不同仪器烈度算法在四川地区 历次地震中的比较应用

强震观测资料包括强震动时程记录资料和宏观震害调查资料两大类, 前者是定量的微观数据, 后者则是定性的宏观指标. 本文明晰给出了微观仪器烈度与宏观仪器烈度、 微观考察烈度与宏观考察烈度的概念, 并在此基础上提出了只有在宏观仪器烈度与宏观考察烈度之间进行比较才具有实质性的意义;同时对国内外常见的仪器烈度算法进行了比较性研究, 得出了袁一凡仪器烈度算法可靠性更高的结论;最后以四川地区历年来重要震例的强震动记录为依据, 对修正的袁一凡仪器烈度算法的可靠性进行了比较应用. 结果表明, 对袁一凡仪器烈度算法修正与扩展的应用是可行的, 同时也验证了将微观仪器烈度与宏观考察烈度直接进行比较会存在较大的差距.      

辽宁地区长周期地震动灾害预测及防灾对策

减轻长周期地震动灾害是城市防震减灾面临的新课题。本文在分析长周期地震动灾害产生条件的基础上,对辽宁地区的地震环境、长周期地震波的传播途径及地基条件作了分析,认为在下辽河平原及周边地区城市有产生长周期地震动灾害的可能,文章最后提出了防治和减轻长周期地震动灾害的对策。     

DATA COMPARATIVE ANALYSIS BETWEEN SFM DATA AND DGPS DATA: A CASE STUDY FROM FAULT SCARP IN THE EAST BANK OF HONGSHUIBA RIVER,NORTHERN MARGIN OF THE QILIAN SHAN

With the development of the techniques acquiring high-resolution digital terrain data,the digital terrain data acquisition technology has been widespread applied to the geoscience research.A revolutionary,low-cost and simply operative SfM (Structure from Motion) technology will make obtain high-resolution DEM data more convenient for researches on active tectonics.This paper summarizes the basic principles and workflows of SfM technology and processes and selects the Hongshuiba River area along the northern margin of the Qilian Shan to conduct data collection.We use a series of digital pictures to produce a texture with geographic information,in which data resolution is 6.73cm/pix and average density of point cloud is 220.667 point/m².The coverage area is 0.286km².Further,in order to compare the accuracy between SfM data and differential GPS (DGPS) data in details,SfM data are vertically shifted and tilt-corrected.After optimizing corrections of SfM data,the absolute value of elevation difference between two data substantially concentrates around 20cm,roughly equivalent to 2-folds of data error only after the elevation error correction.Elevation difference between two data is 10~15cm in 90% confidence interval.The maximum error is about 30cm,but accounts for less than 10%.Along the direction of fault trace,the height of fault scarp extracted from SfM data shows that vertical displacement of the latest tectonic activity in the east bank of Hongshuiba River is about 1m,and some minimum scarps height may be 0.3m.The results show SfM technology with high vertical accuracy can be able to replace differential GPS in high-precision topographic survey.After correcting of SfM data,elevation difference still exists,which may be associated with methods of generating DEM and SfM data accuracy,which in turn is controlled by the number and distribution of Ground Control Points (GCPs),photos density and camera shooting height,but also related to surface features,Fodongmiao-Hongyazi Fault     

Predicting the equilibrium bed slope in natural streams using a stochastic model for incipient sediment motion

In this paper, a method to predict the equilibrium bed slope in natural streams based on the incipient motion criterion is proposed. The method is based on the criterion suggested by Gessler to simulate the grain size distribution of the armour coat using the concept of critical shear stress of a sediment mixture. In particular, a different expression of the probability for a single particle size to be part of the armour coat is firstly proposed; then, a simple two‐steps criterion is suggested to estimate the safety factor required by the proposed approach. The method is applied in three different Italian regions (Calabria, Basilicata, and Tuscany) and required several field campaigns involving the survey of 251 stream reaches upstream of grade‐control structures. The area including five Calabrian streams is firstly used to test the suitability of the two‐steps approach. In this area, considering the detailed information about the particle size of bed material, the effect of using a simplified grain size distribution for each torrent is also checked. The method is then applied within the two additional areas (Basilicata and Tuscany) in order to check the geographic influence on the prediction of the stable longitudinal profile. A comparison between measured and estimated values of the equilibrium bed slope showed a good agreement for the Calabrian streams, where the number of the investigated stream reaches is greater, and satisfactory results for the torrents located in Basilicata and Tuscany where the field data set is more limited. The overall results encourage the extension of the proposed method to additional field data and suggest the use of this approach by hydraulic designers in order to stabilize the longitudinal profile of natural streams. Copyright © 2011 John Wiley & Sons, Ltd.     

Strong ground motion record selection for the reliable prediction of the mean seismic collapse capacity of a structure group

How to select a limited number of strong ground motion records (SGMRs) is an important challenge for the seismic collapse capacity assessment of structures. The collapse capacity is considered as the ground motion intensity measure corresponding to the drift‐related dynamic instability in the structural system. The goal of this paper is to select, from a general set of SGMRs, a small number of subsets such that each can be used for the reliable prediction of the mean collapse capacity of a particular group of structures, i.e. of single degree‐of‐freedom systems with a typical behaviour range. In order to achieve this goal, multivariate statistical analysis is first applied, to determine what degree of similarity exists between each selected small subset and the general set of SGMRs. Principal Component analysis is applied to identify the best way to group structures, resulting in a minimum number of SGMRs in a proposed subset. The structures were classified into six groups, and for each group a subset of eight SGMRs has been proposed. The methodology has been validated by analysing a first‐mode‐dominated three‐storey‐reinforced concrete structure by means of the proposed subsets, as well as the general set of SGMRs. The results of this analysis show that the mean seismic collapse capacity can be predicted by the proposed subsets with less dispersion than by the recently developed improved approach, which is based on scaling the response spectra of the records to match the conditional mean spectrum. Copyright © 2010 John Wiley & Sons, Ltd.     

Analysis of buried pipelines subjected to reverse fault motion

Presently available simplified analytical methods and semi-empirical methods for the analysis of buried pipelines subjected to fault motion are suitable only for the strike-slip and the normal-slip type fault motions, and cannot be used for the reverse fault crossing case. A simple finite element model, which uses beam elements for the pipeline and discrete nonlinear springs for the soil, has been proposed to analyse buried pipeline subjected to reverse fault motion. The material nonlinearities associated with pipe-material and soil, and geometric nonlinearity associated with large deformations were incorporated in the analysis. Complex reverse fault motion was simulated using suitable constraints between pipe-nodes and ground ends of the soil spring. Results of the parametric study suggest that the pipeline's capacity to accommodate reverse fault offset can be increased significantly by choosing a near-parallel orientation in plan with respect to the fault line. Further improvement in the response of the pipeline is possible by adopting loose backfill, smooth and hard surface coating, and shallow burial depth in the fault crossing region. For normal or near normal orientations, pipeline is expected to fail due to beam buckling at very small fault offsets.     

Inelastic displacement demands in steel structures and their relationship with earthquake frequency content parameters

This paper deals with the estimation of peak inelastic displacements of SDOF systems, representative of typical steel structures, under constant relative strength scenarios. Mean inelastic deformation demands on bilinear systems (simulating moment resisting frames) are considered as the basis for comparative purposes. Additional SDOF models representing partially‐restrained and concentrically‐braced (CB) frames are introduced and employed to assess the influence of different force‐displacement relationships on peak inelastic displacement ratios. The studies presented in this paper illustrate that the ratio between the overall yield strength and the strength during pinching intervals is the main factor governing the inelastic deformations of partially‐restrained models and leading to significant differences when compared with predictions based on bilinear structures, especially in the short‐period range. It is also shown that the response of CB systems can differ significantly from other pinching models when subjected to low or moderate levels of seismic demand, highlighting the necessity of employing dedicated models for studying the response of CB structures. Particular attention is also given to the influence of a number of scalar parameters that characterise the frequency content of the ground motion on the estimated peak displacement ratios. The relative merits of using the average spectral period T_aver, mean period T_m, predominant period T_g, characteristic period T_c and smoothed spectral predominant period T_o of the earthquake ground motion, are assessed. This paper demonstrates that the predominant period, defined as the period at which the input energy is maximum throughout the period range, is the most suitable frequency content scalar parameter for reducing the variability in displacement estimations. Finally, noniterative equivalent linearisation expressions based on the secant period and equivalent damping ratios are presented and verified for the prediction of peak deformation demands in steel structures. Copyright © 2011 John Wiley & Sons, Ltd.     

Enrichment of seismic ground motion databases using Karhunen–Loève expansion

Best estimate seismic analysis are generally based on time‐domain simulations of structural responses. The seismic load is then modeled by a stochastic process representing ground motion. For this purpose, the analyst can use recorded accelerograms or work with synthetically generated ones. The number of ground motion time‐histories available for a given scenario and site condition is limited and generally not sufficient for carrying out more advanced probabilistic structural response analysis. It is then necessary to have at our disposal methods that allow for generating synthetic accelerograms that realistically characterize earthquake ground motions. However, most of the methods proposed in literature for generating synthetic accelerograms do not accurately reproduce the natural variability of ground motion parameters (such as PGA, cumulative absolute velocity, and Arias intensity) observed for recorded time histories. In this paper, we introduce a new method for generating synthetic ground motion, based on Karhunen‐Loève decomposition and a non‐Gaussian stochastic model. The proposed method enables the structural analyst to simulate ground motion time histories featuring the properties mentioned above. To demonstrate its capability, we study the influence of the simulation method on different ground motion parameters and on soil response spectra. We finally compute fragility curves to illustrate the practical application of the proposed method. Copyright © 2012 John Wiley & Sons, Ltd.     

Variation of earthquake ground motionwith depth

Introduction The 21st century is the time for the exploitation and utilization of underground spaces. It is astrategic way to defeat the severe challenge that human are now confronting with, such as the lackof land, contamination of environment, traffic jam, waste of sources, and so on. The exploitationand utilization of underground space has become a global tendency, and a significant sign inevaluating the speed of modernization of cities. Facing the challenge, it is significantly necess…     

Real-time simulation of ground displacement by digital accelerograph record

Introduction The observation records of strong ground motion previously, on the one hand, supplied basicdata both to research on earthquake engineering and to constitute the criterion of aseismatic de-signing of all project structures; on the other hand, it provided important information for the re-search on the process of epicenter burst in seismology. With the development of research on strongground motion observation, especially the development of the new generation accelerograph,which…