氢化物发生-原子荧光光谱法则定锑精矿中的微量砷

使用氢化物发生—原子荧光光谱法测定锑精矿中的微量砷在国内外报道较少。文章在锑干扰状况试验、高锰酸钾溶液消除干扰的最佳条件选择试验、锑精矿中共存元素的干扰和消除试验的基础上,对样品进行了实测,并就其灵敏度、准确度和精密度进行了讨论。研究表明,该方法是测定锑精矿中微量砷的有效方法。     

Fast approximate EM induction modeling of metallic and UXO targets using a permeable prism

The time-domain EM induction response of non-magnetic and magnetic targets can be approximated using a conductive permeable prism composed of six faces of conductive plates, each face being composed of a set of conductive ribbons. The effect of magnetic permeability is included by the use of two “apparent flux gathering” coefficients, and two “effective magnetic permeability” coefficients, in the axial and transverse directions. These four magnetic property coefficients are a function of physical properties and geometry of the target, but are independent of prism orientation relative to a transmitter. The approximation algorithm is computationally fast, allowing inversions for target parameters to be achieved in seconds. The model is tested on profiles acquired with a Geonics EM63 time-domain EM metal detector over a non-magnetic copper pipe target, and a steel artillery shell in horizontal and vertical orientations. Results show that this approximation to a permeable prism has a capability of fitting geometric, conductivity and magnetic parameters at both early and late sample times. The magnetic parameters show strong change from early to late times on the EMI decay curve, indicating that the magnetic properties of the target have non-linear characteristics. It is proposed that these magnetic parameters and the nature of their non-linearity may carry additional discrimination information for distinguishing between intact munitions and scrap in UXO studies.     

Application of the normalized surface magnetic charge model to UXO discrimination in cases with overlapping signals

This paper presents an application of the normalized surface magnetic charge (NSMC) model to discriminate objects of interest, such as unexploded ordnance (UXO), from innocuous items in cases when UXO electromagnetic induction (EMI) responses are contaminated by signals from other objects. Over the entire EMI spectrum considered here (tens of Hertz up to several hundreds of kHz), the scattered magnetic field outside the object can be produced mathematically by equivalent magnetic charges. The amplitudes of these charges are determined from measurement data and normalized by the excitation field. The model takes into account the scatterer's heterogeneity and near- and far-field effects. For classification algorithms, the frequency spectrum of the total NSMC is proposed and investigated as a discriminant. The NSMC is combined with the differential evolution (DE) algorithm in a two-step inversion procedure. To illustrate the applicability of the DE–NSMC algorithm, blind test data are processed and analyzed for cases in which signals from nearby objects frequently overlap. The method was highly successful in distinguishing UXO from accompanying clutter.     

EM Monitoring of Crustal Processes Including the Use of the Network-MT Observations

There are several kinds of coupling mechanisms which can convert mechanical, chemical or thermal energies due to seismic or volcanic activities into electromagnetic energies. As a result of concentrated efforts in laboratory and theoretical research, the basic relationship between the intensity of electromagnetic sources and changes in mechanical, chemical and thermal state is becoming established. Also with the progress of the electromagnetic simulation techniques, it has been possible to evaluate in situ sensitivity. Based on this progress and also due to extensive improvement in measuring techniques, many field experiments have been performed to elucidate subsurface geophysical processes underlying the preparation stage, onset, and subsequent healing stage of earthquakes and volcanic eruptions. In volcanic studies, many studies have reported the measurement of electromagnetic signals which were successfully interpreted in terms of various driving mechanisms. Although there have been numerous reports about the existence of precursory electromagnetic signals in seismic studies, only a few of them could be successfully explained by the proposed mechanisms, whereas coseismic phenomena are often consistent with those mechanisms including the absence of detectable signals. In many cases, one or two orders of higher sensitivity were required, especially for precursory signals. Generally, electromagnetic methods are more sensitive to near-surface phenomena. It will be necessary to discriminate electromagnetic signals due to these near-surface sources, which often possess no relationship with the crustal activities. Further efforts to enhance in situ sensitivity through improvements in observation techniques and in data processing techniques are recommended. At the same time, multi-disciplinary confirmation against the validity of electromagnetic phenomena will inevitably be necessary. A Network-MT observation technique has been developed to determine large-scale deep electrical conductivity structure. In the method, a telephone line network or purpose-built long baseline cables are utilized to measure voltage differences with long electrode separations. Because of the averaging effect of the electric fields, static shift problems due to small-scale, near-surface lateral heterogeneities can be alleviated. Several field experiments revealed regional scale deep electrical conductivity structures related to slab subduction or its stagnation, which enable us to elucidate underlying physical processes caused by the slab motion. The technique can also be applied to monitor the electric potential field related to crustal activities. The annual variation of the potential field and electrical conductivity in the French Alps were interpreted to be caused by the annual variation of lake water level. The method was also used to monitor the regional scale spatio-temporal variation of the SP field and electrical conductivity before and at the onset of earthquakes and volcanic eruptions.     

重磁数据的线性滤波与反演失真问题

文中对国内研制的4种主要线性滤波方法进行了对比分析。选出一种具代表性的滤波方法,用计算机模拟观测场,探讨了在复杂干扰下重磁异常因滤波引起的失真,并就重磁异常在因滤波而引起失真的情况下如何反演解释,提出了可行的办法和建议。     

Modelling of space weather effects on pipelines

The interaction between the solar wind and the Earth's magnetic field produces time varying currents in the ionosphere and magnetosphere. The currents cause variations of the geomagnetic field at the surface of the earth and induce an electric field which drives currents in oil and gas pipelines and other long conductors. Geomagnetically induced currents (GIC) interfere with electrical surveys of pipelines and possibly contribute to pipeline corrosion.In this paper, we introduce a general method which can be used to determine voltage and current profiles for buried pipelines, when the external geoelectric field and the geometry and electromagnetic properties of the pipeline are known. The method is based on the analogy between pipelines and transmission lines, which makes it possible to use the distributed source transmission line (DSTL) theory. The general equations derived for the current and voltage profiles are applied in special cases. A particular attention is paid to the Finnish natural gas pipeline network.This paper, related to a project about GIC in the Finnish pipeline, thus provides a tool for understanding space weather effects on pipelines. Combined with methods of calculating the geoelectric field during magnetic storms, the results are applicable to forecasting of geomagnetically induced currents and voltages on pipelines in the future.     

电偶源频率电磁测深视电阻率多参量联合反演效果检验

通过大量的数值模拟试验 ,对电偶源频率电磁测深 (FEMS)视电阻率多参量联合反演的效果进行了检验和对比 .结果表明 ,多参量联合反演具有较快的收敛速度和较高的拟合精度     

电磁辐射异常分析方法研究

利用河北省电磁台网１９８８～１９９２年的观测资料，对不同台站不同方向的异常映震能力进行了分析研究。并运用信息论方法计算了各台信息水平作为其信息可信度的权系数，对各台资料采用加权平均的方法进行了合成处理，发现比平时采用的等权平均效果要好。同时对其异常频次的累加合成对应地震的异常特征进行了初步的探讨     

长周期地震观测中的环境干扰

文章根据长周期地震观测的理论和我国763长周期台网的观测实践,分析了长周期观测中的环境干扰。认为长周期观测对环境干扰(主要指温、湿度)敏感,但影响长周期仪器正常工作的关键是潮湿,尤其是记录室的潮湿。文章以763台网优秀台站的观测实践为例,认为只要掌握了环境干扰的规律,在防潮问题上采取有效措施,长周期地震观测是完全可以做到仪器工作稳定,管理得心应手。     

偏光显微镜聚敛光系统光路分析

通过实验和计算，文章证明了勃氏镜进入显微光路后，可使整个显微镜系统变成望远系统，望远系统接收平行光信号，形成干涉图或偏光图像，而显微系统接收非平行光信号形成矿物像，文章不仅对偏光图和干涉图在显微镜筒中的光路变化及成像机理进行了深入讨论，并且对如何保持干涉图和偏光图像清晰提出了调试意见。