东北帕米尔中新世中下地壳物质的折返过程：公格尔西滑脱剪切带的构造变形与年代学证据

公格尔西滑脱剪切带位于东北帕米尔公格尔片麻岩穹窿西缘。通过我们详细的野外观测、显微构造观察、石英电子背散射衍射(EBSD)测试以及锆石U-Pb测年,对公格尔西滑脱剪切带的几何学、运动学特征及其形成演化时限进行了研究。公格尔西滑脱剪切带糜棱岩中大量的石榴子石、矽线石和蓝晶石等表明其为高级变质产物。S/C组构、旋转碎斑及不对称褶皱等变形现象说明剪切带上盘向W或SW低角度剪切的运动特征。高级变质糜棱岩和浅色岩脉记录约20 Ma的206 U-238Pb锆石年龄,说明公格尔西滑脱剪切带初始形成于早中新世。结合前人研究成果,我们认为公格尔西滑脱剪切带曾是狭长的帕米尔中下地壳滑脱带的最北段。由于新生代印度亚洲大陆碰撞以后印度板块仍持续向N俯冲推进,帕米尔地壳由S向N开始增厚,进变质作用最初发生于南帕米尔,约20 Ma时到达北帕米尔。东北帕米尔中下地壳物质开始折返于中新世中期。而直到6~4 Ma,东北帕米尔公格尔地区开始快速隆起,此时公格尔新生代高级变质岩才快速折返。     

低空大比例尺地形图航测生产关键技术

针对传统航空摄影测量生产工艺在生产过程中遇到的影响大比例尺测图精度的问题,该文探讨了低空航测生产大比例尺地形图的关键技术。通过选用宽角相机、低航高飞行、强化影像匹配、野外布设标志控制点、优选平差模型、精化测图操作等改进方式,以提高大比例尺航测精度;组建无人飞艇低空航测系统,对提出的技术方法予以实现;最后给出了山西境内近30个县市建成区1∶500测绘生产实践的部分验证成果。     

The Relationship between Jurassic Coal Measures and Sandstone-type Uranium Deposits in the Northeastern Ordos Basin, China

Outcrop and drill hole data show that the Jurassic coal measures in the northeastern Ordos Basin are composed mainly of the Yan'an Formation and the lowstand system tract of the Zhiluo Formation,and there is a regional unconformity between them. The Dongsheng uranium deposit is associated with the Jurassic coal measures. Research data indicate that the Jurassic coal measures in the study area have a certain hydrocarbon-generating capacity,although the metamorphic grade is low(Ro=0.40%–0.58%). In the Dongsheng region alone,the accumulative amount of generated coalbed methane(CBM) is about 2028.29 × 108 –2218.72 × 108 m~3; the residual amount is about 50.92 × 108 m~3,and the lost amount is about 1977 × 108 m~3. Analysis of the burial history of the host rocks and the evolutionary history of the Dongsheng uranium deposit suggests that the Jurassic coal measures generated hydrocarbon mainly from Middle Jurassic to Early Crataceous,which is the main mineralization phase of the Dongsheng uranium deposit. By the Late Cretaceous,a mass of CBM dissipated due to the strong tectonic uplift,and the Dongsheng uranium deposit stepped into the preservation phase. Therefore,the low-mature hydrocarbon-containing fluid in the Jurassic coal measures not only served as a reducing agent for the formation of sandstone-type uranium deposits,but also rendered the second reduction of paleo-interlayer oxidation zone and become the primary reducing agent for ore conservation. Regional strata correlation reveals that the sandstone-type uranium reservoir at the bottom of the Zhiluo Formation is in contact with the underlying industrial coal seams in the Yan'an Formation through incision or in the form of an unconformity surface. In the Dongsheng region with poorly developed fault systems,the unconformity surface and scour surface served as the main migration pathways for low-mature hydrocarbon-containing fluid migrating to the uranium reservoir.     

架子台沟低品位铅锌矿原生晕地球化学特征及深部矿产预测

对架子台沟一带1:50 000化探异常检查中,地表发现有铅锌矿化显示,经对激电测深异常深部钻探验证发现有低品位锌矿(化)体。通过系统采集0号勘探线上的2个钻孔中岩石、矿石样品,进行原生晕特征研究分析表明:矿体近矿元素为Ag、Pb、Zn、Cd,尾矿元素为W、Sn、Bi;轴向分带序列由上至下为:Pb-Au-Ag-Mo-Bi-Sn-Cu-Cd-W-Zn。对成矿元素与相关金属元素进行聚类分析、因子分析,并结合激电测深结果,认为在矿体的侧部、深部仍可能有盲矿体。     

腾冲火山构造区马站岩浆囊地球物理特征的再探讨

云南腾冲火山盆地深部存在岩浆囊是人们关注的问题,多方面进行了大量的研究且存在不同意见。作者此前依据低电阻异常推断出位于小空山、大空山、黑空山等火山口的下部,深13~30 km范围内东西向25 km,南北向30km的低电阻率的岩浆囊,其东侧为大盈江断裂。文章利用反射地震、重力、航空磁测资料进一步探讨了岩浆囊的其他地球物理特征。由于火山喷发,不仅在火山口附近形成了局部物质亏损,而且,岩浆囊本身也亏损了岩浆物质,在重力上延图中滤去了表层的火山局部负重力异常后,呈现出大空山北侧的与低阻体相对应的负重力异常,这与岩浆囊高温熔融状态含水低密度物质有密切关系。整体的重力负异常印证了低阻岩浆囊的存在。腾冲马站岩浆囊的温度为397~651°C,平均温度为524°C,其主体中心部位不可能存在磁性体。对航磁资料的处理,消除表层火山岩影响后,仍然发现有较强磁异常,其平面投影范围与低阻体相近,推断磁异常是岩浆囊顶层,在15 km深度以上范围内,随着岩浆囊体温度逐步下降,当低于480°C以后会形成新的铁磁性矿物,因此,在囊体上层出现了范围与囊体相近的较强的磁性体。反射地震仅仅在浅部较清楚地观测到较连续的反射波界面,是浅部火山岩、含水层、以及花岗岩顶界面的反映。向深部反射界面很不连续推测是由于多次岩浆上涌,其喷发时间有先后,成分有差异,故岩浆囊物质的不均匀性,虽然由于含水、矿化、熔融体构成了低电阻的共性,可温度的不均匀,却又显示了不同期次岩浆成分有变化,由岩浆囊向地表的通道上,东部花岗岩下为高速,相对于较低温度的物质,在小空山、大空山和黑空山深部沿大盈江断裂带有东西两个大的隐伏花岗岩体之间是最新的火山喷发通道,具有相对低速的通道。     

湘南—桂东北地区寒武—奥陶纪沉积岩碎屑锆石U-Pb年代学特征及其地质意义

本文利用LA-ICP-MS分析技术,对湘南—桂东北地区寒武纪和奥陶纪沉积岩进行了碎屑锆石U-Pb年代学研究。获得有效年龄数据239组,年龄值变化范围较大(3146~474 Ma),主要集中分布于2633~2473 Ma(峰值2500Ma),1880~1521 Ma(峰值1650 Ma),1146~911 Ma(峰值970 Ma),896~720 Ma(峰值800 Ma)和682~474 Ma(峰值520 Ma)5个时间段。4件样品均记录了古太古代—中太古代年龄信息,同时以1146~911 Ma和896~720 Ma两个时间段年龄最集中,反映全球Grenville造山事件和全球Rodinia超大陆裂解事件对研究区影响显著。此外,本次还获得大量泛非期(520 Ma左右)锆石年龄,认为全球泛非事件对华夏地块及其邻区影响显著,反映华夏地块与冈瓦纳大陆可能有一定亲缘性。结合前人资料,认为研究区位于华夏地块和扬子地块西南段碰撞拼合带,研究区地层同时接受两地块物质沉积,物源主要来自华夏地块。     

低固相冲洗液在赣南再里地区的应用研究

钻进过程中,孔壁的稳定性和冲洗液的渗漏是影响钻进效率和钻孔质量的重要因素。孔内情况越复杂,施工周期越长,对冲洗液性能的要求也越高。赣南再里地区施工区构造发育复杂,地层中存在大量的松散、胶结性差的砂岩以及高岭土、绿泥石等水敏性地层,钻探施工钻孔容易缩径,孔壁稳定性差,极易出现剥落、掉块、坍塌等现象,试验采用了低固相不分散冲洗液,取得了良好的钻进效果。     

小入射角下海浪后向散射系数不对称性和各向异性分析验证

基于北京遥测技术研究所机载波谱仪实测数据以及ECMWF提供的风场数据,分析了不同风速条件下小入射角海浪平均后向散射系数不对称性与各向异性随入射角的变化特性,并对导致这一现象的原因进行了初步分析。结果表明:小入射角下,海浪平均后向散射系数随入射角增大呈现递减趋势并在18°时达到某一稳定值,之后基本维持不变;海浪后向散射系数不对称性与各向异性均随入射角增大呈现递增趋势,同样在18°增大至某一稳定值,之后基本维持不变;低风速条件下,海浪不对称性和各向异性与风速有关,且风速越大不对称性与各向异性越明显。     

西秦岭上白垩统红层空间分布及其对青藏高原东北缘隆升的地质约束

通过对西秦岭上白垩统红层地层基本沉积特征的研究和空间高程分布的定量化分析,讨论了西秦岭晚白垩世时期可能的构造地貌状态及西秦岭新生代以来地壳隆升的空间变化规律。取得如下认识:1根据西秦岭上白垩统底部洪积-冲积砾岩层之上普遍存在一套厚度不等的具有风成砂岩特征的红色中细粒砂岩和上部出现以泥岩、泥质粉砂岩为主的湖相沉积,结合现今多分布在不同水系分水岭之上,以及西秦岭中部宕昌-岷县-临潭断裂带两侧上白垩统红层地层顶面高程和底部角度不整合面高程没有显著差异分析,认为西秦岭无论在晚白垩之前经历了何种构造过程,晚白垩世具有整体稳定的泛沙漠-湖盆的古构造地貌状态,且断裂带不具备控制上白垩统沉积的构造边界性质;2现今离散型分布在西秦岭的上白垩统沉积地层反映的原型盆地不是孤立的、受区域断裂控制的山间盆地,而是统一的泛沙漠-内陆湖盆,现今的离散型分布是新生代以来地壳不均匀隆升和侵蚀的结果;3西秦岭上白垩统底部的角度不整合面产状,虽然由于后期构造变动呈非完全水平状态,但总体产状平缓。从大区域尺度分析,可以近似看做原始近水平的古地貌面。通过对该角度不整合面高程信息提取和模拟分析,结果表明,其高程分布具有从南西到北东、从北西到南东逐渐降低,穿越区域断裂带没有显著梯度变化,指示了西秦岭新生代以来的隆升具有整体性和隆升幅度呈连续梯度变化的特征。这可能指示了西秦岭新生代以来的地壳隆升机制主要不是上地壳挤压逆冲缩短,而是在印度板块-欧亚板块碰撞汇聚的动力学背景下,下地壳或上地幔自西南向北东连续流变逐渐增厚,造成了青藏高原东北缘呈向北东突出的弧形扩展隆升。     

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.