自重湿陷性黄土地区桩基设计探讨

根据自重湿陷性黄土的特点、《湿陷性黄土地区建筑规范》（GB50025—2004）和《建筑桩基技术规范》（JGJ94—94）中关于桩基设计的对比分析，通过自重湿陷性黄土场地工程实例分析计算，依据负摩擦产生的机理——中性点理论，论述了自重湿陷性黄土场地中桩基设计应考虑中性点，而不应全部计入负摩阻的观点。     

大变形有限元法分析边坡稳定性

边坡稳定性分析的重要任务是确定边坡潜在滑面的位置及相应的安全系数,鉴于坡体位移可在现场监测中直接得到,提出边坡潜在滑面确定的位移判据,采用大变形有限元首先计算出边坡的位移场,然后在开挖面的不同高度作塑性区内的水平位移参考线,依次连接参考线上的位移突变点即得到边坡失稳的潜在滑面位置,分析滑面上的应力以及岩体抗剪强度即得到边坡的整体安全系数。     

Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.     

基于土质边坡塑性极限分析条分法的可靠度计算方法研究

从土塑性极限分析上限定理出发,以土质边坡塑性极限分析条分法为基础,在引入可靠性分析方法(JC法)后,建立了土质边坡塑性极限分析条分法可靠度极限状态方程,并推导得到了塑性极限分析条分法可靠度计算公式。这种方法实现了定值计算向不确定性计算的转变,同时可靠度指标的计算结果具有概率的意义。     

SPOT5影像严格几何纠正方法研究

根据SPOT卫星的成像原理和特点,讨论了对SPOT5卫星影像按共线方程法进行有控制点的几何纠正的方法,经对关中、陕北和陕南三种地形的影像纠正结果进行对比检验,证明了该方法精度达到了较高水平。     

GIS中直线元内插点精度及对误差带的影响

基于误差传播定律，考虑参数r误差影响，推导了线元内插点的精度计算公式，讨论内插点精度对线元误差带的影响，并对影响的结果进行了分析，得到了一些有益的结论。     

一种层状大地瞬变电磁响应正演计算的改进方法

频谱法是瞬变电磁法正演计算中常用的计算方法之一,其关键在于内层含贝塞尔函数的积分计算。对于重叠回线装置的瞬变电磁法正演的内层积分,以往采用在积分区间内寻找贝塞尔函数的零点分布,依次在相邻零点之间采用一般的数值积分法在求得各自的积分值后再叠加的方法进行计算。这种方法精度较高,但效率低。利用贝塞尔函数的大宗量渐近特性,提出一种新的计算方法。计算结果表明,该方法计算效率高、方法简单、精度可靠。     

某大厦深基坑开挖与施工安全监测实践与体会

从深基坑安全监测实例出发,介绍了一种简便、易行、稳定、可靠的射线形水平位移基准网,同时适用用小角法高精度位移监测.另外就温度的变化对水平位移值的影响,降水施工对地面沉降,深层土体位移的影响及测斜管埋设的重要性提出了自己的观点、认识与体会,希望对类似工程有一定参考价值.     

Spectral Filtering and Classification of Terrestrial Laser Scanner Point Clouds

A method is presented for filtering and classification of terrestrial laser scanner point clouds. The algorithm exploits the four-channel (blue, green, red and near infrared) multispectral imaging capability of some terrestrial scanners using supervised, parametric classification to assign thematic class labels to all scan cloud points. Its principal advantage is that it is a completely data-driven algorithm and is independent of spatial sampling resolution since the processing is performed in four-dimensional spectral feature space. Its application to two data-sets of different spatial extent and spatial and spectral complexity is reported, for which respective overall classification accuracies of 87·0% and 82·0% were achieved. Analysis of the input data with emphasis on the characteristics pertinent to the anticipated outcomes precedes detailed analysis of the classification results and error sources and their causes. Erroneously classified points are attributed to radiometric errors stemming from both detector hardware and physical effects.