Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.     

资源潜力评价中典型矿床与区域矿产编图思路讨论

根据新一轮全国矿产资源潜力评价工作需要,首先按矿产预测类型选择典型矿床编制典型矿床成矿要素图—典型矿床预测要素图—典型矿床成矿模式图和预测模型图,然后再按预测研究工作区范围编制区域地质建造构造矿产图—区域成矿要素图—区域预测要素图—区域成矿模式图和预测模型图.讨论了有关图件的编制思路,并提出了图中突出显示成矿要素和预测要素的方法.     

GIS工作流系统的长事务处理研究

分析了Sagas事务模型及空间数据版本树技术,设计了一种灵活的长事务补偿控制方案,为集成GIS,MIS及OA的工作流系统提供了有力的事务处理技术支持。     

CCSD主孔1113~1600 m花岗质片麻岩单元的变形构造特征

中国大陆科学钻探(CCSD)主孔2000m岩性剖面揭示了1113～1600m花岗质片麻岩段为地表北苏鲁超高压花岗质变质岩剪切构造叠覆岩片中的石湖镇构造岩片的花岗质片麻岩的下延部分。本单元之上下界线为韧性剪切带,内部发育小型韧性剪切变形,仅局部可见旋转碎斑体系等剪切指向标志,以SE向NW的逆冲剪切指向为主,其次为NW向SE的正滑剪切指向,并主要发育于较软弱夹层内,后者成为苏鲁地区存在伸展型穹隆构造的新证据;在1140～1280m岩性段内发育断续、较弱的拉伸线理,拉伸线理总体向SE倾伏,倾伏角为10～36°;花岗质片麻岩单元内部分石英以多晶石英条带的形式存在,花岗质片麻岩主要矿物长石基本没有动态重结晶现象,仅具较弱的形态拉长特征(X∶Z=2左右),总体面理倾向170°E,倾角平均20°,明显不同于其他岩性单元内的面理产状,可能主要代表折返变形之前的近东西向构造,而其他岩性单元受折返变形影响较大,其面理产状主要代表折返阶段形成的NE-NNE向构造;运用电子背散射(EBSD)技术进行石英组构分析并与费氏台测定对比,表明1113～1600m花岗质片麻岩单元经历了中—低温变形,局部残留有高温组构,剪切指向主要为SE向NW的逆冲,其中高温组构与中温组构均显示为SE向NW的逆冲剪切指向,反映折返早期与折返主期岩片的相对剪切方向一     

水中丝爆等离子体破岩机理研究

在隧道开挖、矿山开采等基础工程建设中,岩石爆破技术发挥着重要作用。等离子体碎岩技术具有无污染,破碎过程中无飞石、无有害气体的产生,使用方便,作业效率高,是替代炸药碎岩的最有效可行的方法。本文研究了水中丝爆产生等离子体破碎岩石的机理,分析了高电压脉冲放电过程中的铜丝融化过程,建立了铜丝在各阶段变化的电阻模型,利用MATLAB对不同阶段放电电路的电流进行了数值仿真分析,并与实验得到的电流波形进行对比。研究发现,电流波形,上升沿时间越短,脉冲放电效果越好。铜丝变化产生等离子体的过程中,等离子体通道具有一定的电阻性。实验数据结果与模型数值计算结果基本相符。     

基于多元整体最小二乘优化的多点灰色动态变形分析模型

提出一种多元整体最小二乘优化的多点灰色动态模型,并结合实例验证优化的MGM(1,n)模型的优越性。将优化的MGM(1,n)模型与一般的MGM(1,n)模型进行对比,分析两种模型的建模值和预测值。结果表明,优化的MGM(1,n)模型在建模数据多于4期的情况下建模精度更高,预测精度更准确,更符合实际情况。     

大气重力信号的理论计算及其检测

基于标准大气定律和大气圆柱体分布模型,本文引进了大气重力格林函数,用离散格积方法求得了大气对重力场观测的影响,对台站高程、周围地形和地表温度变化等因素的影响问题进行了讨论．结果说明台站近区气压变化是大气重力信号的主要贡献者,考虑大气质量负荷引起的弹性地球形变效应后,对距台站0．5°的区域积分获得的大气重力导纳值为-0．3603μGal／hPa,占全球大气变化引起的总信号的90％以上,这一理论模型结果与超导重力仪实测结果相吻合,并能较有效地用于消除重力观测中的气压干扰成分．     

Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification

A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd.     

NUMERICAL SIMULATION OF MESOSCALE STRUCTURES OF TYPHOON AND OROGRAPHIC EFFECTS USING MM5*

The track,landfall,dynamic and thermodynamic and cloud-rain physical mesoscale structures and their evolution of typhoon HERB 1996 in 36 h from 0000 UTC 31 July to 1200 UTC 1 August 1996 were simulated by using the non-hydrostatic mesoscale model MM5.This period covered the process of typhoon HERB landfall at Taiwan and Fujian Provinces.Results show that the model successfully simulated the landfall process of typhoon HERB,revealed the most important characteristics of the mesoscale dynamic and thermodynamic and cloud-rain physical structure during its landfall.The simulated typhoon track was close to the observation.The center of cyclonic circulation simulated at 0000 UTC on 1 August 1996 (24 h integration) was located in shore near Fuqing,Fujian Province at which the typhoon was reported to landfall two hours later.It shows that strong upward motion formed by low level convergence existed in the eye-wall and subsidence at the eye.The wind field shows clear asymmetrical structure near the typhoon center.The cloud and rainband was screw-typed distributed around typhoon center,and consisted of meso-β scale rain cores.During the period of typhoon HERB staying near and passing over Taiwan,the lower cloud was developed in the eye region so that the previous clear typhoon eye on the satellite pictures became fuzzy.Observation shows that the typhoon center was "warm",but the model simulations with higher space resolution show that in the mid-troposphere the region of eye-wall with stronger upward motion and more cloud-and rain-water was warmer than the eye.During the period of typhoon passing over Taiwan and its following landfall at Fujian,the track of model typhoon deviated about 30 km northward (i.e.,rightward) because of the orographic effects of Taiwan Island,but the strength of the typhoon was not affected remarkably.The amount of rainfall on Taiwan in the 36 h simulations was enhanced more than six times by the orographic lifting of Taiwan Mountain.     

确定先期固结压力的数学模型法

地基土的先期固结压力是判断土体应力历史的一个指标。在不同应力历史状况的土体变形分析中它也是一个重要的计算参数。因此,方便、准确地确定先期固结压力就显得尤为重要。依据理论研究和试验分析,提出了一种新的确定方法：数学模型法。润扬大桥土样试验的结果证明了此法的可行性。