Acoustic plane-wave scattering from a rough surface over a random fluid medium

Acoustic plane-wave scattering from a rough surface overlying a fluid half-space with a sound-speed distribution subject to a small random variation is considered. Under the assumption that the surface roughness and medium randomness are statistically independent, the scattered field may be derived by first solving for the mean field in the medium, and then incorporating with boundary-perturbation method to obtain the total mean field and the power spectral density of the scattered field. The employed algorithm is compatible to the analysis available in the existing literature so that the formulations are conveniently integrated. The results for the power spectral density have shown that the effects of medium inhomogeneities on the rough surface scattering are limited in a spectral regime where the scattered components have shallow grazing angles. The distribution of the power spectral density over the space is primarily governed by the power spectrum and correlation lengths of the rough surface.     

度量泥炭腐殖化度的一种简便方法:泥炭灰度

介绍了一种度量泥炭腐殖化程度简便易得的指标——灰度。通过将同一剖面灰度测量结果与传统的腐殖化度测量结果进行对比，发现二者的变化具有较强的相关性，说明导致二者变化的因素大致相同。泥炭赋色物质鉴定的实验表明腐殖质含量变化是引起灰度在剖面上变化的原因，从而进一步论证了用灰度值作为泥炭腐殖化程度指标的可行性。     

双层局部开孔板沉箱对波浪反射的理论研究

提出了一种用于研究由双层开孔板和一个不透水后板的开孔结构对斜向波反射率的理论分析方法。整个流域被分成三个子域，在每个子域内应用特征函数展开法以得到该域内包含未知展开系数的势函数的表达式，在速度势的展开中，考虑了非传播模态波浪的影响。通过匹配开孔板处的边界条件可以求解待定的展开系数，继而求解双层开孔板防波堤结构对斜向波的反射率。数值计算结果与试验结果进行了比较，符合较好。并进一步讨论了几个重要因素对反射系数的影响。     

非常规管节点疲劳寿命分析与计算

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

长江口区风浪要素计算的探讨

本文以长江口区波浪实测资料为依据，对目前国内外常用的风浪要素计算方法进行了比较分析，认为就目前资料条件下，最适用于长江口区的、能满足工程设计等要求的风浪要素计算方法为莆田试验站方法（莆田公式）。     

海洋中液-固界面作用的分形研究Ⅰ.SAXS法测量固体交换剂的分维

本文将分形作为一个新概念,应用到海洋化学的液-固界面作用的一系列的研究上。根据用SAXS法测定一些常见的粘土矿物(高岭石,蒙脱石)和水合氧化物(水锰矿、δ-MnO_2、氧化铁凝胶、针铁矿、无定形氧化铁)的分维结果,可将这些结果划分成三类:(1)小尺度模量下具有表面分形;大尺度模量下具有质量分形。(2)只有一种分维值的表面分形。(3)在小尺度模量下和大尺度模量下分别具有不同分维值的表面分形。     

A polar method for obtaining wave resonating quadruplets in finite depths

A polar method for obtaining wave resonating quadruplets {K₁, K₂, K₃, K₄} in the computation of nonlinear wave–wave interaction source term of the wave model is presented with results for both deep and finite water depths. The method first determines the end radial points of the locus equation for K₂, for each set of input wave vectors (K₁, K₃) on the symmetry. The locus of K₂ (and hence K₄) is then traced in the anti-clockwise direction starting with the maximum radial point on the line of symmetry. It is shown that when k₃>k₁, the number of points on the locus varies when the orientations of the input wave vectors are changed and reduces when the difference in the magnitude of the input wave vectors is increased. A significant advantage in this method is that the angular increment on the locus for K₂ can be kept constant.     

耿贝尔逻辑模型在极值风速和有效波高联合概率分布中的应用

首先介绍了耿贝尔逻辑模型，采用该模型对南海海域的涠州岛海洋站的风速和有效波高实测数据进行了分析，结果表明耿贝尔逻辑模型较好地描述了年极值风速和有效波高两随机变量的联合分布；采用得到的极值风浪联合概率分布推算了不同重现期的极值风速和波高，表明考虑风速和波高相关性对设计荷载的确定有显著影响。由于耿贝尔逻辑模型具有函数结构简单，参数估计方便，因此有望成为极值风速和波高联合分布的较理想概率模型。     

Air-Sea Gas Transfer Velocity in Stormy Winter Estimated from Radon Deficiency

Thirteen vertical profiles of ²²⁶Ra and ²²²Rn in the near-surface water were obtained in the western North Pacific in winter, and the gas transfer velocities across the air-sea interface were estimated. The transfer velocities found by applying a steady state model varied widely from 2.1 to 30.2 m day⁻¹ with a mean of 9.4 m day⁻¹. The mean value is almost 5 times higher than that in summer in other oceans, and the maximum value is a record high for world oceans. This is partly due to the inadequacy of the steady state model, which overestimates when stronger winds blow in more recent days than the ²²²Rn half-life of about 4 days. In fact, a strong low pressure zone passed through the station about 2 days earlier, which was one of the low pressure zones that with a period of develop once a week or so in the northwestern North Pacific in winter. Instead of steady-state removal, if half of the radon removal occurred sporadically every 7 days, and the last removal took place two days before the observation, the transfer velocity would be 26 m day⁻¹. Our mean transfer velocity, which is less than 20% different from the steady state value including both overestimated and underestimated values, 9.4 ± 4.8 m day⁻¹, seems to represent the mean state of this region in winter. This suggests that the gas exchange fluxes under extremely rough conditions in the open ocean are larger than those estimated by using a transfer velocity equation with a linear or quadratic relationship with wind speed. This revised version was published online in July 2006 with corrections to the Cover Date.