The dynamic behaviour of a river-dominated tidal inlet, River Murray, Australia

Australia's largest river, the River Murray, discharges to the southern ocean through a coastal lagoon and river-dominated tidal inlet. Increased water extractions upstream for irrigation have led to significantly reduced flows at the mouth and, as a result, the area is undergoing rapid change, particularly with regard to the rate at which sediment is being transported into the lagoon. Based on detailed and accurate bathymetric surveys it has been possible to estimate that the rate of lagoon in-filling is of the order of 100,000 m³ per year for the period June 2000 to May 2003, although the actual rate shows significant year to year variability. Dredging of the lagoon commenced in 2000 in an attempt to reverse the trend.In an effort to understand the behaviour of the inlet a one-dimensional numerical model of the inlet has been developed. The model extends the original of van de Kreeke by including a dynamic inlet throat area based on predicted river flows and a sediment transport module to predict the resulting net sediment transport. Comparisons with water level data collected on both the ocean and lagoon sides of the mouth have shown that the model is able to predict the attenuation and lag of the tidal signal reasonably well. The sediment transport model was based on predicted sediment concentrations in the surf zone and was found to predict the rate of sediment in-filling to an acceptable level of accuracy. It is envisaged that the model will be a useful management tool, especially since it is possible to manipulate river discharges to the mouth.     

Comparison of two three-dimensional hydrodynamic modeling systems for coastal tidal motion

A comparison of two three-dimensional numerical modeling systems for tidal elevations and velocities in the coastal waters is presented. The two modeling systems are: (1) the Princeton Ocean Model (POM) and (2) the MIKE 3 flow model. The model performance results for Singapore's coastal waters show that the predicted tidal elevations from the two hydrodynamic modeling systems are almost identical and are in very good agreement with field measurement data. The simulated tidal current velocities match well with field measurement data at the selected stations, but it seems that the POM provides the slightly better simulation, compared to the MIKE 3 flow model. The depth profiles of the velocities obtained from the two modeling systems may be greatly different at some time, due to the vertical diffusion coefficient calculated from different turbulent sub-models in the two modeling systems. The POM generally predicts larger peak tidal velocities. The maximum speed differences for the model results from the two modeling systems occur in the top and differ from time to time and from location to location, reaching up to 20%.     

计算域的选取对风暴潮数值模拟的影响

作者以 72 0 3号台风过程中引起的黄海沿岸水文测站的风暴潮过程为例 ,选取不同计算域 ,模拟计算的同一测站的风暴潮增水值有很大差异。只有选取整个黄渤海海域 ,才能得到较精确的风暴潮增水结果。从而揭示在封闭或半封闭海域中由风暴过程激发的区域自由振荡 ,是风暴潮增水中不容忽视的量。说明该海域中的风暴潮过程是海域整体效应的响应 ,因此认为数值模拟中计算域应选取整个封闭或半封闭海域     

Investigation on the Deposition in an Excavated Trough at the East Shore of Jiaozhou Bay, China

- Based on field investigations, this paper analyzes three types of harbour basinns and navigation channel excavated on seabed in Jiaozhou Bay, get a general rule of deposition for excavated trough, it found that pollution is one of crucial factors resulting in the deposition of the excavated trough in the east shore of Jiaozhou Bay. With these results, it predicted the annual deposition thickness for the excavated trough and disclosed the fact that it can't be deposited deadly during one storm. At the same time, with two-dimensional numerical model, it studied the effects of the excavated trough and the reclamation near shore on tidal cureent and said that the excavated trough can decrease the current velocity passing through the trough about 10- 15%, but only limited inside and near the trough and there are no effect on other regions; reclamation can cut off the pollution sources and no obvious effect on the currents of the Jiaozhou Bay. Connecting the deep trough and Cangkou tidal channel with a new     

模型沙干重度的变化规律及其在泥沙模型试验中的作用

模型沙干重度在动床模型试验中是影响起动流速比尺和冲淤时间比尺的重要参数，其随淤积历时、粒径变化、埋置深浅和加工方法的不同有着不同的变化规律。通过试验，结合已有的成果，对模型沙干重度受以上几种因素的影响进行了研究，并进一步分析了其变化规律在动床模型试验中的作用。     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

末次盛冰期以来渤、黄、东海陆架底质分布演变过程模拟研究

渤、黄、东海陆架底质的形成分布与末次盛冰期之后的海侵密切相关。末次盛冰期结束、海侵开始以来 ,潮流是渤、黄、东海陆架上的永久性主导作用应力。为从长期沉积动力演变过程的角度 ,探讨渤、黄、东海陆架底质形成分布的有关成因问题 ,利用数值模拟手段 ,再现了末次盛冰期以来 6个时期渤、黄、东海陆架潮流作用下海底的冲淤格局及底质分布。结果表明 ,扬子浅滩南侧东海外陆架的砂质沉积基本上是自 - 80 m海面以来形成的。扬子浅滩形成于 -5 2 m海面之后 ,至 - 3 0 m海面时已有一定规模 ,全新世最大海侵之后 ,逐渐形成现在规模的扬子浅滩。南黄海中部泥自 - 5 2 m海面时就已开始形成 ,- 3 0 m海面时范围很大 ,侵入北黄海 ,全新世最大海侵以来 ,逐渐调整到现在的范围。渤海中央泥、北黄海西部泥、浙闽岸外泥、辽东半岛西侧与北侧的砂质沉积、西朝鲜湾与江华湾中的砂质沉积以及苏北浅滩是自全新世最大海侵以来逐渐形成的。海州湾中砂质沉积形成的盛期在公元 8世纪之后。济洲岛西南泥、南黄海东部泥很可能分别形成于 - 3 0 m海面、- 5 2 m海面以来。全新世渤、黄、东海陆架底质分布的演变过程大致分为 2个阶段 :全新世最大海侵之前为渤、黄、东海陆架底质分布宏观格局的形成阶段 ;全新世最大海侵至今为渤     

A phase-averaged Boussinesq model with effective description of carrier wave group and associated long wave evolution

From the phase-resolving improved Boussinesq equations (Beji and Nadaoka, Ocean Engineering 23 (1996) 691), a phase-averaged Boussinesq model for water waves is derived by more effectively describing carrier wave groups and accompanying long wave evolution with less CPU time. Linear shoaling characteristics of carrier wave equations are investigated and found to agree exactly with the analytical expression obtained from the constancy of energy flux for the improved Boussinesq equations themselves, showing that the present model equations are the results of a consistent derivation procedure regarding energy considerations. Numerical simulations of the derived equations for the single wave group and narrow-banded random waves show the validity of the present model and its high performance, especially on the CPU time.     

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.     

渤海、黄海强温跃层数值预报模式

文中对前人关于水温垂直结构计算、模拟和预报研究成果进行了评价，并在此基础上建立了考虑海面吸收辐射和透射辐射、地形、风、海流、界面摩擦及其引起的混合作用的强温跃层三维数值预报模式。该模式运行的驱动量仅为风和气温场资料，因而具有较好的实用性；此外，从试报的结果看，效果是令人满意的。