流体在同心环状空间中流动时的压力损失

同心环状空间是工程上较常见到的流体流动空间，在此空间中流体流动情况的分析较复杂。工程上对其流动情况的分析常常是引用流体力学中的分析结果，但往往由于对环状空间结构的条件重视不够，引用时很容易出毛病。经过仔细推导分析，指出其应用条件，并有助于对同心环状空间中流体流动时压力损失的分析与计算     

普通克里格法在矿产储量计算中的应用

普通克里格法能充分利用样品信息，有效地提高块段平均品位及矿产储量精度。以刁泉银铜矿为实例，介绍了该方法的理论和方法应用以及储量计算流程图。     

地史转折期的生态系

生态系的演变是地球各圈层系统耦合关系变化的直接标志。地史转折期的生态系具有复杂的生物内涵，在绝灭—残存—复苏过程中，各生物类别的演替遵循着一定的生存型式。大绝灭后生态系复苏的原动力是绝灭后迁入避难所的复活类型和大绝灭末期高压环境中产生的祖先类型的新生和辐射发展。全面了解绝灭后生态系的组成和结构，对于正确认识地史转折期，即圈层耦合结点处的地质作用型式和过程具有重要作用。     

数据采集中特征点粗差定位方法的探讨

本文分析了特征点应满足的几种条件，给出了一次范围最小（Ｌ１）法，最小二乘法以及粗差探测法进行特征点粗差定位方法，并以模拟实例为例对它们进行了比较，得出了一些有意义的结论。     

静力弹塑性分析(Pushover Analysis)的基本原理和计算实例

阐述了美国两本手册FEMA273／274和ATC-40中关于静力弹塑性分析的基本原理和方法，给出了利用ETABS程序进行适合我国地震烈度分析的计算步骤，并用一框剪结构示例予以说明，表明Pushover方法是目前对结构进行在罕遇地震作用下弹塑性分析的有效方法。     

圆形截面灌注桩正截面均匀配筋计算可视化

在圆形截面均匀配筋偏心受压混凝土构件的正截面承载力基本计算公式的基础之上 ,结合基坑工程中圆截面灌注桩的受力特点 ,推导了灌注桩均匀配筋计算的有关公式 ,并以此为基础 ,利用可视化编程软件Delphi 6 .0编写了相应的配筋计算程序。通过实际例证 ,表明该程序计算快捷且结果准确。     

玉米淀粉废水回收及处理研究

采用调节等电位点—超过滤组合技术对玉米淀粉废水的资源回收和处理进行研究,确定了最佳工艺参数。结果表明通过调节等电位点,可回收粗蛋白用作家禽饲料,同时废水中的CODcr、TSS和BOD5去除率分别可达48.8%、49.6%和27.2%以上,减轻了后续超过滤处理压力;通过超过滤进一步处理,出水COD、TSS和BOD去除率分别达91.3%、92.5%和95.1%。     

SH Wave Propagation in Viscoelastic Media

When comparing solutions for the propagation of SH waves in plane parallel layered elastic and viscoelastic (anelastic) media, one of the first things that becomes apparent is that in the elastic case the location of the saddle points required to obtain a high frequency approximation are located on the real p axis. This is true of the branch points also. In a viscoelastic medium this is not typical. The saddle point corresponding to an arrival lies in the first quadrant of the complex p-plane as do the branch points. Additionally, in the elastic case the saddle point and branch points lie on a straight line drawn through the origin (the positive real axis in the complex p-plane), while in the viscoelastic case this is generally not the case and the saddle point and branch points lie in such a manner as to indicate the degree of their complex values.In this paper simple SH reflected and transmitted particle displacement arrivals due to a point torque source at the surface in a viscoelastic medium composed of a layer over a half space will be considered. The path of steepest descent defining the saddle point in the first quadrant will be parameterized in terms of a real variable and the high frequency solutions and intermediate analytic results obtained will be used to formulate more specific constraints and observations regarding saddle point location relative to branch point locations in the complex p-plane.As saddle point determination for an arrival is, in general, the solution of a non-linear equation in two unknowns (the real and imaginary parts of the complex saddle point p ₀), which must be solved numerically, the use of analytical methods for investigating this problem type is somewhat limited.Numerical experimentation using well documented solution methods, such as Newton's method, was undertaken and some observations were made. Although fairly basic, they did provide for the design of algorithms for the computation of synthetic traces that displayed more efficient convergence and accuracy than those previously employed. This was the primary motivation for this work and the results from the SH problem may be used with minimal modifications to address the more complicated subject of coupled P-SV wave propagation in viscoelastic media.Another reason for revisiting a problem that has received some attention in the literature was to approach it in a fairly comprehensive manner so that a number of specific observations may be made regarding the location of the saddle point in the complex p-plane and to incorporate these into computer software. These have been found to result in more efficient algorithms for the SH wave propagation and a significant enhancement of the comparable software in the P-SV problem.     

组合桩型复合地基计算与应用分析

为完善组合桩型复合地基设计理论，以单一桩型复合地基计算方法为基础，给出了其承载力和沉降量计算方法，提出了静载试验结果的尺寸修正方法，并与测试结果进行了验证。结果表明：经修正后，承压板下组合桩型复合地基承载力试验值与采用本文公式所得计算值吻合；采用桩间土的压缩模量乘以承载力的提高幅值，所得复合压缩模量计算组合桩型复合地基，最终沉降满足工程要求。