垂向裂隙各向异性煤层地震波响应

煤层中存在的裂隙会导致介质表现为各向异性,本文以HTI型煤层为例,结合各向异性介质弹性矩阵和各向异性裂隙理论,推导出不同充填物的垂直裂隙中各向异性参数表达式,将其应用于地震波响应分析;通过改进的交错网格差分法和各向异性Christoffel方程波场分解法,得到地震波合成记录和分解后的P波和SV波记录;将Thomsen群速度与相速度公式,经过坐标轴旋转变换,得到HTI型煤层中不同各向异性参数的地震波速度响应表达式;建立不同类型煤层地质模型,分析了裂隙密度、裂隙充填物以及煤层厚度等参数变化时的地震波响应特征.研究结果为分析垂向裂隙各向异性薄煤层地震波传播规律提供工具,为选用相应地震数据进行地震波各向异性参数反演提供依据.

     

对水压致裂法测得的应力结果之重新估价

本文讨论了水压致裂进行的绝对应力测量结果的可靠性,指出目前水压致裂法是深部绝对应力测量的较好方法。但应用现在通用的资料处理方法时,它可能给出偏小的最大水平主应力SH和偏大的最小水平主应力Shi特别是两个水平主应力差别较大的地区,这个偏差更加显著。以这样的数据,按照库伦强度准则和Byerlee定律去估价地区稳定性,易于得出与事实不符的结论。本文指出了造成上述测量误差的可能原因,并提出了降低测量误差,改进计算结果的办法。     

岩石破裂时电磁辐射的机理研究

本文提出了岩石破裂时的电磁辐射是裂纹尖端电荷随着裂纹加速扩展运动所产生的假说.应用断裂力学方法推导了岩石破裂时初始裂纹长度与裂纹扩展加速度的关系,并计算了其速度和加速度值.根据破裂岩石的电子发射理论,解释了裂纹尖端带电荷的现象.利用岩石在单轴压缩致裂过程中记录到的近场电磁辐射的实验结果,计算了裂纹扩展时裂纹尖端的电荷量和远场电磁辐射强度.通过对电磁辐射波谱分析的研究,得到岩石破裂时电磁辐射频率上限的估计值.最后对岩石破裂时出现的声光电磁现象在理论上作了统一的定性的解释.     

南阳盆地膨胀土裂隙的特征

本文在南水北调中线工程总干渠多年勘察研究的基础上,总结了南阳盆地膨胀土裂隙的类型、基本特征以及开挖边坡浅层裂隙的发展趋势及其对边坡稳定性的影响。     

Damage identification in a ship’s structure using neural networks

Visual inspection of large and complex structures such as a ship is difficult and costly due to problems of accessibility. In this paper, a neural network technique is developed for identifying the damage occurrence in the side shell of a ship’s structure. The side shell is modeled as a stiffened plate. The input to the network is the autocorrelation function of the vibration response of the structure. The response was obtained using a finite element model of the structure. The output is a single function , which was formed by adding together the damping and a part of the restoring forces. The function is used to identify not only the damage occurrence in the model but also its extent and location. The results show that the method presented in this work is successful in identifying the occurrence of damage. The detection of the extent and location of damage is promising, however, more work has to be done in this area.     

Influence of crack surface friction on crack initiation and propagation: A numerical investigation based on extended finite element method

Rock strengths are directly influenced by the open or closed flaws widely distributed in rock masses. Extensive studies have been conducted on the propagations of open flaws in rocks. However, few concerns are paid on the propagation of closed flaws, the influence of the surface friction on the initiation and propagation of closed flaws should be investigated systematically. In present article, the crack initiation and propagation in rock like material subjected to compressive loads have been investigated. The effects of crack surface friction on crack initiation and propagation have been quantified with the help from extended finite element method which is efficient and accurate. Based on the analysis on stress distribution and propagation patterns, following results are obtained: Firstly, minor effects are exerted by crack surface friction on the stress distribution around the flaws when the flaws inclination angle is 30° and 45°. However, as the inclination angle increases to 60°, the effects are much more significant. Secondly, as the inclination angle ranges from 30° to 60°, the most favorable angle for crack propagation is 45°. Thirdly, the initiation location and angle of the wing cracks will not be influenced by the frictions. However, the propagation length will be greatly influenced by the friction and the inclination angle.     

1976年唐山7.8级地震震源过程的研究

本文提出唐山菱形块体在压缩载荷作用下震前应变积累和震时破裂滑动与稳定扩展的一个离散裂纹模型,它包括裂纹面的摩擦滑动和裂纹尖端稳定扩展两个过程。模型采用有限单元技术计算裂纹面的应力和变形及裂纹尖端的应力强度因子,并用库伦-纳维准则判断裂纹面是否发生摩擦滑动及用最大周向拉应力准则判断裂纹尖端扩展方向。模型预测与野外观测资料对比指出:裂纹模型能很好的表示1976年唐山地震震前积累和震时破裂传播的过程     

Microstructural weathering of sedimentary rocks by freeze–thaw cycles: Experimental study of state and transfer parameters

The frost sensitivity of a rock is resulting from the combined action of processes linked to porous network characteristics (state parameters) and to the way water flows into this porous network (transfer parameters), our study was thus about the influence of these parameters on frost weathering of rocks. Sedimentary rocks often found on buildings (limestone and sandstone) and consequently submitted to temperature variations have been selected. State and transfer parameters have been measured for sample characterization and the follow-up of weathering during freeze–thaw cycles. The coupled influence of a state parameter (dynamic modulus of elasticity) and a transfer parameter (water permeability), i.e. between rock skeletal strength and voids connection, has thus been discussed.     

基于时频分析的裂纹转子碰摩故障特征研究

为研究转子系统耦合故障特性,采用有限元方法建立了含有横向裂纹、转静碰摩的非线性转子动力学模型。首先研究了不同转速下裂纹、碰摩单一故障下转子系统的振动响应,其次研究了两种故障耦合情况下系统的振动响应特征。采用波形图、FFT谱图、瞬时频率和Hilbert-Huang时频谱(HHS)相结合的方法对故障转子振动信号进行了分析。分析结果表明:运用多种时频分析相结合的方法可以较为全面地了解转子的故障特征,裂纹转子在1/5、1/3临界转速时会发生较为明显的5X、3X谐波,且裂纹的产生会导致响应幅值增大,从而引起更为严重的碰摩。      

Physics of Seismic Source Ⅱ. Mechanics of Seismic Source

An earthquake is regarded as a fracture from the viewpoint of continuum mechanics, in which stress and strain play key roles in understanding the nature of a seismic source. This review briefly outlines the mechanics of a seismic source in terms of the dislocation model and crack model. The introduction includes the Coulomb failure criterion, static stress drop, dynamic stress drop, the Griffith criterion, and the scaling of source parameters. The selection of topics in the introduction emphasizes the application of seismic data, i.e., in practice, the mechanical parameters introduced here are measurable in the interpretation and analysis of seismic waveform data.