地基处理方案的模糊优化

本文首先分析了地基处理方案选择时的多层次因素关系树,然后利用模糊数学的原理对各个影响因素进行定量评价,从而使所选择的地基处理方案达到整体最优.     

纯球坐标系内各项重力校正值计算方案和计算过程

在国内,首次阐述了"纯球坐标系内各项重力校正值的计算方案和计算过程".该计算方案有如下优点:①以观测点P为中心,以球面距离am=am-1+Δa·bm-1(m=2,3,...,M)为半径将计算区划分为M个环带,再以Δλ0为由P点出发射线的角度间隔将所有环带等分为N (整数)份的计算区划分方案是最严密拼接,因而校正值的计算精度相当高.②在地形复杂和相对高差大的情况下,通过减小Δa、b和Δλ0 数值,可进一步提高计算精度.③可以直接采用带有经、纬度坐标的高程数据,进行大面积测区的各项重力校正值计算,而不受6°带和标准图幅限制.     

楼层上钻孔灌注桩施工方案可行性分析

文华大厦因设计变更，需在已施工的楼层上施工钻孔灌注桩，通过对主要受力部分AB梁进行力学分析，以及对其进行加固，解决了楼层上钻孔灌注桩施工难题。     

Aerodynamic Characteristics of the Crest with Membrane Attachment on Cretaceous Pterodactyloid Nyctosaurus

The Nyctosaurus specimen KJ1 was reconstructed under the hypothesis that there is a membrane attached to the crest; the so-called headsail crest. The aerodynamic forces and moment acting on the headsail crest were analyzed. It was shown that KJ1 might adjust the angle of the headsail crest relative to the air current as one way to generate thrust (one of the aerodynamic forces, used to overcome body drag in forward flight) and that the magnitude of the thrust and moment could vary with the gesture angle and the relative location between the aerodynamic center of the headsail crest and body’s center of gravity. Three scenarios were tested for comparison: the crest with membrane attachment, the crest without membrane attachment and the absence of a cranial crest. It was shown that the aerodynamic characteristics (increasing, maintaining and decreasing thrusts and moment) would have almost disappear in flight for the crest without membrane attachment and was non-existent without the cranial crest. It is suggested from aerodynamics evidence alone that Nyctosaurus specimen KJ1 had a membrane attached to the crest and used this reconstructed form for auxiliary flight control.     

胶州湾潮汐潮流动边界数值模拟

基于普林斯顿海洋模式,通过干湿网格判别法引入潮汐潮流的漫滩过程,考虑M₂,S₂,K₁,O₁,M₄和MS₄六个主要分潮,建立了胶州湾潮汐潮流数值模拟和预报模型,研究了该海域潮汐潮流特征,并讨论了漫滩对潮流模拟的影响。与实测资料的对比验证表明,该模式能够对胶州湾的潮汐和潮流做出较为合理的预测。给出了胶州湾潮汐、潮流、余流等分布特征,模拟的潮流场以及余流场涡旋等现象与观测符合良好;计算了潮波能通量,从能量角度探讨了潮波的传播特性;对潮位与潮流场演变规律,以及潮能通量的分析表明,胶州湾内的潮波以驻波为主。通过数值试验发现,漫滩过程的引入对胶州湾潮流速度的模拟至关重要,不考虑漫滩过程的模式会夸大或者低估潮流流速。对于滩涂面积广阔的海域来说,潮流数值模式中考虑漫滩的影响是必要的。     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

流速逆变张量隐式求解方法及其在航道港池流场计算中的应用

运用高分辨率的边界适应网格进行流体动力学数值计算时,如何提高计算稳定性和减少计算量成为数值求解的关键性问题.在非正交的边界适应坐标系中,每个动量方程中同时出现了两个交叉方向的水位偏导数项,给隐式求解带来困难,而显式格式下的时间步长由于受与空间步长有关的Courant-Friedrichs-Lewy条件限制,计算量成倍增加.本文从广义曲线坐标系下浅海动力学方程组出发,导出了流速的逆变张量所满足的动量方程组,使方程中的水位偏导数项变成了沿某一协变基向量方向占优的形式,方便地采用了交替方向隐式差分格式,从而提高了计算稳定性并减小了计算量.本文通过对澳门海域航道和港池中流场的计算,证实了该模式是一种进行高分辩率数值计算的有效方法.     

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.     

Simulation and control of the linked systems of water quantity–water quality–socio-economics in the Huaihe River basin

Abstract

This work makes explicit an algebraic expression giving the matrix of transient influence coefficients associated with a one-dimensional semi-confined aquifer model. The domain studied is divided into a series of connected and completely mixed compartments over which the governing equation is discretized. The discrete equations obtained are solved for the compartmental hydraulic head and used to derive the algebraic expression in question. The basic properties of the so-called algebraic influence coefficients are investigated. In particular, their consistency with the exact Green function is highlighted. Finally, the newly derived influence coefficients are applied to a simplified aquifer system in order to formulate and solve the problem of identifying illegal groundwater pumping.     

有限差分格式与物理量守恒性

为了成功地开展大气数值模拟,如何构造相应的离散格式是一项十分重要的工作.本文以大气球面浅水方程为例,从不同形式的微分方程组出发,分别构造了能量守恒格式、准辛格式和多守恒格式,并作相应的数值检验和比较,从中可以清楚地看到三类格式的优劣.这三类格式构造方法不同,所保持的物理守恒性不完全相同,数值计算时所需机时也不同,这些比较结果为实际工作的不同使用需求提供了选择依据.