叠前深度偏移述评

叠前深度偏移是理想的改善复杂地区和强横向速度变化的地震资料成像技术,笔者就4种典型叠前深度偏移方法的理论基础与技术特点,存在的问题及国内外最新进展进行了讨论.     

探地雷达在公路灌注碎石桩检测中的应用

介绍了应用探地雷达检测公路灌注碎石桩的基本方法,包括数据的采集、处理与解释,指出了探地雷达检测技术能够定性分析碎石桩的桩身完整性,并在公路工程实践中取得了良好的效果.     

地质雷达快速检测运营公路隧道隐患

为了评价运行多年隧道的衬砌质量，查找隐患，开展了拱顶的地质雷达无损快速检测。在雷达波形剖面图上分析空洞、不密实异常，推断出大量隐患。物探成果经过开凿验证，证明其隐患定位成功率在85％以上。地质雷达快速检测方法为隧道病害治理提供了可靠的基础资料。     

Evolution and deposits of a gravelly braid bar, Sagavanirktok River, Alaska

The evolution, migration and deposits of a gravelly braid bar in the Sagavanirktok River, northern Alaska, are described in unprecedented detail using annual aerial photographs, ground‐penetrating radar (GPR) profiles, trenches and cores. Compound braid bars in the Sagavanirktok River form by chute cut‐off of point bars and by growth of mid‐channel unit bars. Subsequent growth is primarily by accretion of unit bars onto their lateral and downstream margins. The upstream ends of braid bars may be sites of erosion or unit bar deposition. Compound braid bar deposits vary in thickness laterally and are thickest in medial sections and near cut banks. Compound bar deposits are typically composed of three to seven sets of simple large‐scale inclined strata, each simple set formed by a unit bar. The simple large‐scale strata contain medium‐scale cross‐strata (from dune migration) and planar strata (from migration of bedload sheets). The upstream and medial parts of compound braid bar deposits show very little vertical variation in grain size, but downstream and lateral margins tend to fine upwards. The deposits are mostly poorly sorted sands and gravels, although sands tend to be deposited at the top of the braid bar, and open‐framework gravels preferentially occur near the top and base of the braid bar. The patterns of braid bar growth and migration, and the nature of the deposits, described from the Sagavanirktok River are generally similar to other sandy and gravelly braided rivers, and consistent with the theoretical braid bar model of Bridge (1993).     

Detection of Methane Hydrate-Bearing Zones from Seismic Data

Abstract. The MITI Nankai Trough wells were drilled offshore Japan in the Tokai area in 1999 and 2000. The occurrence of methane hydrate was confirmed by various indicators in the borehole logs and from core data. These findings have a large impact on potential future Japanese energy resources and other related-scientific interests.
We first tried to find the methane hydrate-bearing zones using interval velocities derived from NMO velocity analysis. However, this analysis produced poor resolution. To achieve a more detailed delineation of the gas hydrate- and gas-bearing zones, we executed a seismic impedance inversion calibrated by the logs from two of the MITI Nankai Trough wells. Although these two wells are only about 90 m apart, we were able to produce an impedance section with fine detail by adopting a simple initial model and incorporating physical properties of the methane hydrate-bearing zones. The locations of the methane hydrate-bearing zones are readily apparent in the final section.     

Blast Induced Damage and Dynamic Behaviour of Hangingwalls in Bench Stoping

This paper presents the results of a comprehensive monitoring program designed to investigate the extent of blast induced damage experienced by rock masses extracted by bench stoping methods. An array of triaxial geophones and extensometers were used to monitor blast vibration attenuation and measure hangingwall deformations during stope extraction. In addition, pre and post surveys of the hangingwall rock mass were conducted using a TV borehole camera and cavity survey instrumentation. These surveys were later used to calibrate damage profiles into the stope hangingwalls.

Peak particle velocity, hangingwall deformation measurements and stope surveys were used to develop a site specific damage model that allowed engineers to asses drilling and blasting configurations to minimise the extent of pre-conditioning and damage. In addition the study included the analysis of the frequency response, displacements and accelerations experienced by the excavation as extraction and mine filling progressed. This work aimed at improving our understanding of the influence of blasting on the dynamic behaviour of stope hangingwalls.

The study demonstrated that estimates of the maximum extent of rock mass pre-conditioning and/or damage made through the application of the Holmberg-Persson approach compared well with measured results. In addition, the study found that dynamic loading imparted on an exposed hangingwall from subsequent stope blasting was also expected to contribute to rock mass weakening and that mine filling was crucial to arrest further deterioration. Hangingwall accelerations were used to demonstrate that larger openings may be more susceptible to dynamic loading.     

Determination of the elastic modulus set of foliated rocks from ultrasonic velocity measurements

Ultrasonic measurements of compressional and shear wave velocities under hydrostatic pressure up to 70 MPa were carried out on cylindrical specimens cored across and along the foliation planes. Our measurements revealed that the foliation of the metamorphic rocks induces a clear velocity anisotropy between two orthogonal directions; faster along the foliation plane and slower across the plane in most rock types. All velocity components monotonically increase with the confining pressure, probably due to the closure of microcracks distributed in rock specimens. We determined the complete set of dynamic moduli of foliated metamorphic rocks with two assumptions; transverse isotropy due to the foliation and ellipsoidal seismic energy propagation from a point source. The calculated elastic moduli referring to different directions could be valuable for the design of various engineering structures in planar textured rock mass.     

描述黄河中下游河道横断面形态的新指标

描述河流横断面的窄深程度,无非是用来衡量它对过流能力和输沙能力的影响大小,及其在河流地貌方面的时空上的调整变化。回顾总结了以往描述横断面形态的常用指标,包括河相系数、宽深比,或湿周与平均水深的比值,指出这几种指标在描述黄河中下游河道时所存在的共同缺点:(1)缺乏物理意义;(2)不能真正代表断面的窄深程度;(3)明显的夸大了宽浅和窄深断面的差别。从表称流量的概念出发,作者认为,应该使用具有明确物理意义的等面积的表称流速来描述断面形态。如果用表称流速来衡量黄河下游河南和山东河道的断面形态的差别,就会发现,断面形态的不同,其对过流能力的影响不过1:2,远不象河相系数和宽深比所描述的达到1:6甚至1:11那样的悬殊程度;黄河下游河道主槽“多来多排”的主要影响因素是表称流速。     

富宁两次大暴雨的对比研究

对比云南富宁2001年“8·25”与2004年“5·15”两次大暴雨过程前后的雨量分布、灾情、大气环流背景,以及反映大气水汽、热力、动力条件的部分物理量场,分析它们在两次过程中的异同点,讨论各类条件对暴雨落区的指示性情况,并对“5·15”过程的雷达回波资料作简单的定量分析。     

黔西南州冰雹多普勒雷达回波特征分析

冰雹是一种中小尺度的天气现象,多发生在地形复杂的山区和丘陵地带。黔西南是典型的冰雹频繁发生的多灾地带,每年发生大小冰雹天气过程几十次,尤其是个别县的某些乡镇几乎在每一次的重大天气过程中都要遭受到冰雹的袭击,显示出冰雹天气发生过程中具有明显的区域性和局地性。因此,用多普勒雷达的观测资料来分析冰雹的发生、发展和消亡过程,得出可能降雹的区域和地点,可以提高临近预报的准确性和及时性,降低冰雹灾害性天气所带来的经济损失,是非常有用的。