Pipe laying simulation with an active reel drive

Dynamic and quasi-static models for analysis of a pipe lay spread are presented in the paper. Depending on the type of a pipe, spooling it on a big drum (reel) may cause plastic deformations. When the pipe is reeled out at sea, again it undergoes plastic deformations. In order to model such a nonlinear behaviour, a model, which includes both elasto-plastic material characteristics and large deformations, is required. Discretisation of the pipe is performed by means of the Rigid Finite Element Method (RFEM), which allows us to study static and dynamic problems, taking into account required properties of the model. Different sea conditions are simulated and analysed. It is shown how operational conditions can limit the ability of laying operation by a dedicated vessel, due to an unstable system response. The second part of the paper presents an upgrade of a passive reel drive by application of an active drive. In the model used for control applications, the pipe is modelled by a neural network. This allows us to perform a real-time calculations. In this fast-response calculation model, nonlinear aspects of the system are taken into account. The improvements in a pipe laying vessel performance are presented by some results of numerical simulations. The conclusions are also formulated.     

Optimal design of two-dimensional wings in ground effect using multi-objective genetic algorithm

The shape optimization of the 2-dimensional wing in ground effect (WIG) has been performed by the integration of CFD (computational fluid dynamics) and MOGA (multi-objective genetic algorithm). Because of the trade-off between the aerodynamic forces and the height stability, it is difficult to satisfy the design requirements of efficiency and stability at the same time. In this study, the lift coefficient, the lift-drag ratio and the static height stability are chosen as the objective functions to obtain the optimal wing profiles of a WIG craft. An NACA0015 airfoil is used for the baseline model; the aerodynamic characteristics of the base model are compared with that of the optimal solutions. The profile of the airfoil is constructed by four Bezier curves with fourteen control points resulting in the eighteen coordinates, which are adopted as the design variables. The optimal solutions of the multi-objective optimization are not unique but a set of the non-dominated optima: the Pareto frontiers or a Pareto set. As the results of the multi-objective optimization, the forty Pareto optima, which include high-lift, high-efficiency, and more stable airfoils on the edge of the 3-dimensional objective space, are obtained at thirty evolutions of the generation.     

局域椭圆偏振光束强聚焦性质的研究

数值计算了局域椭圆偏振光束强聚焦时在焦平面上的横向场强分布、纵向场强分布、横向能流以及纵向角动量分布.结果显示在焦平面上光束总的纵向角动量为零,但在不同象限光束具有不同方向的纵向角动量.当相位延迟角度在0到π之间变化时横向场强分布基本不变,但纵向场强分布有很明显的变化.液晶相位延迟器由外部电压控制,使其相位延迟角度能在0到π之间可以连续取值.因而液晶相位延迟器的外接电压可以实现对焦平面上的纵向场强以及纵向角动量的实时调控.     

Fishermen responses on marine protected areas in the Baltic cod fishery

Much of the research that concerns the impacts of management measures in the eastern Baltic cod fishery has focused on fish stock rather than understanding fishermen's attitudes towards regulations. Hence, there is little information available on fishermen's responses although they are the ones whom the regulations affect most profoundly. This study analyses the views of fishermen towards management measures with an emphasis on fishing closures (marine protected areas, MPAs). Swedish log-book data from 1996 to 2005 were used to describe MPA induced fishing effort displacements. Fishermen argued that MPAs have been inefficient in conservation of cod stock. The enlargement of Bornholm MPA in 2005 caused substantial effort displacement towards areas dominated by smaller sized fish. This contributed to the increased discarding of juvenile cod. Enlarged MPAs also intensified competition between different fleet segments and reallocated fishing areas. To reduce fishing mortality, fishermen suggested days-at-sea (effort) regulation and an effective landings control system for all fleets that exploit cod stocks in the Baltic Sea Main Basin. These measures would better motivate fishermen for mutual rule compliance, which is a prerequisite for a sustainable cod fishery.     

Comparison of long-, medium- and short-term variations of beach profiles with and without submerged geological control

Victoria Beach (Cadiz, Spain) comprises a rocky flat outcrop in its northern zone and a sand-rich southern zone. These natural features allowed for a 5-year monitoring period and subsequent analysis of two different profiles (one in each zone) based on differences in bottom contours. Topo-bathymetric data were analysed using empirical orthogonal functions (EOFs) to determine changes over the short-, medium- and long-term. Several morphologic phenomena were identified (generalised erosion, seasonal or summer–winter tilting of the profile around different hinge points, berm development and its posterior destruction, etc.) in terms of their importance in explaining the variability of the collected data for both profiles. It is worth mentioning that both profiles undergo parallel regression in the medium-term. Thus, the 1st eigenfunction enabled us to identify the true regression of the beach shoreline, independent of seasonal or summer–winter slope changes. Reconstruction of profiles using EOF components demonstrated that though accretion periods in the medium-term were similar for both types of profiles, the accretion speed was much faster in the sand-rich profile than in the reef-protected profile (1.01 m³/day versus 0.33 m³/day). Moreover, the seasonal erosion rate and the subsequent shoreline retreat for the sand-rich profile were much larger than for the reef-protected profile (121 m³/year versus 29 m³/year). Analysis in the short-term (changes induced by a single day's storm) showed an instantaneous tilting of the profile, with the mobilised sand volume being much greater for the sand-rich than for the reef-protected profile (68 m³/m versus 12 m³/m).     

福建德化县九户林陶瓷土(瓷石)成矿地质条件及找矿方向

九户林陶瓷土(瓷石)矿床为碱长花岗岩脉型矿床,矿体赋存在晚白垩世碱长花岗岩体中,严格受张性断裂构造控制,矿体两侧具钾长石化带-纳长石化带-云英岩化带等蚀变分带,矿体与岩体、断裂构造组成了三位一体的成矿条件,属岩浆期后结晶分异作用形成的热液型矿床,成矿条件独特,晚白垩世碱长花岗岩(κργK2)岩体中,是该区瓷土(瓷石)找...     

柱撑蛭石吸附去除废水中重金属离子的实验研究

分别利用有机柱化剂十二烷基磺酸钠(SDS)和无机柱化剂聚羟基铝(HA)对蛭石进行柱撑制得十二烷基磺酸钠柱撑蛭石(SDS-V erm icu lite)和聚羟基铝柱撑蛭石(HA-V erm icu lite),并通过XRD、红外光谱、ZETA电位等表征手段对柱撑蛭石进行表征,同时针对柱撑蛭石对Cu2 ,Cd2 ,C r3 3种重金属离子的吸附进行研究,结果表明:吸附去除率受反应时间、重金属离子的初始浓度、pH值等因素的影响,经柱撑后的蛭石对重金属离子吸附的吸附性能比蛭石原矿要强。柱撑蛭石吸附3种重金属离子的动力学吸附过程可用E lov icb方程和双常数方程进行较好的拟合。     

收缩城市建设用地利用效率时空分异及影响机制——以黑龙江省伊春市为例

建设用地是城镇经济社会活动的空间载体,其利用效率是调控建设用地扩张和配置的重要基础.论文以收缩型城市——黑龙江省伊春市为例,利用DEA模型测算了1995-2015年伊春市建设用地利用效率分析其时空演变规律,并运用地理探测器模型探究伊春市建设用地利用效率空间分异的影响机制,结论如下:①1995-2015年伊春市建设用地利...     

激光探针等离子体质谱法（LAM—ICPMS）用于年龄锆石U—Pb定年

利用激光探针等离子体普（ＬＡＭ－ＩＣＰＭＳ）技术对中生代锆石进行了详细的２０６Ｐｂ／＾２３８定年研究。采用线扫描（Ｌｉｎｅ ｓｃａｎ）进样法减小了传统的剥深（Ｄｅｐｔｈ ｐｒｏｆｉｌｅ）进样法所引起的激光熔蚀分异效应;优化仪器参数可三ＩＣＰ－ＭＳ对Ｐｂ和Ｕ的质量歧视效应。测得了精确的＾２０６Ｐｂ／＾２３８Ｕ比值及年龄。研究结果表明,均匀颗粒锆石的＾２０６Ｐｂ／＾２３８Ｕ比值测量精度为２％～１０％,     

金矿脉分形特征及找矿意义研究

各种类型的金矿脉常呈不规则的几何形状产出,对它们用欧几里德方法进行描述和分析,不仅难以精确地说明其几何形态特征,有时甚至无法作出实际测量,因此也就很难掌握其产状变化的准确趋势,给金矿床的定量定位预测造成了困难.分形理论为获得有关隐伏矿床(脉)分布的更为准确的信息提供了有利工具.通过对招远灵山和河东两个典型金矿床矿脉分维数、几何丰度和有效紧密度等研究,讨论了分形理论在紧密结合地质特征条件下,客观准确揭示不规则矿脉变化规律及在找矿预测等方面的应用前景.