Controls on the lateral channel-migration rate of braided channel systems in coarse non-cohesive sediment

Lateral movements of alluvial river channels control the extent and reworking rates of alluvial fans, floodplains, deltas, and alluvial sections of bedrock rivers. These lateral movements can occur by gradual channel migration or by sudden changes in channel position (avulsions). Whereas models exist for rates of river avulsion, we lack a detailed understanding of the rates of lateral channel migration on the scale of a channel belt. In a two-step process, we develop here an expression for the lateral migration rate of braided channel systems in coarse, non-cohesive sediment. On the basis of photographic and topographic data from laboratory experiments of braided channels performed under constant external boundary conditions, we first explore the impact of autogenic variations of the channel-system geometry (i.e. channel-bank heights, water depths, channel-system width, and channel slope) on channel-migration rates. In agreement with theoretical expectations, we find that, under such constant boundary conditions, the laterally reworked volume of sediment is constant and lateral channel-migration rates scale inversely with the channel-bank height. Furthermore, when channel-bank heights are accounted for, lateral migration rates are independent of the remaining channel geometry parameters. These constraints allow us, in a second step, to derive two alternative expressions for lateral channel-migration rates under different boundary conditions using dimensional analysis. Fits of a compilation of laboratory experiments to these expressions suggest that, for a given channel bank-height, migration rates are strongly sensitive to water discharges and more weakly sensitive to sediment discharges. In addition, external perturbations, such as changes in sediment and water discharges or base level fall, can indirectly affect lateral channel-migration rates by modulating channel-bank heights. © 2019 The Author. Earth Surface Processes and Landforms published by John Wiley & Sons, Ltd. © 2019 The Author. Earth Surface Processes and Landforms published by John Wiley & Sons, Ltd.     

2017年9月4日河北临城M_L4.4地震震源深度测定

震源深度是地震定位中的重要参数之一。对于一个地震,sPn与Pn震相到时差是一个常量,与震中距无关,只与震源深度和地壳模型有关。基于该理论,以河北数字台网数据为基础,识别sPn震相和Pn震相,计算2017年9月4日河北临城ML4.4地震震源深度,结果为6.86km。双差定位法是目前确定震源深度比较精确的方法,双差定位得到的震源深度为7.01km。双差定位法所用数据量比较大,计算过程繁杂。利用sPn与Pn到时差计算震源深度的结果与双差定位法结果接近,计算快速、简单,所需数据量小。因此,将该方法应用到实际工作中,可以快速、准确地测定近震震源深度。     

Active channel width as a proxy of sediment supply from mining sites in New Caledonia

Although the channel morphology of upland fluvial systems is known to be strongly controlled by sediment supply from hillslopes, it is still difficult to isolate this effect from the other controlling factors of channel forms, such as the sediment transport capacity (depending notably on the size of the catchment) and local conditions (e.g. confinement, riparian vegetation, valley-floor slope). The rivers in New Caledonia offer an interesting field laboratory to isolate the morphological effect of contrasted sediment supply conditions. Some of these rivers are known to be highly impacted by the coarse sediment waves induced by the mining of nickel deposits that started in the early 1870s, which was particularly intensive between the 1940s and 1970s. The propagation of the sediment pulses from the mining sites can be traced by the presence of wide and aggraded active channels along the stream network of nickel-rich peridotite massifs. A first set of 63 undisturbed catchments in peridotite massifs distributed across the Grande Terre was used to fit a classic scaling law between active channel width and drainage area. A second set of 86 impacted sites, where the presence of sediment waves was clearly attested by recent aerial imagery, showed systematically wider active channels, with a width ratio around 5 (established from the intercept ratio of width–area power laws). More importantly, this second set of disturbed sites confirmed that the residual of active channel widths, computed from the scaling law of undisturbed sites, is statistically positively related to the catchment-scale relative area of major mining sediment sources. It is therefore confirmed that the characterization of sediment supply conditions is crucial for the understanding of spatial patterns of active channel width, and this should be more thoroughly considered in morphological studies of rivers draining environments with contrasted geomorphic activities on hillslopes. © 2018 John Wiley & Sons, Ltd.     

双平板式透空堤消能效果评价方法

双平板式透空堤具有较为优越的消浪性能备受专家学者关注。目前关于其消浪性能的评价多采用透射波高法开展,仅考虑波高一个参数。本文采用透射波高法、波浪能量法和波能流法分别对平板式透空堤的消能效果进行评价,结果表明,综合考虑波高、水深和周期三个参数的波能流法更加全面与深入。探讨了双平板式透空堤迎浪向与背浪向处波能流的主要影响因素,结果表明,相对板宽、位置参数和波高大小对波能流的影响较板间距和潜深更加显著。     

Bench development along the regulated,lower River Dee,UK

Channel change to regulated flows along large lowland rivers with cohesive bank materials has been investigated on the lower Welsh Dee, including the tidally influenced reach. Reduction of channel width has involved the formation of a 5–40m wide discontinuous bench, often linking ‘point’ and ‘concave’ locations. Map evidence shows that wide benches occur where historically the channel had migrated laterally; narrow benches were found at stable channel locations. Auger cores of the bench deposits clearly differentiated the two contrasting depositional environments within meandering rivers: ‘point bench’ and ‘concave bench’. Around an individual bend a morphologically continuous bench showed a gradient in sediment characteristics from coarser sediments (point locations) to finer organic deposits (concave locations); it also showed a topographic gradient, gaining 0.5m in elevation around the bend suggesting that bench accretion at concave locations is faster than at point locations in fluvially dominated reaches. Such patterns are suggested to have important implications for riparian ecosystems. Copyright © 1999 John Wiley & Sons, Ltd.     

Channel precipitation dynamics in a forested Pennsylvania headwater catchment (USA)

Seasonal and event variations in stream channel area and the contributions of channel precipitation to stream flow were studied on a 106‐ha forested headwater catchment in central Pennsylvania. Variations in stream velocity, flowing stream surface width and widths of near‐stream saturated areas were periodically monitored at 61 channel transects over a two‐year period. The area of flowing stream surface and near‐stream saturated zones combined, ranged from 0·07% of basin area during summer low flows to 0·60% of total basin area during peak storm flows. Near‐stream saturated zones generally represented about half of the total channel area available to intercept throughfall and generate channel precipitation. Contributions of routed channel precipitation from the flowing stream surface and near‐stream zones, calculated using the Penn State Runoff Model (PSRM, v. 95), represented from 1·1 to 6·4% of total stream flow and 2·5–29% of total storm flow (stream flow–antecedent baseflow) during the six events. Areas of near‐stream saturated zones contributed 35–52% of the computed channel precipitation during the six events. Channel precipitation contributed a higher percentage of stream flow for events with low antecedent baseflow when storm flow generated by subsurface sources was relatively low. Expansion of channel area and consequent increases in volumes of channel precipitation with flow increases during events was non‐linear, with greater rates of change occurring at lower than at higher discharge rates. Copyright © 1999 John Wiley & Sons, Ltd.     

Bed material transport estimated from the virtual velocity of sediment

This study evaluates the possibility of determining bed material transport using the virtual rate of travel of individual particles, dimensions of the active layer of the streambed, and porosity and density of streambed material. Magnetically tagged stones and scour indicators were employed in Carnation Creek, British Columbia, to quantify transport rates. Observations cover flows up to 36 m³ s⁻¹ (τ* = 0·081). Transport rates, ranging from 0·090 to 9·7 kg s⁻¹ (0·12–13·2 m³ h⁻¹), display a relatively sensitive trend with maximum stream power, as expected. Error analysis indicates that uncertainty in virtual velocity covers the majority of sample variance. An evaluation of the two measurement techniques used to delineate active layer dimensions, magnetically tagged stones and scour indicators, indicates that they yield comparable depths, widths and transport rates over the range of flows observed. Issues for further study are discussed. © 1998 John Wiley & Sons, Ltd.     

Morphological controls on the downstream passage of a sediment wave in a gravel-bed stream

Sediment waves in river systems have been widely reported, although few studies have examined the interaction between these waves and the morphology of the reaches through which they pass. This interaction determines how waves are modified as they propagate downstream. This study documents the origin and downstream passage of an avulsion-generated sediment wave through a 374 m study reach of the Allt Dubhaig, Scotland. A nested survey framework was adopted, with volumes calculated from cross-sections spaced between 10 and 40 m apart documenting the origin and downstream passage of the wave. The wave moved through an intensively (c. 1 m cross-section spacing) monitored 120 m stretch (Reach A) within the study reach, allowing assessment of sediment exchanges between the incoming wave and the local morphology. Successive surveys show the movement of the wave through and out of the reach, and also that areas where wave sediment was deposited did not always correspond with areas of subsequent erosion. Reach A was divided into three morphologically distinct sub-reaches (1A, 2A and 3A) within which sediment fluxes and the three-dimensional distribution of erosion/deposition were estimated. Sediment wave input into 1A and 2A (relatively stable sub-reaches) caused forced bar aggradation and erosion of sediment from elsewhere within the reach, which then became part of the wave. The downstream transfer of this sediment into unstable 3A caused aggradation and, in response, widespread erosion which increased the magnitude of the sediment wave as it exited reach A. Sediment exchange between the recipient reach and the wave depends upon local morphological stability and is a crucial process affecting wave magnitude and attenuation. The macroscale sediment wave interacted with, rather than overwhelmed, the recipient morphology. © 1998 John Wiley & Sons, Ltd.     

不同气候带的河道与沙丘分布格局及其类型划分

风水交互作用是干旱区常见的地貌现象和重要的地表过程,干旱区河流通过提供物源和场所控制沙漠分布的格局,沙漠分布与风沙活动制约河道发育和泥沙输移,在不同时空尺度表现不一,但关于二者交互作用的分类处于探索阶段,尚未形成分类体系,尤其在地貌格局分类上多为定性描述。因此,自西向东选择位于3个气候带的中国西部克里雅河、中部毛不拉格孔兑以及东部西拉木伦河,利用遥感影像解译获取河道与沙丘信息,探讨近源沙丘的分布与河型之间的组合关系。结果表明：河型、河流流向与风向之间的关系、水文以及距离河道的远近影响河道与沙丘组合的地貌格局;在河道-沙丘尺度上,划分为弯曲河道-对称式边滩沙丘、顺直河道-边滩沙丘、分汊河道-心滩式沙丘、网状河道-格状镶嵌式沙丘4种类型。     

Lithofacies paleogeography mapping and reservoir prediction in tight sandstone strata: A case study from central Sichuan Basin,China

Sand-rich tight sandstone reservoirs are potential areas for oil and gas exploration. However, the high ratio of sandstone thickness to that of the strata in the formation poses many challenges and uncertainties to traditional lithofacies paleogeography mapping. Therefore, the prediction of reservoir sweet spots has remained problematic in the field of petroleum exploration. This study provides new insight into resolving this problem, based on the analyses of depositional characteristics of a typical modern sand-rich formation in a shallow braided river delta of the central Sichuan Basin, China. The varieties of sand-rich strata in the braided river delta environment include primary braided channels, secondary distributary channels and the distribution of sediments is controlled by the successive superposed strata deposited in paleogeomorphic valleys. The primary distributary channels have stronger hydrodynamic forces with higher proportions of coarse sand deposits than the secondary distributary channels. Therefore, lithofacies paleogeography mapping is controlled by the geomorphology, valley locations, and the migration of channels. We reconstructed the paleogeomorphology and valley systems that existed prior to the deposition of the Xujiahe Formation. Following this, rock-electro identification model for coarse skeletal sand bodies was constructed based on coring data. The results suggest that skeletal sand bodies in primary distributary channels occur mainly in the valleys and low-lying areas, whereas secondary distributary channels and fine deposits generally occur in the highland areas. The thickness distribution of skeletal sand bodies and lithofacies paleogeography map indicate a positive correlation in primary distributary channels and reservoir thickness. A significant correlation exists between different sedimentary facies and petrophysical properties. In addition, the degree of reservoir development in different sedimentary facies indicates that the mapping method reliably predicts the distribution of sweet spots. The application and understanding of the mapping method provide a reference for exploring tight sandstone reservoirs on a regional basis.