‘A Case Study on a Polar Cold Air Outbreak over Fram Strait using a Mesoscale Weather Prediction Model’

The mesoscale weather prediction model ’Lokal-Modell’ (LM) of the Deutscher Wetterdienst is applied to the situation of an Arctic cold air outbreak in the Fram Strait region in April 1998. Observations are available from a flight along 5⁰E carried out during the ARTIST campaign. Initial and time-dependent boundary data for the simulation are taken from a larger scale operational model system. Using the standard configuration of LM, the simulation reproduced the propagation of cold air and the characteristic structure of the atmospheric boundary layer (ABL) in fair agreement with the observations. However, a detailed comparison revealed three basic problems. Firstly, there is evidence that the available data on sea-ice conditions were insufficient approximations to the true state for several reasons. A modification of the sea-ice data towards observations revealed that parts of the discrepancies were due to the original sea-ice data. Secondly, a control run with the model in its standard configuration shows an insufficient warming of the ABL downstream of the ice edge due to underestimation of surface heat fluxes. A simple modification of the approach for the scalar roughness length resulted in the strongest benefit, while comparative studies showed only a slight sensitivity to different types of parametrisation of turbulent mixing or the inclusion of an additional moist convection parametrisation. Thirdly, in all the simulations the deepening of the convective ABL downstream of the ice edge is weaker than observed. This may be partly due to the thermal stratification above the ABL in the analysis data, which is more stable than observed; but it may also be a hint to the fact that processes near the inversion are insufficiently parametrised in mesoscale models with resolutions as used in LM. The simulated cloud layer in the convective ABL is similar to that observed with respect to condensate content, a sharply defined cloud top, a diffuse lower bound, and continuous light precipitation.     

A Parameterization of Third-order Moments for the Dry Convective Boundary Layer

We describe one-dimensional (1D) simulations of the countergradient zone of mean potential temperature observed in the convective boundary layer (CBL). The method takes into account the third-order moments (TOMs) in a turbulent scheme of relatively low order, using the turbulent kinetic energy equation but without prognostic equations for other second-order moments. The countergradient term is formally linked to the third-order moments and , and a simple parameterization of these TOMs is proposed. It is validated for several cases of a dry CBL, using large-eddy simulations that have been realized from the MESO-NH model. The analysis of the simulations shows that TOMs are responsible for the inversion of the sign of in the higher part of the CBL, and budget analysis shows that the main terms responsible for turbulent fluxes and variances are now well reproduced.     

山东一次区域性暴雨中尺度特征分析

利用常规资料、地面自动站资料、FY2C卫星云图TBB和多普勒天气雷达资料,对2009年5月9—10日发生在山东的春季区域性暴雨进行分析和研究。结果表明:①强降水是在低层冷空气和深厚西南暖湿气流交汇的过程中产生的,副高异常偏强,制约850～700hPa切变线和地面辐合线停滞少动,产生较长时间的降水。②地面辐合线的形成和维持激发了边界层的辐合上升运动,为暴雨区提供了充足的水汽,冷空气从边界层楔入,与暖湿气流汇合并抬升暖湿气流辐合上升,使上升运动加强,降水增幅。③中尺度对流系统是造成暴雨的主要中尺度系统,多个单体更迭并移经同一区域,形成"列车效应"而产生区域性暴雨。④雷达径向速度图中逆风区和不同高度(超)低空急流的大小对短时强降水预报有一定的指示意义。     

测绘卫星的姿态控制技术

通过分析测绘卫星的姿态控制要求, 研究了卫星姿态控制所涉及的主要误差源, 提出了相应的解决措施, 针对测绘卫星的需求进行了姿态控制系统方案设计。     

Wave-dependence of friction velocity,roughness length,and drag coefficient over coastal and open water surfaces by using three databases

The parameterization of friction velocity, roughness length, and the drag coefficient over coastal zones and open water surfaces enables us to better understand the physical processes of air-water interaction. In context of measurements from the Humidity Exchange over the Sea Main Experiment (HEXMAX), we recently proposed wave-parameter dependent approaches to sea surface friction velocity and the aerodynamic roughness by using the dimensional analysis method. To extend the application of these approaches to a range of natural surface conditions, the present study is to assess this approach by using both coastal shallow (RASEX) and open water surface measurements (Lake Ontario and Grand Banks ERS-1 SAR) where wind speeds were greater than 6.44 m s^-1. Friction velocities, the surface aerodynamic roughness, and the neutral drag coefficient estimated by these approaches under moderate wind conditions were compared with the measurements mentioned above. Results showed that the coefficients in these approaches for coastal shallow water surface differ from those for open water surfaces, and that the aerodynamic roughness length in terms of wave age or significant wave height should be treated differently for coastal shallow and open water surfaces.     

RegCM3模式对青藏高原温度和降水的模拟及检验

为了检验RegCM3区域气候模式对青藏高原地区的模拟能力,利用NCEP再分析资料和观测站点资料,采用三种不同的对流参数化方案,对青藏高原地区2006年夏季进行了模拟分析,并重点对温度和降水进行了细致的检验。结果表明：模式能较好地再现青藏高原地区大尺度的环流特征,具有对青藏高原地区的温度和降水分布特征的模拟能力;对于量值的模拟,三种对流参数化方案均模拟出了与实况温度一致的变化趋势,但均存在5~6 ℃的冷偏差;Grell方案模拟的降水量均大于实况,Kuo-Anthes方案对于高原地区的降水量的模拟较为接近于实况,但模式对降水量的模拟能力仍有待进一步提高。     

背景场资料与参数化方案对暴雨预报的影响

利用GRAPES—meso模式和T213资料,对2007年7月18日发生在我国四川盆地和华东地区一次大暴雨过程进行多组数值试验,以分析侧边界资料、驱动资料的垂直分辨率、模式积分区域、云物理参数及边界参数对GRAPES—nleso模式降水预报影响。试验结果表明：（1）侧边界资料对模式降水预报结果影响较小,驱动GRAPES—meso的全球模式产品质量提高,降水预报结果越好;（2）驱动资料垂直分辨率的高低对降水预报结果影响较大,分辨率越高,预报能力越强,反之越弱;（3）模式积分区域对降水预报结果也有明显影响,区域越大,降水预报未必总是最好;（4）物理过程和边界参数试验表明,WSM6方案与KFeta方案组合的24小时降水预报与实况更接近。     

Influences of Two Convective Schemes on the Radiative Energy Budget in GAMIL1.0

The Grid-point Atmospheric Model of IAP LASG version 1.0 (GAMIL1.0) is used to investigate the impacts of different convective schemes on the radiative energy budget.The two convective schemes are Zhang and McFarlance (1995)/Hack (1994) (ZM) and Tiedtke (1989)/Nordeng (1994) (TN).Two simulations are performed:one with the ZM scheme (EX_ZM) and the other with the TN scheme (EX_TN).The results indicate that during the convective process,more water vapor consumption and temperature increment are found in the EX_ZM,especially in the lower model layer,its environment is therefore very dry.In contrast,there is a moister atmosphere in the EX_TN,which favors low cloud formation and large-scale condensation,and hence more low cloud fraction,higher cloud water mixing ratio,and deeper cloud extinction optical depth are simulated,reflecting more solar radiative flux in the EX_TN.This explains why the TN scheme underestimates the net shortwave radiative flux at the top of the atmosphere and at surface.In addition,convection influences longwave radiation,surface sensible and latent heat fluxes through changes in cloud emissivity and precipitation.     

Application of Dynamic Subgrid-scale Models for Large-eddy Simulation of the Daytime Convective Boundary Layer over Heterogeneous Surfaces

The sensitivity of large-eddy simulation (LES) to the representation of subgrid-scale (SGS) processes is explored for the case of the convective boundary layer (CBL) developing over surfaces with varying degrees of spatial heterogeneity. Three representations of SGS processes are explored: the traditional constant Smagorinsky–Lilly model and two other dynamic models with Lagrangian averaging approaches to calculate the Smagorinsky coefficient (C _S ) and SGS Prandtl number (Pr). With initial data based roughly on the observed meteorology, simulations of daytime CBL growth are performed over surfaces with characteristics (i.e. fluxes and roughness) ranging from homogeneous, to striped heterogeneity, to a realistic representation of heterogeneity as derived from a recent field study. In both idealized tests and the realistic case, SGS sensitivities are mostly manifest near the surface and entrainment zone. However, unlike simulations over complex domains or under neutral or stable conditions, these differences for the CBL simulation, where large eddies dominate, are not significant enough to distinguish the performance of the different SGS models, irrespective of surface heterogeneity.