桩基筒形翼状钻头的改进设计及应用

针对浙江省温州市世贸中心大厦桩基施工中硬岩钻进时出现的堵管、卡钻和效率低等问题,从所钻地层和钻头的磨损分析出发,提出了钻头的改进设计方案.改进型筒形翼状钻头比原先使用的平底滚刀钻头增加了18个孕镶金刚石-针状硬质合金复合式钻齿和3个钎头,并按受力特点进行了合理分布.实际钻进效果表明改进型钻头应用于超深、大直径钻孔的钻进效率较高、钻进过程平稳.针对钻头的实际磨损情况提出了钻头进一步改进设计的建议.     

高压旋喷桩复合地基在高层住宅楼中的应用

以郑州市某高层住宅楼工程为例,介绍了高压旋喷桩复合地基的设计计算和施工方法,经静荷载试验和建筑物沉降观测,复合地基的承载力可以满足设计要求,说明高压旋喷桩复合地基可以成功地用于高层住宅楼的建筑中.     

复杂条件下深圳汝南大厦基础工程方案的优选与实践

位于复杂地质条件和环境条件下的深圳汝南大厦在基坑支护的施工过程中出现钻进困难,必须重新选择基础工程施工方案.结合场地特殊地质和环境条件在对人工挖孔桩、换填法、树根桩法、旋喷桩复合地基等8种基础工程施工方案进行分析与优选的基础上,借助模糊决策理论进行方法优选验算,最终选定了人工挖孔桩加部分钻(冲)成孔灌注桩的方案.采用该方案在深圳市汝南大厦的施工实践表明其施工效果良好.     

现浇薄壁管桩复合地基非线性有限元分析

现浇薄壁管桩是处理大面积软土地基的一项新技术,目前已在沿海软土地区高速公路建设中得到了一定的应用,但其产生的时间较短,开展的研究相对较少,利用Plaxis岩土工程有限元软件对现浇薄壁管桩（PCC桩）的工作特性、荷载传递规律及其影响因素、加固机理等方面进行了详细的分析,结果表明,桩外壁摩阻力随桩深近乎呈线性分布,桩内壁摩擦力只在桩下端一定长度内有所发挥,桩芯土体具有较好的闭塞效应,研究成果具有较大的指导意义.     

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.     

Variational analysis of dynamics of fissured poroelastic rocks

Rocks can be modeled in a continuum framework as fissured, poroelastic materials, i.e., materials with two degrees of porosity, one due to the fissures and another one due to the pores. The governing equations of motion of fissured poroelastic rocks established by Beskos are rederived here by establishing a variational statement which also provides the boundary conditions of the problem. This is accomplished by considering strain, dissipation and kinetic energies as well as the work of external forces. The above statement is also derived here by employing the method of weighted residuals.     

斜列构造型式空间定位研究及其对隐伏矿脉预测的意义

斜列状的断裂、裂隙的排列组合,其中往往充填岩脉或矿脉,被称之为雁列或斜列构造。在内生脉状多金属矿床平面或剖面上,矿脉常出现斜列状排列的组合特征,关于它们的组合型式,特别是从空间上及定位分布规律方面,尚缺乏深入的研究。本文依据构成斜列型式的几个主要几何要素之间的关系将其划分为三种类型,进行了斜列构造型式空间定位分布特征的研究及其对隐伏矿脉预测意义的探讨。     

Copper demand,supply, and associated energy use to 2050

To a set of well-regarded international scenarios (UNEP’s GEO-4), we have added consideration of the demand, supply, and energy implications related to copper production and use over the period 2010–2050. To our knowledge, these are the first comprehensive metal supply and demand scenarios to be developed. We find that copper demand increases by between 275 and 350% by 2050, depending on the scenario. The scenario with the highest prospective demand is not Market First (a “business as usual” vision), but Equitability First, a scenario of transition to a world of more equitable values and institutions. These copper demands exceed projected copper mineral resources by mid-century and thereafter. Energy demand for copper production also demonstrates strong increases, rising to as much as 2.4% of projected 2050 overall global energy demand. We investigate possible policy responses to these results, concluding that improving the efficiency of the copper cycle and encouraging the development of copper-free energy distribution on the demand side, and improving copper recycling rates on the supply side are the most promising of the possible options. Improving energy efficiency in primary copper production would lead to a reduction in the energy demand by 0.5% of projected 2050 overall global energy demand. In addition, encouraging the shift towards renewable technologies is important to minimize the impacts associated with copper production.     

冰盖下矩形河道的综合糙率

综合糙率是采用曼宁公式确定河道水位和流量关系的关键参数。在河道冰封期,冰盖的出现增加了流动的阻力,明流条件下确定的综合糙率不再适用,需要重新估算。基于Einstein阻力划分过流断面的原理,冰盖下矩形河道的过水断面可划分为冰盖区、河床区和边壁区。根据总流的连续性方程,在确定各分区糙率系数、水力半径和断面面积的基础上,提出了冰盖下矩形河道综合糙率的计算公式。采用已有的试验水槽测量数据和天然河道实测资料对公式进行了验证,结果表明:公式计算的综合糙率与实测值吻合较好,与Einstein公式和Sabaneev公式相比,计算精度更高;对于冰封水流,宽浅河道采用分区水深代替水力半径进行简化计算的条件有别于明渠水流,在宽深比大于20时,计算结果才满足精度要求。