海拉尔盆地贝尔凹陷的油气运聚分析

海拉尔盆地贝尔凹陷是一个以白垩系沉积为主的陆相断陷区。采用条件分析法,对贝尔凹陷的油气运聚条件及其成藏的基本模式进行了系统研究,认为,贝尔凹陷在剖面上有3套成藏组合,其中中部成藏组合最佳;在平面上可分为5个运聚系统,其中以位于凹陷西北部的3个系统为最佳。该凹陷不同构造部位的运聚条件相差较大,生烃洼陷深部位的油气运移以砂岩储集层和断裂为主要输导通道,构造高部位的油气运移以断裂为主,而两者之间的油气输导则以不整合面和断裂为主。在油气运聚和成藏模式分析的基础上,认为贝尔凹陷油气运聚的有利条件主要包括生油凹陷有充足的油源、生油区内有继承性发育的圈闭构造以及各运聚要素间存在良好的时空配置关系3个方面。     

静力触探中土层界面效应试验研究

根据成层土模型试验结果,对静力触探中土层面效应进行试验研究和机理分析,取得了成层土界面效应的规律性,为利用静力触探划分土层提供了理论和实践依据。     

Lateral tidal mixing in the Antarctic marginal seas

Tidal mixing plays an important role in the modification of dense water masses around the Antarctic continent. In addition to the vertical (diapycnal) mixing in the near-bottom layers, lateral mixing can also be of relevance in some areas. A numerical tide simulation shows that lateral tidal mixing is not uniformly distributed along the shelf break. In particular, strong mixing occurs all along the Ross Sea and Southern Weddell Sea shelf breaks, while other regions (e.g., the western Weddell Sea) are relatively quiet. The latter regions correspond surprisingly well to areas where indications for cross-shelf exchange of dense water masses have been found. The results suggest that lateral tidal mixing may account for the relatively small contribution of Ross Sea dense water masses to Antarctic Bottom Water.     

深圳市1 km高分辨率厘米级高精度大地水准面的确定

利用65个精度优于2 cm的GPS水准数据、5 213个实测重力点数据、100 m分辨率的数字地形模型和WDM94地球重力场模型,采用移去-恢复技术计算了深圳市1 km分辨率的大地水准面模型.将该模型大地水准面高与由29个GPS水准得到的大地水准面高进行比较,其差值的标准差为±1.4 cm.     

利用GPS组合观测值建立区域电离层模型研究

介绍了VTEC模型的基本原理，给出了三种利用载波相位观测值改善伪距观测值精度的方法，利用三种组合观测值分别建立VTEC模型，并与利用伪距观测值计算的VTEC模型的精度进行比较。     

无验潮模式下的GPS水下地形测量技术

传统的水下地形测量模式定型于利用GPS测定水底点的平面位置,利用测深仪测定水底点的深度,附之以瞬时潮位资料,获得点位的高程。这种模式在上述条件具备的情况下,可取得完满的结果。但当验潮条件不具备时,该模式将不能获得测点的高程。为了弥补这一缺陷,简化工作流程,提高水下地形测量的精度,本文提出了一种无验潮模式下的水下地形测量思想,该思想不用专门测定潮位,而直接利用GPS的RTK测量技术,辅之以姿态测量和补偿,从而获得高精度的水底点高程。该方法被验证是正确的,希望进一步推广应用。     

Stepwise Conditional Transformation for Simulation of Multiple Variables

Most geostatistical studies consider multiple-related variables. These relationships often show complex features such as nonlinearity, heteroscedasticity, and mineralogical or other constraints. These features are not handled by the well-established Gaussian simulation techniques. Earth science variables are rarely Gaussian. Transformation or anamorphosis techniques make each variable univariate Gaussian, but do not enforce bivariate or higher order Gaussianity. The stepwise conditional transformation technique is proposed to transform multiple variables to be univariate Gaussian and multivariate Gaussian with no cross correlation. This makes it remarkably easy to simulate multiple variables with arbitrarily complex relationships: (1) transform the multiple variables, (2) perform independent Gaussian simulation on the transformed variables, and (3) back transform to the original variables. The back transformation enforces reproduction of the original complex features. The methodology and underlying assumptions are explained. Several petroleum and mining examples are used to show features of the transformation and implementation details.     

Disjunctive Kriging with Hard and Imprecise Data

This paper presents a methodology for assessing local probability distributions by disjunctive kriging when the available data set contains some imprecise measurements, like noisy or soft information or interval constraints. The basic idea consists in replacing the set of imprecise data by a set of pseudohard data simulated from their posterior distribution; an iterative algorithm based on the Gibbs sampler is proposed to achieve such a simulation step. The whole procedure is repeated many times and the final result is the average of the disjunctive kriging estimates computed from each simulated data set. Being data-independent, the kriging weights need to be calculated only once, which enables fast computing. The simulation procedure requires encoding each datum as a pre-posterior distribution and assuming a Markov property to allow the updating of pre-posterior distributions into posterior ones. Although it suffers some imperfections, disjunctive kriging turns out to be a much more flexible approach than conditional expectation, because of the vast class of models that allows its computation, namely isofactorial models.     

Atomistic simulation of the structure and elastic properties of pyrite (FeS2) as a function of pressure

Interatomic potential parameters have been derived at simulated temperatures of 0 K and 300 K to model pyrite FeS₂. The predicted pyrite structures are within 1% of those determined experimentally, while the calculated bulk modulus is within 7%. The model is also able to simulate the properties of marcasite, even though no data for this phase were included in the fitting procedure. There is almost no difference in results obtained for pyrite using the two potential sets; however, when used to model FeS₂ marcasite, the potential fitted at 0 K performs better. The potentials have also been used to study the high-pressure behaviour of pyrite up to 44 GPa. The calculated equation of state gives good agreement with experiment and shows that the Fe–S bonds shorten more rapidly that the S–S dimer bonds. The behaviour of marcasite at high pressure is found to be similar to that of pyrite.     

俯伪斜分段密集采煤法三维有限元数值模拟研究

俯伪斜分段密集采煤法,作为一种较新的采煤方法,在我国技术上还不很成熟,因此,首次针对京煤集团木城涧矿大台井的地质条件和赋煤状况,通过简化建立三维立体有限元模型,模拟计算了该矿煤层顶底板在开采前后运动变化情况。结果表明:煤层倾角、推采距离和开采巷道数三者是影响煤层顶底板运动规律的重要因素,得到了表征顶底板运动规律的顶底板法向最大应力和法向最大位移与三影响因素关系曲线,详细阐述了三影响因素下的煤层顶底板运动规律;同时,对现场开采中支撑压力大小,特别是在三影响因素下,超前支撑压力的作用范围与应力峰值位置进行了数值计算,并总结了其影响规律;最后,指出了该数值分析方法对现场开采将具有十分重要的应用价值和指导意义。