Shell‐shape and morphometric variability in Mytilus galloprovincialis from micro‐tidal environments: responses to different hydrodynamic drivers

Tidal conditions differently influence inter‐tidal organisms in terms of general physiological and metabolic responses. In this study we investigated the morphological response in shells of Mytilus galloprovincialis native to different micro‐tidal coastal environments in the Northern Adriatic Sea. Our purpose was to highlight the ecophenotypic variability across tidal levels and to elucidate how tidal currents and waves produced by anthropogenic activities may play a part in modulating shell morphology. Three sampling sites were selected: an open‐sea area 15 km off‐shore and two sites within the lagoon of Venice, the first near one of its three inlets, and the other one in the proximity of Venice city centre. At each sampling site, organisms were seasonally collected at different depths within their vertical zonation, either in the inter‐tidal zone – i.e. at both the highest and lowest tide zonation limits, and subtidally. The mussel shells were analysed by investigation of their morphometric relationships (height/length and width/length ratios) and by elliptic Fourier analysis of the shell contours. Shell thickness and condition index were also evaluated for a better comprehension of energy allocation/partitioning. Estimates based on long‐term measurements, visual observation, wind statistics and wave growth laws allowed an evaluation of the forces acting on shells. At the open‐sea site, the observed phenotypic variability of both shell shape and thickness was clearly related to the tidal vertical zonation. At the two lagoon sites, the currents generated by tidal flow through the inlet and the waves caused by the frequent passage of boats influenced both shell shape and thickness. A trade‐off between protection and growth was apparent along the tide gradient, as emphasized by the differences in the partitioning and allocation of energy between shell and flesh production.     

Application of wavelet transform analysis to landslide generated waves

The aim of this paper is to illustrate the results of a preliminary study on aerial landslide-generated waves, which has been mainly intended to establish a method for analyzing water surface records. Some simple physical experiments, reproducing the Scott Russell's wave generator, were carried out in a small two-dimensional wave flume; the Wavelet Transform (WT) is applied to analyze wave measurements and it is shown that useful information can be obtained by means of this technique. The celerity of impulsively generated waves, reflection by an overflow structure and seiching phenomena of the flume are studied. A discussion of the results along with some remarks about ongoing research is also given.     

分离入射波与反射波的解析方法

提出了一种新的分离入射波和反射波的解析方法（AM）。利用两点处的 波高信息，运用Hilbert变换得到波浪信号在复域内的解析表达式，不需要计算合成波高和相位差即可实现信号的分离。根据分离结果，可以精确地估计入射波与反射波的幅值以及反射系数等参数，能够获得入射波与反射波之间的相位信息，并且可方便地用于不规则波的分离。文中通过数值模拟与物理模型实验对AM法进行了检验，所得的结果与实际值非常吻合。     

预修正快速傅里叶变换高阶边界元方法在波浪对物体作用问题中的应用

边界元方法被广泛应用于波浪对海上婕筑物作用领域,但由于传统边界元方法的存储量和计算量均为未知量的平方量级,很难满足大范围多未知量问题的计算需要.本文基于高阶边界元方法,应用预修正快速傅里叶变换方法,使计算量与存储量分别降低至O(NlogN)和O(N)量级,并得到一个连续的压强分布以适应结构设计的要求,同时可以通过使用满...     

珠江口河流输沙、河口沉积与粒度信息之间的联系

河口三角洲地区泥沙供应充分，是现代沉积速率较高的区域。快速沉积的泥沙包含高分辨率的环境信息。采用放射性同位素测年方法研究了珠江口伶仃洋大铲湾海域6个柱样的现代沉积速率，以2mm的间隔分析了其中2个柱样上部的粒度，并对其平均粒径和珠江流域的年输沙量进行了快速傅里叶变换，以期获取河流泥沙供应、河口沉积速率和沉积物垂向粒度变化的对应关系。结果表明，大铲湾海域的沉积速率为1～3cm／a，受动力条件和泥沙供应条件的影响显著。2个柱样的平均粒径的最显著重现周期与珠江年输沙量的周期性有较好的对应关系，并可能反映了季节的、年的和多年的沉积速率信息。对于每年沉积厚度在厘米级的环境，以毫米级的高分辨率进行粒度分析，有可能揭示出沉积物供应的季节变化和年际变化。本研究亦可为其他河口的相关工作提供借鉴。     

珠江三角洲网河区水位变化趋势研究

根据珠江三角洲网河区29个验潮站的实测验潮记录,应用傅氏变换与最平滤波器串联的方法来消除月均序列的周期波动对确定水位变化趋势的影响,由低通序列一元线性回归分析确定各站水位的变化趋势;结果表明,周期波动对确定海平面变化趋势的影响是显著的.应用经验正交函数(EOF)对网河区的水位变化场进行分解,由相互独立的时间函数和空间特征函数表征网河区区域的水位变化特征;应用时间特征函数计算区域水位的平均变化率为0.02mm/a.根据验潮站的水位变化趋势,探讨网河区水位变化与河床冲淤的关系.     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

Application of wavelet transforms to the decoupling of free-roll decay data

This study presents the results of the decoupling of a free-roll decay test by wavelet transforms. A free-roll decay test was performed to determine the coefficients of damping terms in equations of motion. No motion of the model was restricted during the experiment. A slight yaw motion was found while the model was in the free-roll decay motion. It was necessary to extract a pure roll motion from the experimental data. Wavelet transforms were applied to the signals to extract the pure roll motion. The results were compared to those found through the Fourier transform. Discrete wavelet transforms were able to efficiently decouple the test signals, while the continuous wavelet transform and the Fourier transform could not.     

The Mid-atlantic Ridge (31°S–34°30′S): Temporal and spatial variations of accretionary processes

The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr⁻¹, a transitional velocity between the very slow (≤20 mm yr⁻¹) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr⁻¹) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.     

基于雷达海冰图像互相关的冰漂流场测量

我国的渤海和黄海北部在每年冬季都出现不同程度的冰情,它直接影响结冰海区的石油平台、船舶以及港口等设施的正常作业,对海冰的观测与预报随着上述海区的开发利用越发显得重要,利用航海雷达连续准确地跟踪海冰漂移运动轨迹,是当今观测、调查、研究冰漂流移动规律的有效方法之一,我国的科研人员利用雷达成像技术对渤海的冰情进行了长期的雷达海冰观测、研究,在由雷达海冰图像对海冰的物理特征的识别、分类以及冰漂流场测量方面取得了一些进展[1-4]。