Gravity and magnetic signatures of volcanic plugs related to Deccan volcanism in Saurashtra, India and their physical and geochemical properties

The Bouguer anomaly and the total intensity magnetic maps of Saurashtra have delineated six circular gravity highs and magnetic anomalies of 40-60 mGal (10⁻⁵m/s²) and 800-1000 nT, respectively. Three of them in western Saurashtra coincide with known volcanic plugs associated with Deccan Volcanic Province (DVP), while the other three in SE Saurashtra coincide with rather concealed plugs exposed partially. The DVP represents different phases of eruption during 65.5±2.5 Ma from the Reunion plume. The geochemical data of the exposed rock samples from these plugs exhibit a wide variation in source composition, which varies from ultramafic/mafic to felsic composition of volcanic plugs in western Saurashtra and an alkaline composition for those in SE Saurashtra. Detailed studies of granophyres and alkaline rocks from these volcanic plugs reveal a calc-alkaline differentiation trend and a continental tectonic setting of emplacement. The alkaline plugs of SE Saurashtra are associated with NE-SW oriented structural trends, related to the Gulf of Cambay and the Cambay rift basin along the track of the Reunion plume. This indicates a deeper source for these plugs compared to those in the western part and may represent the primary source magma. The Junagadh plug with well differentiated ring complexes in western Saurashtra shows well defined centers of magnetic anomaly while the magnetic anomalies due to other plugs are diffused though of the same amplitude. This implies that other plugs are also associated with mafic/ultramafic components, which may not be differentiated and may be present at subsurface levels. Paleomagnetic measurements on surface rock samples from DVP in Saurashtra suggest a susceptibility of 5.5×10⁻² SI units with an average Koenigsberger ratio (Q_n) of almost one and average direction of remanent magnetization of D=147.4° and I=+56.1°. The virtual geomagnetic pole (VGP) position computed from the mean direction of magnetization for the volcanic plugs and Deccan basalt of Saurashtra is 30°N and 74°W, which is close to the VGP position corresponding to the early phases of Deccan eruption. Modeling of gravity and magnetic anomalies along two representative profiles across Junagadh and Barda volcanic plugs suggest a bulk density of 2900 and 2880 kg/m³, respectively and susceptibility of 3.14×10⁻² SI units with a Q_n ratio of 0.56 which are within the range of their values obtained from laboratory measurements on exposed rock samples. The same order of gravity and magnetic anomalies observed over the volcanic plugs of Saurashtra indicates almost similar bulk physical properties for them. The inferred directions of magnetization from magnetic anomalies, however, are D=337° and 340° and I=−38° and −50° which represent the bulk direction of magnetization and also indicate a reversal of the magnetic field during the eruption of these plugs. Some of these plugs are associated with seismic activities of magnitude ≤4 at their contacts. Based on this analysis, other circular/semi-circular gravity highs of NW India can be qualitatively attributed to similar subsurface volcanic plugs.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

GIS与土壤溶质运移模型结合研究进展

地理信息系统对土壤溶质模型研究而言，使用者的要求与GIS所能提供的功能之间，还存在巨大的差距。出于对环境问题的关注，土壤中水分及溶质运移的规律及其对环境的影响，成为当前研究的热点。随着对土壤溶质运移模型研究的深入，一方面由于田间土壤特性具有很大的空间变异；另一方面，在实际应用中，往往溶质运移的宏观特征而非微观特征，具有更重要的意义。将溶质运移模型与GIS技术结合，定量研究空间尺度的溶质运移，成为溶质运移研究的必然发展趋势。由于计算机软硬件技术的发展，GIS正处于一个高速发展的时期。将GIS与溶质运移模型相结合，或者进一步，以GIS理论和技术为基础，建立基于GIS的溶质运移模型，将对溶质运移的规律及其对环境的影响，做出更深入和准确的描述。     

珠江三角洲地区一体化交通运输网络发展构想

从区域经济一体化角度分析了珠江三角洲经济区交通运输的现状、问题和发展趋势，提出了建设一体化交通运输网络的基本思路和总体构想。认为珠三角交通运输设施虽然种类齐全且发展迅速，但还存在数量、质量、结构、布局等方面与区域经济一体化和未来发展趋势不相适应的问题；为了促进区域经济一体化，交通运输应从被动适应变为主动发展并引导城镇体系和生产力布局，从注重设施数量变为强调设施质量并向高速高效型发展；应该分4个层次建设3个枢纽和3大组团并与大运量快速干线相连接，构建区域一体化的交通运输网络。     

区域经济空间集中化的产业成因分析——兼析海南省经济空间集中化问题

经济空间集中化起因于产业经济活动在一定空间内聚集并形成大规模的专业化生产，它以区域城市为增长中心，与区域产业结构转变有着密切的关系。经济空间集中化过程大致可以划分为三个与区域产业结构转变有关的经济增长阶段：初级阶段——均衡低速增长；中级阶段——集中快速增长；高级阶段——稳定增长。     

Economic Filters Applied to Quantitative Mineral Resource Simulations

The U.S. Geological Survey has developed a technique that allows mineral resource experts to apply economic filters to estimates of undiscovered mineral resources. This technique builds on previous work that developed quantitative methods for mineral resource assessments. A Monte-Carlo calculation uses mineral deposit models to estimate commodity grades and tonnages of undiscovered deposits. The results then are analyzed using simple estimates of capital expenditures and daily operating costs for a mine and associated mill. The daily operating costs and the value of the ore are used to calculate the net present value of the deposit, which is compared to the capital expenditures to determine whether the deposit is economic. Repetition of these calculations for many deposits produces a table that can be interpreted in terms of the probability of there being deposits that have anet present value exceeding some specified amount. Sample calculations indicate that applying economic filters to simulated mineral resources might change the perception of the results compared to presenting the calculations in terms of the expected mean gross-in-place value of the minerals.     

经济全球化与国家能源安全

经济全球化进程的加快对国家经济安全提出了挑战。其中能源安全问题引起我国的关注。伴随着我国经济的快速增长和人民生活水平的提高，我国对能源的依赖程度不断提高。加强能源安全已成为21世纪中国经济社会可持续发展的重要问题之一。