Numerical modeling of 3-D terrain effect on MT field

Using the boundary element method, the numerical modeling problem of three-dimensional terrain effect on magnetotelluric (MT) field is solved. This modeling technique can be run on PC in the case of adopting special net division. The result of modeling test for 2-D terrain by this modeling technique is basically coincident with that by 2-D modeling technique, but there is a great difference between the results of 3-D and 2-D modeling for 3-D terrain. Project supported by the National Natural Science Foundation of China.     

电法勘探的发展和展望

电法勘探在经历了近一个世纪的发展后，其方法理论、仪器设备、野外数据采集、处理和解释等方面都经历了一系列重大变化．本文以方法理论的进展为主线，回顾、展望了目前电法勘探中几个重要而令人关注的研究焦点．这些问题的研究进展将会对21世纪的电法勘探产生深远的影响．     

Separate Analysis of Remote Sensing Information of Structures of Different Geological Periods and Quantitative Study of Corresponding Tectonic Stress Fields

The structural feature shown on a remote sensing image is a synthetic result ofcombination of the deformations produced during the entire geological history of an area.Therefore, the respective tectonic stress field of each of the different stages in the complexdeformation of an area can be reconstructed in three steps: (1) geological structures formed atdifferent times are distinguished in remote sensing image interpretation; (2) structuraldeformation fields at different stages are determined by analyzing relationships betweenmicrostructures (joints and fractures) and the related structures (folds and faults); and (3)tectonic stress fields at different stages are respectively recovered through a study of the featuresof structural deformation fields in different periods. Circular structures and related circlular and radial joints are correlated in space to con-cealed structural rises. The authors propose a new method for establishing a natural model ofthe concealed structural rises and calculating the tectonic stress field by using quantitative dataof the remote sensing information of circular structures and related linear structures.     

中国中西部地区地震的重新定位和三维地壳速度结构

采用中国中西部地区(21~36N， 98~112E)193个地震台在1992～1999年间记录到的9 988次地震的Pg和Sg震相走时的读数资料，用Roecker的SPHYPIT90程序，反演了该地区三维地壳P波速度结构，并用SPHREL3D90程序进行了地震的重新定位．反演结果揭示了中国中西部地区地震P波速度结构明显的横向不均匀性，这些不同深度上波速的横向变化多以该地区的活动断裂为分界线．可以看出活动断裂两侧存在明显的速度反差．通过重新定位，得到了6 459次地震的震源参数，这些精确定位的地震震中明显沿该区活动断裂呈现条带状分布，其范围和尺度清晰地表示了这一地区地震活动与活动断裂的紧密关系．其中，82％重新精确定位的事件的震源深度在20 km以内. 这一结果与笔者用双差地震定位法得到的重新定位的震源深度分布相一致．      

Kinetics of the Gas-Phase Reactions of OH Radicals, NO3 Radicals and O3 with Three C7-Carbonyls Formed From The Atmospheric Reactions of Myrcene, Ocimene and Terpinolene

Rate constants for the gas-phase reactions of OH radicals, NO₃ radicals and O₃ with the C₇-carbonyl compounds 4-methylenehex-5-enal [CH₂=CHC(=CH₂)CH₂CH₂CHO], (3Z)- and (3E)-4-methylhexa-3,5-dienal [CH₂=CHC(CH₃)=CHCH₂CHO] and 4-methylcyclohex-3-en-1-one, which are products of the atmospheric degradations of myrcene, Z- and E-ocimene and terpinolene, respectively, have been measured at 296 ± 2 K and atmospheric pressure of air using relative rate methods. The rate constants obtained (in cm³ molecule^–1 s^–1 units) were: for 4-methylenehex-5-enal, (1.55 ± 0.15) × 10^–10, (4.75 ± 0.35) × 10^–13 and (1.46 ± 0.12) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively; for (3Z)-4-methylhexa-3,5-dienal: (1.61 ± 0.35) × 10^–10, (2.17 ± 0.30) × 10^–12, and (4.13 ± 0.81) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively; for (3E)-4-methylhexa-3,5-dienal: (2.52 ± 0.65) × 10^–10, (1.75 ± 0.27) × 10^–12, and (5.36 ± 0.28) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively; and for 4-methylcyclohex-3-en-1-one: (1.10 ± 0.19) × 10^–10, (1.81 ± 0.35) × 10^–12, and (6.98 ± 0.40) × 10^–17 for the OH radical, NO₃ radical and O₃ reactions, respectively. These carbonyl compounds are all reactive in the troposphere, with daytime reaction with the OH radical and nighttime reaction with the NO₃ radical being predicted to dominate as loss processes and with estimated lifetimes of about an hour or less.     

工程岩体三维构模中钻孔数据处理方法

原始数据处理是工程岩体三维构模中存在的主要困难之一。从三维构模的角度,将工程岩体按几何特征抽象为4种结构单元类型。钻孔数据是描述工程岩体的重要原始数据,具有多尺度性。针对这个特点,提出钻孔数据纵向概化准则,解决工程岩体多尺度显示问题;根据地质学的地质数据解译方法,结合岩层层状分布的特点,提出层处理方法对钻孔数据进行概化处理,确定工程岩体所对应的结构单元类型,创建工程岩体结构单元三维构模数据,建立由钻孔数据所得到的工程岩体三维模型。     

Determination of S-wave velocity structure using microtremors and spac method applied in Thessaloniki (Greece)

Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the V_s velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of V_s profiles reached a depth of 320 m. Comparisons with V_s values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the V_s profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein.     

Earthquake relocation and 3-dimensional crustal structure of P-wave velocity in cen-tral-western China

IntroductionUnderstandingthemechanismofcontinentalearthquakesisveryimportantforseismichaz-ardpreventionandearthquakeprediction.Themodernseismotectonictheoryandtheideaofearthquakepredictionaredevelopedmainlyfromthestudiesoninterplateearthquakes,whicharedifficulttoexplainthephenomenaofintraplateearthquakes,suchasthecontinentalearthquakesoccurredinChinesemainland.Whiletheinterplateearthquakesoccurredalongtheplatebounda-ries,theintraplateearthquakesdistributediffuselyintheinterioroftheplates.Thus…     

遥感影像三维可视化研究

利用DEM高程资料实现遥感影像的三维显示可大大提高遥感监测产品的使用价值，而商用软件成本高操作繁琐普及困难。利用计算机图形学知识和Delphi编程语言，开发了一套遥感影像三维可视化软件。对在开发过程中遇到的有关DEM数据的裁剪与拼接、图像配准、地表模拟、透视变换、消隐处理、光照和阴影效果以及颜色变换等问题的解决方案和实现方法作了简要的介绍。