The Fluxes and Behaviour of Plumes Inferred from Measurements of Coherent Structures within Images of the Bulk Flow

This paper describes how measurements of the movement of identifiable features at the edge of a turbulent plume can be interpreted to determine the properties of the mean flow and consequently, using plume theory, can be used to make estimates of the fluxes of volume (mass), momentum, and buoyancy in a plume. This means that video recordings of smoke rising from a chimney or buoyant material from a source on the sea bed can be used to make accurate estimates of the source conditions for the plume. At best we can estimate the volume flux and buoyancy flux to within about 5% and 15% of the actual values, respectively. Although this is restricted to the case of a plume rising in a stationary and unstratified environment, we show that the results may be of practical use in other more complex situations. In addition, we demonstrate that large-scale (turbulent) coherent structures at the plume edge form on a scale approximately 40% of the local (mean) plume half-width and travel at almost 60% of the average local (mean) velocity in the plume.     

秩亏自由网平差在地铁隧道保护区中的应用

地铁隧道保护区沉降监测网中包含多个基准点,依据不同基准点平差所得结果也不相同。本文引入秩亏自由网平差方法,将所有基准点视为待定参数进行平差,并通过工程实例,验证此方法在地铁隧道保护区沉降观测中有一定的适用性。     

Anomalous Western Pacific Subtropical High during Late Summer in Weak La Nia Years: Contrast between 1981 and 2013

Both 1981 and 2013 were weak La Niña years with a similar sea surface temperature (SST) anomaly in the tropical Pacific, yet the western Pacific subtropical high (WPSH) during August exhibited an opposite anomaly in the two years. A comparison indicates that, in the absence of a strong SST anomaly in the tropics, the cold advection from Eurasian high latitudes and the convection of the western Pacific warm pool play important roles in influencing the strength and position of the WPSH in August. In August 1981, the spatial pattern of 500 hPa geopotential height was characterized by a meridional circulation with a strong ridge in the Ural Mountains and a deep trough in Siberia, which provided favorable conditions for cold air invading into the lower latitudes. Accordingly, the geopotential height to the north of the WPSH was reduced by the cold advection anomaly from high latitudes, resulting in an eastward retreat of the WPSH. Moreover, an anomalous cyclonic circulation in the subtropical western Pacific, excited by enhanced warm pool convection, also contributed to the eastward retreat of the WPSH. By contrast, the influence from high latitudes was relatively weak in August 2013 due to a zonal circulation pattern over Eurasia, and the anomalous anticyclonic circulation induced by suppressed warm pool convection also facilitated the westward extension of the WPSH. Therefore, the combined effects of the high latitude and tropical circulations may contribute a persistent anomaly of the WPSH in late summer, despite the tropical SST anomaly being weak.     

江苏一次锢囚状MCS和相关中涡旋MCV的观测分析

利用常规地面和高空气象观测资料,结合气象卫星云图和雷达回波,分析了2009年6月14日15—23时(北京时,下同),造成江苏强对流天气的一个中尺度对流系统(MCS)的锢囚状特征的形成过程及其垂直结构。地面中尺度分析表明,雷暴高压东侧在飑前倒槽北端发展的闭合低压环流的东南气流将暖湿空气输送到冷性雷暴高压的北侧形成东南一西北向的暖舌,从而形成锢囚状的结构。长三角探空网资料的垂直结构分析表明,在对流层下部地面到850 hPa为冷性的雷暴高压,在对流层中部700 hPa为冷性的α中尺度涡旋(MCV),而500 hPa已转变为暖性的MCV。静力学关系可以说明MCV仅仅存在于700~500 hPa的原因和MCS下冷上暖的热力结构密切相关。     

浙江盛夏一次强对流天气的特征及其成因分析

利用常规气象观测资料、区域自动站加密观测资料、GFS 0.5°×0.5°逐6 h分析场数据,以及多普勒雷达、风廓线、微波辐射计探测资料,对2014年7月26日浙江盛夏一次强对流天气过程的特征及其成因进行了诊断分析,结果表明:此次过程发生在副热带高压边缘,由于高空槽东移过程中带来了弱冷空气的渗透,并有大量不稳定能量积聚,形成了午后"上干冷、下暖湿"这样有利于强对流发生的不稳定层结条件和环境背景场。当低层925 hPa的中尺度辐合线和对流层中层700 hPa的垂直上升运动区相重合时,中尺度辐合线附近在未来6 h内产生了强对流,这对强对流的发生发展具有一定的预报指示意义。宁波中尺度辐合线是由偏南风和东北风辐合而成,同时受沿海和喇叭口地形影响,该辐合线早已存在,之后触发了宁波地区的强对流天气。杭州中尺度辐合线是由于宁波雷暴的地面出流增强了偏东风气流,从而加强了偏东风与环境东北风的辐合,导致了杭州中尺度辐合线的形成,随后在辐合线附近出现了剧烈的对流天气。     

Improved assessments of wave-induced fatigue for free spanning pipelines

For subsea pipeline projects, the costs related to seabed correction and free span intervention are often considerable. Development of reliable methods for fatigue analyses of pipelines in free spans contributes to minimize costs without compromising pipeline integrity. Assessment of wave-induced fatigue damage on multi-span pipelines is investigated, and improved analysis methods are suggested in this paper. A time-domain (TD) algorithm is developed, which accounts for non-linear hydrodynamic loading and dynamic interaction between adjacent spans. The proposed TD approach is employed to evaluate linearized frequency-domain (FD) solutions from recognized design standards and to study the dynamic response of multi-span pipelines to direct wave loading. Differences between multi- and single-span analyses are described for the first time, and the common assumption that the main fatigue damage contribution comes from the fundamental mode is demonstrated not to hold for multi-spans. An improved FD solution capable of predicting multi-mode response is derived and demonstrated to give accurate fatigue life estimates for multi-span pipelines.     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.     

Controls on the formation of stratabound dolostone bodies,Hammam Faraun Fault block,Gulf of Suez

Dolomitization is commonly associated with crustal‐scale faults, but tectonic rejuvenation, diagenetic overprinting and a fluid and Mg mass‐imbalance often makes it difficult to determine the dolomitization mechanism. This study considers differential dolomitization of the Eocene Thebes Formation on the Hammam Faraun Fault block, Gulf of Suez, which has undergone a simple history of burial and exhumation as a result of rifting. Stratabound dolostone bodies occur selectively within remobilized sediments (debrites and turbidites) in the lower Thebes Formation and extend into the footwall of, and for up to 2 km away from, the Hammam Faraun Fault. They are offset by the north–south trending Gebel fault, which was active during the earliest phases of rifting, suggesting that dolomitization occurred between rift initiation (26 Ma) and rift climax (15 Ma). Geochemical data suggest that dolomitization occurred from evaporated (ca 1·43 concentration) seawater at less than ca 80°C. Geothermal convection is interpreted to have occurred as seawater was drawn down surface‐breaching faults into the Nubian sandstone aquifer, convected and discharged into the lower Thebes Formation via the Hammam Faraun Fault. Assuming a ca 10 Myr window for dolomitization, a horizontal velocity of ca 0·7 m year⁻¹ into the Thebes Formation is calculated, with fluid flux and reactivity likely to have been facilitated by fracturing. Although fluids were at least marginally hydrothermal, stratabound dolostone bodies do not contain saddle dolomite and there is no evidence of hydrobrecciation. This highlights how misleading dolostone textures can be as a proxy for the genesis and spatial distribution of such bodies in the subsurface. Overall, this study provides an excellent example of how fluid flux may occur during the earliest phases of rifting, and the importance of crustal‐scale faults on fluid flow from the onset of their growth. Furthermore, this article presents a mechanism for dolomitization from seawater that has none of the inherent mass balance problems of classical, conceptual models of hydrothermal dolomitization.     

免共振沉桩过程对地表振动影响的FLAC3D数值模拟

为研究免共振沉桩过程对地表振动影响,采用密度放大法以消除模型桩弹性模量过大对计算效率的影响,在有限差分软件FLAC^3D中建立了相应的连续振动沉桩模型,并和文献中的现场测试结果进行了比较,分析了激振力幅值和振动频率这两个施工参数对地表振动响应的影响。结果表明：密度放大法可有效提高数值模拟的计算效率,模拟沉桩7.0倍桩径（4.9 m）所需计算时间约为12.0 h,数值结果较好地模拟了现场测试中免共振沉桩的地表振动影响;激振力幅值和振动频率均主要对近场（水平距离为5.0倍桩径范围内）的地表振动有明显影响;临界沉桩深度与地表振动影响峰值相对应,该深度随水平距离先增大后趋于稳定;激振力幅值对临界沉桩深度的改变不明显,振动频率对远场临界沉桩深度则有较明显影响。     

普朗斑岩型铜矿床成矿元素多重分形特征及其矿化强度指示

成矿元素品位的变化受控于长期地质作用过程,具有较强的非线性特征,定量刻画其变化特征有助于深入理解成矿过程,并为找矿预测提供理论依据。运用多重分形去趋势移动均值（MFDMA） 法,分析云南普朗斑岩型铜矿床4号勘探线钻孔Cu元素品位的多重分形特征及其对矿化强度的指示意义。结果显示：所有钻孔Cu元素品位具有多重分形特征,且不同矿化等级的元素分布存在局部奇异性差异,多重分形强度随矿化强度等级减弱而增加;这些特征指示在钾硅化带—带内侧强矿化钻孔的高品位相对聚集,而带外侧角岩化—青磐岩化带的高品位相对分散;通过数据随机重排技术推测Cu品位多重分形结构奇异性差异是由其分布概率密度和长相关性共同作用引起,后者的作用贡献大于前者。