为72.70%,C2H6为0.09%,CO2为22.41%,N2为4.07%,干燥系数(C1/C1-5)为99.876%。溶解作用使天然气中CO2含量显著降低,烃类气体含量增加,而天然气干燥系数降低。结果有助于天然气成因判识和气源对比等。     

Understanding carbonate factories through palaeoecological and sedimentological signals – Tribute to Luis Pomar

The carbonate factories, their controlling factors and their palaeoecological and sedimentological signals recorded in sedimentary successions are key elements for understanding the evolution of carbonate platform systems. Luis Pomar has dedicated most of his academic life to the study of carbonate rocks and carbonate factories. The idea for this special issue to celebrate Pomar’s career arose during a session at the 34^th International Association of Sedimentologists meeting held in Rome, entitled ‘Understanding carbonate factories through palaeoecological and geochemical signals’. The proposal encountered great response among participants, and additional contributions followed an email invitation to other specialists. This issue contains a variety of papers on carbonate sedimentology and carbonate factories. Here, an introduction that contextualizes the papers and key concepts discussed in this thematic issue is provided. It reviews Luis Pomar’s major achievements in carbonate sedimentology and discusses the evolution of the concept of the carbonate factory and the series of palaeoecological and sedimentological signals used to characterize the wide spectrum of carbonate depositional systems found in the natural world.     

Acceleration response modification factors for nonstructural components attached to inelastic moment‐resisting frame structures

A statistical analysis of the peak acceleration demands for nonstructural components (NSCs) supported on a variety of stiff and flexible inelastic regular moment‐resisting frame structures with periods from 0.3 to 3.0 s exposed to 40 far‐field ground motions is presented. Peak component acceleration (PCA) demands were quantified based on the floor response spectrum (FRS) method without considering dynamic interaction effects. This study evaluated the main factors that influence the amplification or decrease of FRS values caused by inelasticity in the primary structure in three distinct spectral regions namely long‐period, fundamental‐period, and short‐period region. The amplification or decrease of peak elastic acceleration demands depends on the location of the NSC in the supporting structure, periods of the component and building, damping ratio of the component, and level of inelasticity of the supporting structure. While FRS values at the initial modal periods of the supporting structure are reduced due to inelastic action in the primary structure, the region between the modal periods experiences an increase in PCA demands. A parameter denoted as acceleration response modification factor (R_acc) was proposed to quantify this reduction/increase in PCA demands. Copyright © 2007 John Wiley & Sons, Ltd.     

Comparison of LiDAR waveform processing methods for very shallow water bathymetry using Raman,near‐infrared and green signals

Airborne light detection and ranging (LiDAR) bathymetry appears to be a useful technology for bed topography mapping of non‐navigable areas, offering high data density and a high acquisition rate. However, few studies have focused on continental waters, in particular, on very shallow waters (<2 m) where it is difficult to extract the surface and bottom positions that are typically mixed in the green LiDAR signal. This paper proposes two new processing methods for depth extraction based on the use of different LiDAR signals [green, near‐infrared (NIR), Raman] of the SHOALS‐1000T sensor. They have been tested on a very shallow coastal area (Golfe du Morbihan, France) as an analogy to very shallow rivers. The first method is based on a combination of mathematical and heuristic methods using the green and the NIR LiDAR signals to cross validate the information delivered by each signal. The second method extracts water depths from the Raman signal using statistical methods such as principal components analysis (PCA) and classification and regression tree (CART) analysis. The obtained results are then compared to the reference depths, and the performances of the different methods, as well as their advantages/disadvantages are evaluated. The green/NIR method supplies 42% more points compared to the operator process, with an equivalent mean error (?4·2 cm verusu ?4·5 cm) and a smaller standard deviation (25·3 cm verusu 33·5 cm). The Raman processing method provides very scattered results (standard deviation of 40·3 cm) with the lowest mean error (?3·1 cm) and 40% more points. The minimum detectable depth is also improved by the two presented methods, being around 1 m for the green/NIR approach and 0·5 m for the statistical approach, compared to 1·5 m for the data processed by the operator. Despite its ability to measure other parameters like water temperature, the Raman method needed a large amount of reference data to provide reliable depth measurements, as opposed to the green/NIR method. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigating the vibration properties of integrated ceiling systems considering interactions with surrounding equipment

Studies on recent earthquakes highlighted that buildings with minimal structural damage still suffer from extensive damage and failure of nonstructural components. The dropping and damage of suspended ceiling systems, which typically consist of acceleration-sensitive nonstructural elements, resulted in lengthy functional disruptions and extended recovery time. This article experimentally and analytically examined the vibration properties of an integrated ceiling system considering the interactions with surrounding electrical equipment. The theoretical stiffness and corresponding frequency of electrical equipment were initially derived and then verified by subsequent vibration tests and numerical analyses. The seismic performance of the air conditioner (AC) was evaluated with different installment configurations based on design spectra and floor response spectra. Vibration tests of the suspended integrated ceiling system considering the interactions with surrounding equipment showed that the inclusion of peripheral constraints increased the first horizontal vibration frequency of the ceiling system by a factor of approximately 6. The natural frequencies of all components in the integrated ceiling system were almost identical, which was attributed to the coupled behavior between the ceiling panels and surrounding equipment, emphasizing the effect of interactions between adjacent components during dynamic analysis. Based on the above experimental investigation, an associated numerical model of the integrated ceiling system was created. Finally, corresponding parametric studies that included the interactions with surrounding equipment, reinforcing braces of ACs and strengthening members at the rise-up location between two elevations were performed.     

联系参数函数不独立扩建网极大验后估计的方差分量估计公式

扩建网极大验后估计模型蕴含联系参数X2和扩建网观测量L2两个方差分量。将联系参数分解成函数不独立部分和函数独立部分,根据限制条件求出函数不独立部分代入扩建网观测方程消去不独立部分联系参数,推导了联系参数函数不独立扩建网极大验后估计的Helmert型、Welsch型和Forstner型方差分量估计。     

磁异常探测中磁场矢量导数快速计算方法

目的 针对计算磁位高阶导数常用的频率域快速傅立叶变换方法在实际应用中存在边界效应的问题,提出了分别在x和y方向上移相π/2二维余弦变换定义及其时域微分定理,推导出了磁场矢量分量的导数计算公式,并将其应用于方向解析信号的磁异常边界识别方法。通过棱柱体源磁场理论数据对比分析,验证了基于余弦变换计算磁位高阶导数的方法在不需要扩边或滤波处理、未增加额外处理数据和算法复杂度的前提下,可避免或减小边界效应,算法稳定性更好,计算结果精度更高。