Shake table investigation on the seismic performance of hospital equipment supported on wheels/casters

This paper presents an experimental investigation on the seismic response of medical equipment supported on wheels and/or casters. Two pieces of equipment were tested: a large ultrasound machine and a cart carrying smaller medical equipment. In the first phase, the resistance of the wheels and casters of the equipment was characterized through a controlled‐displacement procedure on the shake table. In the second phase, an extensive shake table test program was carried out to investigate the seismic response of the equipment. The input signals for the shake table tests included floor motions of a four‐story steel braced‐frame hospital designed to satisfy seismic requirements of a site in the Los Angeles area. The results of 96 shake table tests reported in this study include the seismic performance of the equipment under both unlocked and locked conditions, located on various floor levels of the building. It was observed that engaging the casters' locking mechanism does not necessarily decrease the relative displacement. The displacement response was sensitive to the excitation intensity and the orientation of the equipment with respect to the input excitation. Based on the experimental observations, appropriate structural engineering demand parameters associated with the relative displacement and relative velocity demands of the equipment are proposed and used to develop conditional probability curves. Finally, in an effort to extend the results of this experimental study to similar equipment on wheels/casters, the performance of a simple numerical model in predicting the peak seismic demands is evaluated. Copyright © 2016 John Wiley & Sons, Ltd.     

保持主分量变换结果信息的量化方法

从主分量变换后图像信息保持的角度出发，充分分析了变换结果存储导致信息丢失的原因；同时以直接线性变换为基础，提出了另外两种新的对主分量变换结果进行量化的方法；并对这3种方法进行了充分的比较，文中最后以信息熵为指标评价了3种方法的优劣。     

卫星遥感结合地面观测估算非均匀地表区域能量通量

卫星遥感在研究非均匀陆面上地－气间能量和水循环过程时有其独到的作用。文中介绍了一种利用ＬＡＮＤＳＡＴＴＭ资料进行非均匀陆面上区域能量平衡研究的参数化方案。并以夏季和深秋两个景的ＴＭ资料为个例,结合“黑河实验”（ＨＥＩＦＥ）期间的地面观测资料分析了实验区非均匀陆面上地表特征参数及能量平衡各分量的区域分布及季节差异,同时将所得的结果与地面观测的“真值”作了比较,所得的这些结果是基本可信的。这种方法仍然处于发展的初始阶段,对此也进行了讨论。     

Identification of the anomaly component using BEMD combined with PCA from element concentrations in the Tengchong tin belt,SW China

Concentration of elements or element groups in a geological body is the result of multiple stages of rockforming and ore-forming geological processes.An ore-forming element group can be identified by PCA(principal component analysis)and be separated into two components using BEMD(bi-dimensional empirical mode decomposition):(1)a high background component which represents the ore-forming background developed in rocks through various geological processes favorable for mineralization(i.e.magmatism,sedimentation and/or metamorphism);(2)the anomaly component which reflects the oreforming anomaly that is overprinted on the high background component developed during mineralization.Anomaly components are used to identify ore-finding targets more effectively than ore-forming element groups.Three steps of data analytical procedures are described in this paper; firstly,the application of PCA to establish the ore-forming element group;secondly,using BEMD on the o re-forming element group to identify the anomaly components created by different types of mineralization processes; and finally,identifying ore-finding targets based on the anomaly components.This method is applied to the Tengchong tin-polymetallic belt to delineate ore-finding targets,where four targets for Sn(W)and three targets for Pb-Zn-Ag-Fe polymetallic mineralization are identified and defined as new areas for further prospecting.It is shown that BEMD combined with PCA can be applied not only in extracting the anomaly component for delineating the ore-finding target,but also in extracting the residual component for identifying its high background zone favorable for mineralization from its oreforming element group.     

Geochemical constraints on the contribution of Louisville seamount materials to magmagenesis in the Lau back-arc basin,SW Pacific

Seamounts are an integral part of element recycling in global subduction zones. The published trace element and Pb-Sr-Nd isotope data for basaltic lavas from three key segments (Central Lau Spreading Ridge (CLSR), Eastern Lau Spreading Ridge (ELSR), and Valu Fa Ridge (VFR)) of the Lau back-arc basin were compiled to evaluate the contribution of Louisville seamount materials to their magma genesis. Two geochemical transitions, separating three provinces with distinct geochemical characteristics independent of ridge segmentation, were identified based on abrupt geochemical shifts. The origin of the geochemical transitions was determined to be the result of drastic compositional changes of subduction components added into the mantle source, rather than the transition from Indian to Pacific mid-ocean ridge basalt (MORB) mantle, or due to variable mantle fertilities. The most likely explanation for the drastic shifts in subduction input is the superimposition of Louisville materials on ‘normal’ subduction components consisting predominantly of aqueous fluids liberated from the down-going altered oceanic crust and minor pelagic sediment melts. Quantitative estimation reveals that Louisville materials contributed 0–74% and 21–83% of the Th budget, respectively, to CLSR and VFR lavas, but had no definite contribution to the lavas from the ELSR, which lies farthest away from the subducted Louisville seamount chain (LSC). The spatial association of the subducted LSC with the Louisville-affected segments suggests that the Louisville signature is regionally but not locally available in the Tonga subduction zone. Besides, the preferential melting of subducted old Cretaceous LSC crust instead of the old normal Pacific oceanic crust at similar depths implies that elevated temperature across the subduction interface or seamount erosion and rupture were required to trigger melting. A wider implication of this study, thus, is that seamount subduction may promote efficiency of element recycling in subduction zones.     

南极普里兹湾及其邻近海域表层水镭同位素的分布及应用

中国第27次南极科学考察期间(2010年12月30日至2011年1月16日),对普里兹湾及其邻近海域表层海水进行了226Ra和228Ra的分析,结果表明:226Ra和228Ra比活度的变化范围分别为1.47—2.43Bq/m3和0.17—0.45Bq/m3,平均值分别为2.13Bq/m3和0.29Bq/m3,228Ra/226Ra)A.R.(228Ra与226Ra的活度比)的变化范围为0.08—0.20,平均值为0.14。根据盐度和226Ra的质量平衡方程,计算出研究海域表层水中冰融水、南极夏季表层水和普里兹湾中深层水的份额。研究海域表层水中温度、盐度、226Ra、228Ra、228Ra/226Ra)A.R.和冰融水份额的空间分布显示,在埃默里冰架前沿海域,西侧海域较东侧海域具有低温、高盐、高226Ra、低228Ra、低228Ra/226Ra)A.R.、低冰融水份额的特征,证实埃默里冰架下水体东进西出的运动规律。根据埃默里冰架前沿东、西侧水体228Ra/226Ra)A.R.的差异,估算出埃默里冰架下表层水体东进西出所经历的时间为1.85a。此外,在普里兹湾湾口中部海域(66.5—67.5°S,72°—74°E),观察到次表层水的上升通风作用,该区域较高的228Ra含量和228Ra/226Ra)A.R.证明这些表层水体并非来自湾外绕极深层水的上涌,而可能来自湾内埃默里冰架输出水体。     

太平洋侧花海葵的营养成分分析

本文测定了太平洋侧花海葵中的蛋白质、脂肪和无机元素等营养成分,分析了太平洋侧花海葵中构成蛋白质的17种常见氨基酸和主要脂肪酸含量。结果表明,太平洋侧花海葵是一种高蛋白、低脂肪的海产品;必需氨基酸和鲜味氨基酸的含量较高,但必需氨基酸之间的比值不太符合人体的氨基酸平衡,宜与其他食物搭配食用。各类脂肪酸中,油酸(18∶1)含量最高,其次为C22∶2。无机元素丰富,尤其是Zn,含量可达254.4 mg/kg。     

Are red tides affecting economically the commercialization of the Galician (NW Spain) mussel farming?

Harmful algal blooms (HABs), more specifically red tides, are among the most critical environmental factors affecting mussel cultivation in Galicia (NW Spain), and they often have been blamed for economic losses for producers. This statement is based on the correlation between days of closure of the production areas and unsold product. The present article shows that such a statement is not always correct, at least in the case of Galician mussel farming, because red tides only cause losses to producers under specific circumstances that arise from the impossibility of placing their product in the market. In addition, this article reveals the importance of finding organizational solutions within the framework of the production sector to counteract the impact of this type of phenomenon.     

Effect of irregular structural configuration on floor acceleration demand in hill‐side buildings

A suite of reinforced‐concrete frame buildings located on hill sides, with 2 different structural configurations, viz step‐back and split‐foundation, are analyzed to study their floor response. Both step‐back and split‐foundation structural configurations lead to torsional effects in the direction across the slope due to the presence of shorter columns on the uphill side. Peak floor acceleration and floor response spectra are obtained at each storey's center of rigidity and at both its stiff and flexible edges. As reported in previous studies as well, it is observed that the floor response spectra are better correlated with the ground response spectrum. Therefore, the floor spectral amplification functions are obtained as the ratio of spectral ordinates at different floor levels to the one at the ground level. Peaks are observed in the spectral amplification functions corresponding to the first 2 modes in the upper portion of the hill‐side buildings, whereas a single peak corresponding to a specific kth mode of vibration is observed on the floors below the uppermost foundation level. Based on the numerical study for the step‐back and split‐foundation hill‐side buildings, simple floor spectral amplification functions are proposed and validated. The proposed spectral amplification functions take into account both the buildings' plan and elevation irregularities and can be used for seismic design of acceleration‐sensitive nonstructural components, given that the supporting structure's dynamic characteristics, torsional rotation, ground‐motion response spectrum, and location of the nonstructural components within the supporting structure are known, because current code models are actually not applicable to hill‐side buildings.     

BAYES方差分量估计在虚拟权平差中的应用

本文把近似Bayes方基分量估计公式应用于矿区扩建网的虚拟权平差中，解决了具体计算中的一些实际问题，最后，通过一矿区扩建网平差实例验证了该方法的可行性．