典型矿区深层地下水重金属含量特征及健康风险评价——以皖北矿区为例

以皖北矿区为例,分析测试了不同含水层(松散、煤系、太灰、奥灰)中的6种重金属元素(Cd、Cr、Cu、Zn、Pb、Ni),对其含量特征及健康风险评价进行了研究。结果表明,6种重金属在不同含水层含量大小次序各不一样,从整体来看,研究区地下水中所测重金属含量依次为NiZnPbCuCdCr,与太灰水一致;整体地下水中Cr、Cu和Zn均未超过(GB/T14848—93)中Ⅲ类水质标准,Cd、Pb和Ni有部分水样超过标准限值。化学致癌物Cd和Cr在各含水层所致健康危害风险值数量级在10-6~10-4 a-1,Cr健康风险值在各含水层中均大于Cd,Cr在煤系含水层危害风险值(1.29×10-4 a-1)已超过美国环境保护局(USEPA)最大可接受风险(1×10-4 a-1),为研究区首要的环境健康风险管理控制指标。化学非致癌物Cu、Zn、Pb、Ni四种重金属健康危害风险值较小,数量级在10–11~10-8 a-1,Pb和Ni健康危害风险值相对较高,也应引起重视。各含水层总的健康风险值大小次序为:煤系太灰奥灰松散,前三者已超过国际辐射防护委员会(ICRP)推荐的(5×10-5 a-1)最大可接受风险,其中煤系含水层总的健康风险值为1.46×10-4 a-1,已超过USEPA(1×10-4 a-1)推荐的最大可接受风险。对矿区深层地下水开展重金属含量分析和健康风险评价,可为地下水水资源的开采利用和保护提供参考。     

青海玉树地区活动断裂与地震

青海玉树是巴颜喀拉地块西南边界上的典型历史强震区。最新的活动断裂遥感解译与地表调查结果表明,该区新构造期间主要发育清水河断裂带、玉树断裂带、阿布多断裂带和杂多断裂带4条NW向左旋走滑活动断裂带。其中,构成玉树—鲜水河—小江断裂系尾端构造的玉树活动断裂带是该区活动性最显著的岩石圈断裂。该断裂是由当江断裂、结古—结隆断裂和巴塘断裂3条斜接的主干断层和夹杂其间的多条次级断裂所共同构成的Z型左旋剪切张扭性变形带。它在上新世以来和晚第四纪期间的左旋走滑速率为4.0~5.4mm/a,调节了该区大部分的块体挤出与旋转变形,并构成该区大震活动的主要控震构造。历史强震梳理和古地震研究揭示,玉树主干走滑断裂带自约14530a BP以来至少发生了包括2010年地震在内的共11次大地震,原地重复间隔平均在千年以上,最长达近3000a。1738年玉树西北地震之后,玉树—甘孜断裂带的主干断层表现为平均间隔为50~100a的低频、串联式分段破裂过程,并且大震活动存在从东南向西北迁移的趋势。通过对玉树断裂未来大地震危险性进行综合地质判定认为,该区至少仍存在6段未来百年内大地震危险程度不同的地震空区,潜在的大地震震级为Mw6.6~7.3,其中危险性相对较高的段落主要是当江断裂带的当江—拉则段和结古—结隆断裂带上的结隆—叶卡诺段与桑卡—相古段。     

A comprehensive approach to drought and desertification in Northern Nigeria

Drought has been a recurring feature of the arid and semi-arid areas of Nigeria. This paper reviews the extent, severity, and consequences of drought and desertification in Nigeria with particular emphasis on the northern part of the country. The haphazard manner in which these environmental hazards have been tackled is examined and a systematic approach for the formulation of a national policy is proposed. It is recommended that a detailed formulation and implementation of the proposed policy plan is imperative to mitigate the often devastating impacts of drought and desertification in the very prone areas of Nigeria. Until such is done, some areas of Nigeria will always be vulnerable to the whims of an inevitable climatic hazard of drought and associated land degradation in the form of desertification.     

Research on quantitative assessment of climate change risk at an urban scale: Review of recent progress and outlook of future direction

Cities are not only major contributors to global climate change but also stand at the forefront of climate change impact. Quantifying and assessing the risk potentially induced by climate change has great significance for cities to undertake positive climate adaptation and risk prevention. However, most of the previous studies focus on global, national or regional dimensions, only a few have attempted to examine climate change risk at an urban scale and even less in the case of a recent literature review. As a result, a quantitative assessment of climate change risk for cities remains highly challenging. To fill this gap, the article makes a critical review of the recent literature on urban-scale climate change risk assessment, and classifies them into four major categories of studies which jointly constitute a stepwise modelling chain from global climate change towards urban-scale risk assessment. On this basis, the study summarizes the updated research progresses and discusses the major challenges to be overcome for the seamless coupling of climate simulation between different scales, the reproduction of compound climate events, the incorporation of non-market and long-lasting impacts and the representation of risk transmission insides or beyond a city. Furthermore, future directions to advance quantitative assessment of urban-scale climate change risk are highlighted, with fresh insights into improving study methodology, enriching knowledge of climate change impact on city, enhancing abundance and accessibility to data, and exploring the best practice to provide city-specific climate risk service.     

A multi-method approach to study the stability of natural slopes and landslide susceptibility mapping

In this paper, a multi-method approach for the assessment of the stability of natural slopes and landslide hazard mapping applied to the Dakar coastal region is presented. This approach is based on the effective combination of geotechnical field and laboratory works, of GIS, and of mechanical (deterministic and numerical) stability analysis. By using this approach, valuable results were gained regarding instability factors, landslide kinematics, simulation of slope failure and coastal erosion. This led to a thorough assessment and strong reduction in the subjectivity of the slope stability and hazard assessment and to the development of an objective landslide danger map of the SW coast of Dakar. Analysis of the results shows that the slides were influenced by the geotechnical properties of the soil, the weathering, the hydrogeological situation, and the erosion by waves. The landslide susceptibility assessment based on this methodological approach has allowed for an appropriate and adequate consideration of the multiple factors affecting the stability and the optimization of planning and investment for land development in the city.     

基于生物可利用性与宽浓度范围的Hakanson潜在生态风险指数法的创建——以小秦岭金矿区农田土壤为例

Hakanson潜在生态风险指数法是土壤重金属潜在生态风险评价的一种常用方法,研究与实践证明其有效性的同时,也发现了其不足之处:忽略了土壤重金属不同形态之间潜在生态风险的差异,且只重视重金属含量高于参考值时的生态风险,而对低于参考值时的情况没有给予考虑,以致特定情况下的评价结果不能很好地反映实际生态风险,因而有必要创建适用性更广的Hakanson潜在生态风险指数法。为此,基于全过程控制优化的思想,引入了生物可利用性毒性系数,并将修正浓度与参考值差值引入计算公式,创建了基于生物可利用性与宽浓度范围的Hakanson潜在生态风险指数法,实现了对重金属不同形态风险贡献的差异及重金属浓度低于参考值情况下潜在生态风险的准确把握。以小秦岭金矿区为典型区域,辅以对采集土样重金属总量及5种形态含量的分析,开展案例研究。结果表明,基于生物可利用性与宽浓度范围的Hakanson潜在生态风险指数法能客观地揭示土壤重金属的潜在生态风险,具有更大的适应性,是一种有效的潜在生态风险评价方法。     

地质灾害危险性评估及其半定量分析法在罗家寨气田内部集输工程中的应用

罗家寨气田内部集输工程地质灾害危险性评估项目属于一级评估项目，我们在该项目中运用了GPS、遥感数字化正射影像地图等新技术、新方法，同时采用了灾损率（Zs）法、风险区划法半定量的综合评估方法，通过系统的整理第一手资料和综合分析，对本地区地质灾害危险性进行现状评估、预测评估和综合评估，评价工程建设用地适宜性并提出地质灾害的防治措施建议。     

Mineralogy and geochemistry of the Texeo Cu–Co mine site (NW Spain): screening tools for environmental assessment

The Cu–Co–Ni Texeo mine has been the most important source of Cu in NW Spain since Roman times and now, approximately 40,000 m³ of wastes from mine and metallurgical operations, containing average concentrations of 9,263 mg kg⁻¹ Cu, 1,100 mg kg⁻¹ As, 549 mg kg⁻¹ Co, and 840 mg kg⁻¹ Ni, remain on-site. Since the cessation of the activity, the abandoned works, facilities and waste piles have been posing a threat to the environment, derived from the release of toxic elements. In order to assess the potential environmental pollution caused by the mining operations, a sequential sampling strategy was undertaken in wastes, soil, surface and groundwater, and sediments. First, screening field tools were used to identify hotspots, before defining formal sampling strategies; so, in the areas where anomalies were detected in a first sampling stage, a second detailed sampling campaign was undertaken. Metal concentrations in the soils are highly above the local background, reaching up to 9,921 mg kg⁻¹ Cu, 1,373 mg kg⁻¹ As, 685 mg kg⁻¹ Co, and 1,040 mg kg⁻¹ Ni, among others. Copper concentrations downstream of the mine works reach values up to 1,869 μg l⁻¹ and 240 mg kg⁻¹ in surface water and stream sediments, respectively. Computer-based risk assessment for the site gives a carcinogenic risk associated with the presence of As in surface waters and soils, and a health risk for long exposures; so, trigger levels of these elements are high enough to warrant further investigation.     

Reliability of shallow foundations designed against bearing failure using LRFD

Worldwide, there is growing interest in the development of a rational reliability-based geotechnical design code. The reasons for this interest are at least two-fold; first, geotechnical engineers face significantly more uncertainties than those faced in other fields of engineering, therefore there is a need to properly characterize and deal with these uncertainties. Second, for decades, structural engineers have used a reliability-based design code, and there is a need to develop the same for geotechnical engineers, in order that the two groups can ‘speak the same language’. This paper develops a theoretical model to predict the probability that a shallow foundation will exceed its supporting soil's bearing capacity. The footing is designed using characteristic soil properties (cohesion and friction angle) derived from a single sample, or ‘core’, taken in the vicinity of the footing, and used in a load and resistance factor design approach. The theory predicting failure probability is validated using a two-dimensional random finite element method analysis of a strip footing. Agreement between theory and simulation is found to be very good. Therefore, the theory can be used with confidence to perform risk assessments of foundation designs and develop resistance factors for use in code provisions.     

Process of Housing Damage Assessment: The 1995 Hanshin-Awaji Earthquake Disaster Case

Rebuilding of victims' livelihoods was a crucial issue in the restoration process in the1995 Hanshin-Awaji Earthquake Disaster. Housing damage assessment influencedmost of the rebuilding of the livelihood in the long term, because the Victim Certificatesissued by the local governments based on the results of the Housing damage assessmentwas required to receive most of the individual assistance measures. In the process ofHousing damage assessment, many complex problems arose, leading to extensivework on the part of the disaster responders. Consequently, a considerable number ofvictims were dissatisfied with the assessment and applied for a resurvey. Due to a floodof requests for resurvey, disaster responders had to work on damage assessment, leavingrelief activities aside.In order to facilitate Housing damage assessment, this paper discusses thefollowing five points: (1) the processes and the problems of assessments performedin the Hanshin-Awaji Earthquake Disaster, (2) the changes in the nature of informationneeded by the victims, (3) the improvements over the present damage assessment, (4)the housing situation in Japan, and (5) the international situation on damage assessment.It is obvious from the results that a poor damage assessment system and the size ofthe disaster produced a very large work load. Differences in appreciation among theinvestigators also contributed to unfair assessments and led to the victims beingincreasingly dissatisfied by the survey results. Finally, a design concept for acomprehensive damage assessment system, which has been derived from theabove five points, is proposed for post-disaster management.