龙首二级面板堆石坝三维真非线性地震反应分析和评价

基于土石料三维粘弹塑性动力本构模型,并采用新型三维各向异性有厚度薄单元来模拟面板和堆石的接触面特性,建立了高面板堆石坝地震反应分析的三维真非线性动力分析方法.利用坝料动力特性的大型三轴试验成果,分析计算了龙首二级(西流水)面板堆石坝的地震反应,主要包括加速度反应、堆石体应力反应及坝体单元抗震安全系数、面板应力反应和变形及接缝位移、高趾墙动力反应等.为大坝的抗震设计提供了有力的技术依据.     

The impact of hydrological changes on travertine deposits related to thermal springs in the Pamukkale area (SW Turkey)

Pamukkale thermal waters (35 °C), exhibiting calcium-bicarbonate-sulfate composition and high carbon dioxide concentration, are of a predominantly meteoric origin. The meteoric fluid, circulating through faults and fractures, is heated by magmatic intrusions at great depth, and ascends from deep reservoirs to the surface. Mixing with relatively cold groundwater in the near surface zone promotes different saturation conditions with respect to calcium carbonate that later precipitates at depth and/or the surface. Dissolution-deposition processes of calcium carbonate both at surface and depth environments may help to reconstruct past climate direction in the field. During wet climate conditions a high-rate of calcium carbonate accumulation would be expected to occur at the surface because thermal fluid would be under-saturated with respect to calcium carbonate at depth because of a relatively higher mixing ratio with cold groundwater. During dry climate conditions the thermal fluid would be super-saturated at depth because of the highly acidic environment. Hydrometeorological studies reveal that the annual precipitation at the Pamukkale hydrothermal field tends to decrease with time. This climatic change in the area was also detected from geological records. While humid climate conditions prevailed during the late Quaternary, the area has recently been affected by arid/semi-arid climate conditions, followed by some episodic transitions. This study has shown how the system has possibly reacted to different climate conditions since antiquity.     

Discrimination between climate and human-induced dryland degradation

In this study we present a technique to discriminate between climate or human-induced dryland degradation, based on evaluations of AVHRR NDVI data and rainfall data. Since dryland areas typically have high inter-annual rainfall variations and rainfall has a dominant role in determining vegetation growth, minor biomass trends imposed by human influences are difficult to verify. By performing many linear regression calculations between different periods of accumulated precipitation and the annual NDVI_max, we identify the rainfall period that is best related to the NDVI_max and by this the proportion of biomass triggered by rainfall. Positive or negative deviations in biomass from this relationship, expressed in the residuals, are interpreted as human-induced. We discuss several approaches that use either a temporally fixed NDVI peaking time or an absolute one, a best mean rainfall period for the entire drylands or the best rainfall period for each individual pixel. Advantages and disadvantages of either approach or one of its combinations for discriminating between climate and human-induced degradation are discussed. Depending on the particular land-use either method has advantages. To locate areas with a high likelihood of human-induced degradation we therefore recommend combining results from each approach.     

A 3D BEM-FEM methodology for simulation of high speed train induced vibrations

This work presents an efficient methodology for the analysis of vibrations in a railroad track system, induced by the passage of conventional and high-speed trains. To this end the Boundary Element Method is used to model the soil-tie system within the framework of impulse response techniques. Conventional Finite Element Methods along with Newmark's integration is used for the modeling of the rail system. The two methods are coupled at the tie-rail interface and the solution is obtained following a staggered, time marching scheme in an efficient manner. The methodology accounts for Soil-Structure Interaction and traveling wave effects. In addition, this work identifies the parameters that affect the efficient modeling of railroad track systems as they pertain to the proposed solution methodology.     

Computation of response spectra from mining tremors using neural networks

Underground coal and copper ore exploitation in two Polish mining regions causes mining tremors and a series of other negative phenomena in the environment. Although these tremors are strictly connected with human activity, they differ considerably from other paraseismic vibrations. The moment of their occurrence is not to be foreseen likewise for earthquakes. The main problem discussed in the paper was formulated as the neural network evaluation of a relation between mining tremor energies, epicentral distances and acceleration response spectra. Back-propagation neural networks with Resilient back-propagation learning method were used. Each input vector included information about the mining tremor energy and the epicentral distance. Values of acceleration response spectrum were expected as the outputs of neural networks. Neurally evaluated spectra were compared with spectra computed on the basis of experimental data. After the network is trained and tested, it can be used for mapping of new data of mining tremor energies and epicentral distances into the spectra. Then, what is the substantial advantage of neural approach, the prediction of acceleration response spectra can be performed without recording of surface vibrations. In the light of the results, it is visible that the presented way of computation of acceleration response spectra can be peculiarly applied to prognosis of mining tremors influences on structures.     

云南宁蒗地震应急对策与探讨

0引言1998年8月至2000年1月在云南省丽江地区宁蒗县境内先后发生13次4~6.2级地震。这一组强震事件前,丽江行署地震局前方工作组、宁蒗县地震局根据多年的预报经验两次向中国地震局和省地震局填报了临震预报卡,准确判定了各个阶段的震情发展趋势,较成功地实现了对这组地震事件的临震预报。与此同时,向丽江地委、行署、宁蒗县委、县政府等明确提出了地震应急对策措施和建议。震前行署地震局前方工作组到极震区的烂泥箐乡开展了防震减灾科普知识宣传活动,为地方政府和震区的人民群众在震前及时实施各项有效的防震减灾措施奠定了基础,对减少灾区…     

The dependence of response spectrum on the tectonic ambient shear stress field

Introduction The acceleration response spectrum and peak ground acceleration are the necessary and im-portant parameters in earthquake-resistant design at present. They are still active research field. With the increase of digital high accurate strong motion observation data, especially the earth-quakes of Loma Prieta (M=7.0) in 1989; Landers (M=7.3) in 1992; Big Bear (M=6.4) in 1994 and Northridge (M=6.7) in 1994 in USA; Kozani (M=6.6) earthquake and afteshocks in 1995 in Greece; Dinar…     

Pseudo‐dynamic seismic response of reinforced concrete frames infilled with non‐structural brick masonry

This paper presents pseudo‐dynamic test results on the in‐plane seismic behaviour of infilled frames. Thirteen single‐storey, single‐bay, half‐size‐scale, reinforced concrete‐frame specimens, most of which infilled with non‐structural masonry made of perforated bricks and cement mortar are tested. The infills are in contact with frames, without any connector; openings are not covered. The frames are different in their strength and details, reinforcement grade, and aspect ratio. Seismic input is the 1976 Tolmezzo (Friuli, Italy) ground acceleration, to which specimens are subjected two times: virgin and damaged by the previous test. The global seismic response of initially virgin infilled specimens considerably differs from that of bare specimens. This follows a dramatic change of properties: compared to a bare frame, the initial stiffness increases by one order of magnitude, and the peak strength more than doubles. The peak drift lessens; however, the displacement ductility demand does not. The energy demand is greater. Nevertheless, the influence of infill decreases as damage proceeds. Displacement time histories of damaged specimens are quite similar. At the local level, infill causes asymmetry and concentration of the frame deformation. Copyright © 2005 John Wiley & Sons, Ltd.     

Seismic response analysis of multidrum classical columns

This paper presents a numerical investigation on the seismic response of multidrum classical columns. The motivation for this study originates from the need to understand: (a) the level of ground shaking that classical multidrum columns can survive, and (b) the possible advantages or disadvantages of retrofitting multidrum columns with metallic shear links that replace the wooden poles that were installed in ancient times. The numerical study presented in this paper is conducted with the commercially available software Working Model 2D?, which can capture with fidelity the sliding, rocking, and slide‐rocking response of rigid‐body assemblies. This paper validates the software Working Model by comparing selected computed responses with scarce analytical solutions and the results from in‐house numerical codes initially developed at the University of California, Berkeley, to study the seismic response of electrical transformers and heavy laboratory equipment. The study reveals that relative sliding between drums happens even when the g‐value of the ground acceleration is less than the coefficient of friction, µ, of the sliding interfaces and concludes that: (a) typical multidrum classical columns can survive the ground shaking from strong ground motions recorded near the causative faults of earthquakes with magnitudes M_w=6.0–7.4; (b) in most cases multidrum classical columns free to dislocate at the drum interfaces exhibit more controlled seismic response than the monolithic columns with same size and slenderness; (c) the shear strength of the wooden poles has a marginal effect on the sliding response of the drums; and (d) stiff metallic shear links in‐between column drums may have an undesirable role on the seismic stability of classical columns and should be avoided. Copyright © 2005 John Wiley & Sons, Ltd.