四川新康风化淋滤型海泡石的热相变研究

以四川新康风化淋滤型海泡石为研究对象，利用X射线衍射分析和红外光谱分析技术，对海泡石的热相变过程及特征进行了研究。结果发现，四川新康风化淋滤型海泡石的相变过程与沉积型、热液型海泡石相变过程明显不同，其相变过程可以划分为两个阶段：800℃以下保持海泡石相；800℃以上海泡石相转化为斜顽辉石相。     

石墨炉原子吸收光谱法测定土壤样品中镉

采用磷酸氢二铵作基体改进剂塞曼扣背景石墨炉原子吸收光谱法测定土壤样品中镉，方法检出限DL=0．012μg／g，精密度RSD在3．55％～7．33％，满足了土壤样品中镉测定的镉质量要求。     

Does compaction-induced subsidence control accommodation space at the top of prograding carbonate platforms? Constraints from the numerical modelling of the Triassic Esino Limestone (Southern Alps,Italy)

The demise of the high-relief, steep-slope, prograding Ladinian-Early Carnian carbonate platforms of the Esino Limestone (Central Southern Alps of Italy) is marked by subaerial exposure of the platform top associated with different erosional (mainly karst-related), depositional and diagenetic processes (Calcare Rosso). The exposure-related deposits consist of three major facies associations: 1) residual soils with thin lenses of conglomerates with black pebbles, and, locally, weathered vulcanites; 2) chaotic breccia lenses irregularly distributed in the uppermost part of the Esino Limestone carbonate platform, interpreted as collapse breccias in karstic setting: 3) inter-supratidal carbonate cycles with dissolution and development of paleosols and tepee structures.Facies distribution follows the sub-environments of the underlying Esino Limestone. Facies 1 and 2 typically characterize the core of the platform, covering the underlying inner platform facies. Facies 3 instead develops toward the edge of the platform, above reef-upper slope facies of the prograding facies of the Esino Limestone. The thickness of facies 3 decreases toward the core of the platform. Facies distribution reflects differences in the accommodation space and sedimentary processes from the rim (highest accommodation, favouring the deposition of peritidal-supratidal carbonates) to the core (reduced accommodation, causing pedogenesis and karstification) of the carbonate system.The observed thickness changes may be controlled by different factors: 1) syndepositional tectonics, 2) subsidence induced by magmatic activity or 3) differential subsidence controlled by the stratigraphic architecture of the Esino Limestone platform and adjoining basins. As evidence of tectonics was not observed and the presence of volcanic bodies is only documented tens of km away from the study area, the scenario involving the creation of accommodation space by compaction of the basinal sediments (resedimented, fine-grained calciturbidites) during the progradation of the carbonate platform is here investigated. Numerical modelling was performed to verify the compatibility of compaction-induced subsidence with the observed depositional architecture. The models were built to simulate the architectural evolution of the platform by progressively adding layers from deepest to shallowest, while compacting the underlying sediments, in order to evaluate compaction-induced subsidence (and accommodation space for the Calcare Rosso) after the deposition of the youngest platform strata. Modelling results allow us to conclude that the wedge geometry of the Calcare Rosso, deposited on top of the extinct Esino carbonate platform, can be explained by subsidence controlled by compaction of the basinal sediments present below the early-cemented, fast prograding platform slope deposits.     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

Identification of Uranyl Minerals Using Oxygen K‐Edge X‐Ray Absorption Spectroscopy

Although most of the world's uranium exists as pitchblende or uraninite, this mineral can be weathered to a great variety of secondary uranium minerals, most containing the uranyl cation. Anthropogenic uranium compounds can also react in the environment, leading to spatial–chemical alterations that could be useful for nuclear forensics analyses. Soft X‐ray absorption spectroscopy (XAS) has the advantages of being non‐destructive, element‐specific and sensitive to electronic and physical structure. The soft X‐ray probe can also be focused to a spot size on the order of tens of nanometres, providing chemical information with high spatial resolution. However, before XAS can be applied at high spatial resolution, it is necessary to find spectroscopic signatures for a variety of uranium compounds in the soft X‐ray spectral region. To that end, we collected the near edge X‐ray absorption fine structure (NEXAFS) spectra of a variety of common uranyl‐bearing minerals, including uranyl carbonates, oxyhydroxides, phosphates and silicates. We find that uranyl compounds can be distinguished by class (carbonate, oxyhydroxide, phosphate or silicate) based on their oxygen K‐edge absorption spectra. This work establishes a database of reference spectra for future spatially resolved analyses. We proceed to show scanning X‐ray transmission microscopy (STXM) data from a schoepite particle in the presence of an unknown contaminant.     

ASTER mapping of gypsum deposits of Thumrait region of southern Oman

This study demonstrates the use of ASTER data for the mapping of gypsum deposits and associated geological formations that occurred in the Thumrait region of southern Oman. The measurement of spectra over samples of gypsum in the 1,300–2,500 nm wavelength using a PIMA spectrometer showed the presence of distinct absorptions at 1400–1600, 1750, 1940, 2,100, and 2,400 nm characteristics to O? H stretching, H₂O combinations, and S? O bending overtones and stretching, respectively. Studying the unique spectral absorption characters of gypsum samples, we developed a false color composite (FCC) and an image by decorrelation stretch using the spectral bands 7, 3, and 2 of ASTER. The results FCC showed the regions of gypsum occurrences, and the decorrelated image discriminated the gypsum occurrences from other geological formations of the area. The study of surface mineralogy of the region using the VNIR‐SWIR bands by the spectral angle mapper method showed the presence of sulfate, carbonate, and clay minerals of the geological formations in the study area. We compared the results of ASTER with the results obtained using spectral bands 12, 8, and 4 of Sentinel‐2A processed by the same methods. The study showed that the spectral bands of ASTER can be used for mapping the gypsum and associated geological formations.     

Influence analysis of gaseous absorption on “HY-1A” CZI data processing Simulation and correction for Rayleigh scattering

Besides ozone, oxygen and water vapour should be considered for their absorptive effects on ＂HY--1A＂ CZI data processing. First ,gaseous transmittances under various conditions are computed and analyzed for the band settings of this sensor. Second, transmittances under six standard atmospheres are approximated as functions of zenith angle, the water vapour transmittance is approximated as a function of water vapour content and zenith angle, and the ozone transmittance is approximated as a function of ozone content and zenith angle. Finally, taking Rayleigh scattering as an example, the influence of ignoring gaseous absorption when calculating TOA reflectance is analyzed, and the effect of applying the presented transmittance approximations to gaseous absorption correction for Rayleigh scattering in ＂HY--1A＂ CZI data processing is evaluated.     

Optical properties of the red tide in Isahaya Bay,southwestern Japan: Influence of chlorophyll a concentration

Remote sensing reflectance [R _rs(λ)] and absorption coefficients of red tides were measured in Isahaya Bay, southwestern Japan, to investigate differences in the optical properties of red tide and non-red tide waters. We defined colored areas of the sea surface, visualized from shipboard, as “red tides”. Peaks of the R _rs(λ) spectra of non-red tide waters were at 565 nm, while those of red tides shifted to longer wavelengths (589 nm). The spectral shape of R _rs(λ) was close to that of the reciprocal of the total absorption coefficient [1/a(λ)], implying that the R _rs(λ) peak is determined by absorption. Absorption coefficients of phytoplankton [a _ph(λ)], non-pigment particles and colored dissolved organic matter increased with increasing chlorophyll a concentration (Chl a), and those coefficients were correlated with Chl a for both red tide and non-red tide waters. Using these relationships between absorption coefficients and Chl a, variation in the spectrum of 1/a(λ) as a function of Chl a was calculated. The peak of 1/a(λ) shifted to longer wavelengths with increasing Chl a. Furthermore, the relative contribution of a _ph(λ) to the total absorption in red tide water was significantly higher than in non-red tide water in the wavelength range 550–600 nm, including the peak. Our results show that the variation of a _ph(λ) with Chl a dominates the behavior of the R _rs(λ) peak, and utilization of R _rs(λ) peaks at 589 and 565 nm may be useful to discriminate between red tide and non-red tide waters by remote sensing.     

Estimation of the <Emphasis Type="Italic">in situ</Emphasis> Ultraviolet-A absorption of seawater by a simple irradiance inversion model

An irradiance inversion model to estimate the in situ absorption coefficient of seawater has been developed for the Ultraviolet-A (UVA) wavelength domain. Input parameters are sun angle and the up-and downward planar irradiances measured for at least two depths. The present method does not require seawater to be sampled, and is a discrete wavelength method which returns the absorption coefficient at a given wavelength from the irradiances measured at that wavelength without assuming a spectral shape of any optical properties a priori. Comparison between the model results and spectrophotometric measurements shows that the model is practically useful when cloud cover in the atmosphere is ≤ 50%. According to the present method, measurements of the irradiances enable simultaneous observation of the in situ underwater UVA radiation level and the absorption capacity of bulk seawater using a radiometer.