略论珠穆朗玛峰重力值的推估

仅根据邻近点的重力与高程资料,采用了4种有关公式,有效地推估了珠穆朗玛峰顶上的重力值,该值为(976970±7)×10^-5m·s^-2。这一结果为精确推求珠峰大地水准面和正高提供了必要的数据     

基于规则格网数据的区域边界矢量化算法

区域分析法是在作战测绘保障中研究战场环境的基本方法。特定区域的准确、详细的描述,需要获取区域矢量边界和建立区域之间的拓扑关系。以往通常采用等值线追踪算法获取描述区域的矢量边界,其结果在边界的自封闭性、完整性和建立拓扑等方面存在问题。文中就如何对规则格网数据所描述的区域通过二值化处理,运用八向邻域的有向判断策略,提出了一种获取描述区域矢量边界的算法。     

New analytical and numerical approaches for geopotential modeling

 The standard analytical approach which is applied for constructing geopotential models OSU86 and earlier ones, is based on reducing the boundary value equation to a sphere enveloping the Earth and then solving it directly with respect to the potential coefficients _n,m . In an alternative procedure, developed by Jekeli and used for constructing the models OSU91 and EGM96, at first an ellipsoidal harmonic series is developed for the geopotential and then its coefficients _n,m ^e are transformed to the unknown _n,m . The second solution is more exact, but much more complicated. The standard procedure is modified and a new simple integral formula is derived for evaluating the potential coefficients. The efficiency of the standard and new procedures is studied numerically. In these solutions the same input data are used as for constructing high-degree parts of the EGM96 models. From two sets of _n,m (n≤360,|m|≤n), derived by the standard and new approaches, different spectral characteristics of the gravity anomaly and the geoid undulation are estimated and then compared with similar characteristics evaluated by Jekeli's approach (`etalon' solution). The new solution appears to be very close to Jekeli's, as opposed to the standard solution. The discrepancies between all the characteristics of the new and `etalon' solutions are smaller than the corresponding discrepancies between two versions of the final geopotential model EGM96, one of them (HDM190) constructed by the block-diagonal least squares (LS) adjustment and the other one (V068) by using Jekeli's approach. On the basis of the derived analytical solution a new simple mathematical model is developed to apply the LS technique for evaluating geopotential coefficients. Received: 12 December 2000 / Accepted: 21 June 2001     

以高斯理论为基础计算弯曲钻孔节点空间坐标

为了拟合出更加接近钻孔实际的曲线,结合钻孔测斜实际,以严密的高斯理论为基础,给出了以钻孔天顶角和倾角为参数的弯曲钻孔的参数方程。并在此基础上,推出了钻孔曲线各点的计算公式,更准确地描述了钻孔的实际情况,为后续工作剖面图的绘制和储量计算提供了基础。这里使用高斯和折线法作为一个实例,对比计算了赤土店铅锌矿区ZK13002钻孔。计算结果表明:在钻孔曲线形状、累计弧长、插值点特征等多个方面的高斯法都优于折线法,而因算法的改变引起的工作量又是很小的。     

Effect of wave nonlinearity on fatigue damage and extreme responses of a semi-submersible floating wind turbine

Floating wind turbine has been the highlight in offshore wind industry lately. There has been great effort on developing highly sophisticated numerical model to better understand its hydrodynamic behaviour. A engineering-practical method to study the nonlinear wave effects on floating wind turbine has been recently developed. Based on the method established, the focus of this paper is to quantify the wave nonlinearity effect due to nonlinear wave kinematics by comparing the structural responses of floating wind turbine when exposed to irregular linear Airy wave and fully nonlinear wave. Critical responses and fatigue damage are studied in operational conditions and short-term extreme values are predicted in extreme conditions respectively. In the operational condition, wind effects are dominating the mean value and standard deviation of most responses except floater heave motion. The fatigue damage at the tower base is dominated by wind effects. The fatigue damage for the mooring line is more influenced by wind effects for conditions with small wave and wave effects for conditions with large wave. The wave nonlinearity effect becomes significant for surge and mooring line tension for large waves while floater heave, pitch motion, tower base bending moment and pontoon axial force are less sensitive to the nonlinear wave effect. In the extreme condition, linear wave theory underestimates wave elevation, floater surge motion and mooring line tension compared with fully nonlinear wave theory while quite close results are predicted for other responses.     

利用铝饱和指数评价中酸性岩浆岩的含矿性——以山西省210个中酸性岩体为例

利用常量元素地球化学特征参与评价岩体的含矿性具有重要意义.通过计算山西境内210个中酸性岩体的铝饱和指数,发现含矿岩体与非矿岩体的铝饱和指数存在一个明显的分界值,即铝饱和指数大于1.7的岩体基本与矿有关,小于此值的岩体绝大多数尚未发现与矿有关.铝饱和指数可能是反映岩体中矿元素活化释放程度或能力的一项重要指标,是本次探讨的重点,对评价其他区域中酸性岩的含矿性有重要参考意义.     

影响b值计算误差的Monte Carlo实验研究

本文假设地震的发生与时间的关系遵循稳态泊松模型,假设地震震级M服从参数为1/β的指数分布,其中β=b/loge,在此基础上生成地震目录.用最小二乘法估算b值,分别从样本数量、震级间隔、震级误差三方面分析b值误差的大小.统计分析结果表明,b值的标准偏差随着样本数量的增多而减小;随着震级间隔的增大而减小;震级误差使b值的标准误差变大.本文可以为利用真实地震目录求b值时选择适当的方法提供参考.     

基于地貌单元的小区域地质灾害易发性分区方法研究

以汶川县城周边区域为研究区,分别以栅格单元与地貌单元作为单位评价单元,以信息量法与逻辑回归法两种评价模型对研究区进行地质灾害易发性评价分区。根据对评价结果的比较分析,在小区域范围内,基于地貌单元的区域易发性分区不仅仅能够更好地体现出区域内局部综合特性,而且评价分区结果与地质灾害实际分布情况更加吻合,分级层次更加明显,数学模型的适用效率很好。由此可见,在小范围区域内,基于地貌单元的地质灾害易发性评价分区具有良好的适用性与可塑性,在大比例尺地质灾害易发性和危险性制图中是一个有益的尝试与启发。     

辽东湾东部区块热带风暴设计增水的计算

以辽东湾东部区块出现的极值增水序列为例,考虑热带气旋过程出现频次的影响,采用泊松-最大熵复合极值分布进行了增水统计分析,计算得到辽东湾东部区块的增水重现值.最大100年一遇值为183cm,最大50年一遇值为158cm,皆出现于第1区块.由于受地形的影响,区块1、2与3的增水大小相似,区块4则略小.该结果对辽东湾东部区块...     

日本蟳血细胞及血液生化指标的研究

以光镜和电镜观察了日本蝠（Charybdisjaponica）血细胞的形态结构,分析了各类血细胞的大小、数量比例及功能,并测定了不同发育时期及饥饿状态的日本蝽血清主要生化指标。结果表明：日本蝠血细胞可分为4种类型,从小到大依次为：无颗粒细胞、小颗粒细胞、中间型细胞和大颗粒细胞;其核质比分别为：53．23％、33．64％...