CCSD主孔微破裂脉次生包裹体的均一温度

CCSD主孔中发育有十分丰富的脆性变形现象,按其充填特征大致可划分有石英和方解石充填的微破裂、有矿物薄膜的微破裂和既无矿物充填、又无矿物簿膜的微破裂等3大类.石英微破裂脉和方解石微破裂脉次生包裹体的均一温度分别为110℃～215℃和90℃～190℃,表明前者的形成要早于后者,按现代地热梯度23.4℃/km估算,两者的形成深度分别为4.7～9.2km和3.8～8.1km,9.2km大致可作为宏观上岩石圈发生脆性变形的最大深度或岩石圈由韧性变形域向脆性变形域过渡的界线.片麻岩、榴辉岩和超基性岩微破裂脉的次生包裹体均一温度显示三者由韧性变形域向脆性变形域过渡的深度是不一致的,依次为9.2km、8.5km和8.1km,反映主孔主要岩石类型的脆性变形行为存在有一定差异.根据微破裂的充填物特征和相互切割关系,大致可确定主孔中脆性破裂的形成深度和先后关系:石英微破裂脉,形成最早,深度为4.7～9.2km,方解石微破裂脉的形成深度为3.8～8.1km,8.1km以上开始出现有矿物薄膜的微破裂,既无矿物充填、又无矿物簿膜的微破裂则是地壳深度3.8km以上的主要脆性变形构造类型.可见,微破裂次生包裹体的均一温度或许可作为宏观上建立CCSD主孔脆性变形构造剖面的重要依据之一.     

富溪双连拱隧道出口高边坡稳定性评价及支护效果分析

富溪双连拱隧道出口高边坡岩体风化、卸荷严重,在施工开挖前边坡中上部已经发生较为明显的倾倒变形,整个变形体处于极限平衡状态。本文在现场调查和岩体结构分析基础上,建立了边坡变形破坏机理的概念模型,利用FLAC3D模拟研究了开挖后坡体变形特征。在变形分析基础上,提出了对倾倒变形体采用锚管注浆处理的边坡治理措施,支护效果模拟计算表明,注浆后边坡稳定性较好,同时监测资料也显示支护措施实施后,边坡的稳定性较好,可以保障公路的施工和长期营运的安全。     

Quality Assessment of the Cobel-Isba Numerical Forecast System of Fog and Low Clouds

Short-term forecasting of fog is a difficult issue which can have a large societal impact. Fog appears in the surface boundary layer and is driven by the interactions between land surface and the lower layers of the atmosphere. These interactions are still not well parameterized in current operational NWP models, and a new methodology based on local observations, an adaptive assimilation scheme and a local numerical model is tested. The proposed numerical forecast method of foggy conditions has been run during three years at Paris-CdG international airport. This test over a long-time period allows an in-depth evaluation of the forecast quality. This study demonstrates that detailed 1-D models, including detailed physical parameterizations and high vertical resolution, can reasonably represent the major features of the life cycle of fog (onset, development and dissipation) up to +6 h. The error on the forecast onset and burn-off time is typically 1 h. The major weakness of the methodology is related to the evolution of low clouds (stratus lowering). Even if the occurrence of fog is well forecasted, the value of the horizontal visibility is only crudely forecasted. Improvements in the microphysical parameterization and in the translation algorithm converting NWP prognostic variables into a corresponding horizontal visibility seems necessary to accurately forecast the value of the visibility.     

Structural synthesis of the Northern Calcareous Alps, TRANSALP segment

The Northern Calcareous Alps (NCA) are the site of very large top-to-north convergent movements during Cretaceous–Tertiary Alpine mountain building. To determine the amount of shortening, the depth of detachment and the style of deformation, we retro-deformed an approximately 40 × 40 km area comprising the Lechtal and Allgäu Nappes. On the basis of all available geological data and processed sections of the TRANSALP reflection seismic experiment, coherent 3D models were constructed by splining lines from N–S cross-sections. Integration of 3D kinematic modeling and field data shows the following. The structure of the Lechtal Nappe is controlled by the Triassic Hauptdolomit. Four main thrusts link to a detachment at 2–6 km depth below sea level. Shortening estimates vary, from 25% (east) to 42% (west). Additional contraction is accommodated by folding. In the east the subjacent Allgäu Nappe can be traced about 10 km down-plunge, and is shortened by about one third. In the western part the downplunge width is at least 15–20 km, with restorable shortening of one third. The triple (Inntal, Lechtal, Allgäu Nappes) NCA nappe system was moved uniformly N–S to produce laterally heterogeneus shortening of 40–90 km or 50–67%. We suggest that the NCA are underlain by substantial amounts of buried Molasse sediments and/or overthrust units of Helvetic and Rheno-Danubian Flysch, indicating post-Eocene N–S shortening of at least 55 km. Restored to an initial configuration, the basin topography of the NCA reveals strong E–W thickness variations of the Triassic Wettersteinkalk and Hauptdolomit platform carbonates. Such variations may pertain to N–S trending growth faults, which were important precursors to later Jurassic extension of the Austroalpine passive margin. Such structures are unlikely to be seen in the conventional N–S cross-sections, but form an essential geometrical and mechanical element in later, convergent mountain building.     

Texture development and elastic stresses in magnesiowűstite at high pressure

Cubic magnesiowűstite has been deformed in a diamond anvil cell at room temperature. We present results for (Mg_0.4Fe_0.6)O, (Mg_0.25Fe_0.75)O, and (Mg_0.1Fe_0.9)O up to 37, 16, and 18 GPa, respectively. The diffraction images, obtained with the radial diffraction technique, are analyzed using both single peak intensities and a Rietveld method. For all samples, we observe a [100] fiber texture but the texture strength decreases with increasing iron content. This texture pattern is consistent with {110}〈1-10〉 slip. The images were also analyzed for stress, elastic strains, and elastic anisotropy. In general, the stress measured in magnesiowűstite samples is lower than previously measured on MgO. The elastic anisotropy deduced from the X-ray measurements shows a broad agreement with models based on measurements with other techniques.     

区域和全球模式的嵌套技术 及其长期积分试验

将区域模式嵌入澳大利亚CSIRO (Commonwealth Scientific and Industrial Research Organization）的全球模式中,并将其应用于区域模式的长期气候积分试验。模拟结果表明,当区域与全球模式嵌套时,边界吸收问题十分重要,由区域模式得到的高分辨率大尺度环流形式在边界上必须与全球模式提供的强迫一致,同时区域模式必须给出基于模式内部物理过程产生的高分辨信息。因此,在嵌套过程中,必须仔细考虑缓冲区的设置,使大尺度强迫与中尺度特征充分混合,既保持区域模式内外的一致性,又使区域内部中尺度强迫物理过程得到充分发展。将区域模式与澳大利亚CSIRO的9层21波三角形截断谱模式嵌套后,完成了连续3年的区域气候模式积分。模拟结果表明,由于区域模式较好地刻划了区域尺度的地形、下垫面和海岸线分布等的细节特征,模拟的区域气候特征比全球模式有较大的改进,尤其是对季风降水的模拟,区域模式明显改进了全球模式的模拟结果。     

地面激光雷达的数据处理及其精度分析

本文就地面激光雷达的数据采集工作原理、数据处理的基本流程、数据的精度情况及影响精度的因素等问题进行相应的讨论，展示了其优良的技术特性和良好的应用前景。     

Composition and evolution of lithosphere beneath the Carpathian–Pannonian Region: a review

Our knowledge of the lithosphere beneath the Carpathian–Pannonian Region (CPR) has been greatly improved through petrologic, geochemical and isotopic studies of upper mantle xenoliths hosted by Neogene–Quaternary alkali basalts. These basalts occur at the edge of the Intra-Carpathian Basin System (Styrian Basin, Nógrád-Gömör and Eastern Transylvanian Basin) and its central portion (Little Hungarian Plain, Bakony-Balaton Highland).The xenoliths are mostly spinel lherzolites, accompanied by subordinate pyroxenites, websterites, wehrlites, harzburgites and dunites. The peridotites represent residual mantle material showing textural and geochemical evidence for a complex history of melting and recrystallization, irrespective of location within the region. The lithospheric mantle is more deformed in the center of the studied area than towards the edges. The deformation may be attributed to a combination of extension and asthenospheric upwelling in the late Tertiary, which strongly affected the central part of CPR subcontinental lithosphere.The peridotite xenoliths studied show bulk compositions in the following range: 35–48 wt.% MgO, 0.5–4.0 wt.% CaO and 0.2–4.5 wt.% Al₂O₃ with no significant differences in regard to their geographical location. On the other hand, mineral compositions, particularly of clinopyroxene, vary according to xenolith texture. Clinopyroxenes from less deformed xenoliths show higher contents of ‘basaltic’ major elements compared to the more deformed xenoliths. However, clinopyroxenes in more deformed xenoliths are relatively enriched in strongly incompatible trace elements such as light rare earth elements (LREE).Modal metasomatic products occur as both hydrous phases, including pargasitic and kearsutitic amphiboles and minor phlogopitic micas, and anhydrous phases — mostly clinopyroxene and orthopyroxene. Vein material is dominated by the two latter phases but may also include amphibole. Amphibole mostly occurs as interstitial phases, however, and is more common than phlogopite. Most metasomatized peridotites show chemical and (sometimes) textural evidence for re-equilibration between metasomatic and non-metasomatic phases. However, amphiboles in pyroxenites are sometimes enriched in K, Fe and LREE. The presence of partially crystallized melt pockets (related to amphiboles and clinopyroxenes) in both peridotites and pyroxenites is an indication of decompression melting and, rarely, incipient partial melting triggered by migrating hydrous melts or fluids. Metasomatic contaminants may be ascribed to contemporaneous subduction beneath the Carpathian–Pannonian Region between the Eocene and Miocene.Sulfide inclusions are more abundant in protogranular and porphyroclastic xenoliths relative to equigranular types. In mantle lithologies, sulfide bleb compositions vary between pentlandite and pyrrhotite correlating with the chemistry and texture of the host xenoliths. While sulfides in peridotites are relatively rich in Ni, those in clinopyroxene-rich xenoliths are notably Fe-rich.     

Evolution of North Himalayan gneiss domes: structural and metamorphic studies in Mabja Dome, southern Tibet

Field, structural, and metamorphic petrology investigations of Mabja gneiss dome, southern Tibet, suggest that contractional, extensional, and diapiric processes contributed to the structural evolution and formation of the domal geometry. The dome is cored by migmatites overlain by sillimanite-zone metasedimentary rocks and orthogneiss; metamorphic grade diminishes upsection and is defined by a series of concentric isograds. Evidence for three major deformational events, two older penetrative contractional and extensional events and a younger doming event, is preserved. Metamorphism, migmitization, and emplacement of a leucocratic dike swarm were syntectonic with the extensional event at mid-crustal levels. Metamorphic temperatures and pressures range from 500 °C and 150–450 MPa in chloritoid-zone rocks to 705±65 °C and 820±100 MPa in sillimanite-zone rocks. We suggest that adiabatic decompression during extensional collapse contributed to development of migmatites. Diapiric rise of low density migmatites was the driving force, at least in part, for the development of the domal geometry. The structural and metamorphic histories documented in Mabja Dome are similar to Kangmar Dome, suggesting widespread occurrence of these events throughout southern Tibet.     

张北6.2级地震地温短临异常特征

张北地震前４０天左右,在距该震中１００－２００ｋｍ的河北阳原三马坊、北京塔院和延庆五里营地温测点先后出现典型地温短临异常,异常幅度为０．００１－０．０１℃,据此作了一定程度的预报姑震级和震中距相近的条件下,三马坊测点在张北地震前的地温异常变化幅度仅为大同阳高地震前的１／１０,这可能与构造条件有关。在该地震的映震范围内有关兆反应的地温测点所占比比例为２７％。