无人机载线阵摆扫CCD影像几何校正

针对无人机载线阵CCD传感器摆扫成像的技术特点,利用GPS/INS组合导航系统提供的导航遥测数据,对无人机载的线阵摆扫CCD影像建立了严格的成像模型,并设计了详细的几何校正流程。实验结果证实采用文中的成像模型和几何校正流程,可获得正确、高精度地理编码的线阵摆扫CCD正射影像。     

Lidar-aided analysis of boreal forest backscatter at Ku band

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.     

IKONOS影像生产1∶10 000地理信息产品的研究

简要介绍了IKONOS卫星遥感影像适用于地理信息产品生产的特点,然后通过试验生产,并与传统的航片相比较,详细分析了利用IKONOS影像作为数据源生产1∶10000基础信息产品在精度、生产流程、工作效率、生产周期、外业工作量和价格等方面的情况。     

VIIRS/DNB夜间灯光月度产品插补方法对比——以北京为例

新一代VIIRS/DNB(Visible Infrared Imaging Radiometer Suite Day/Night Band)夜间灯光数据因其具备更精细的时空分辨率、数据不存在饱和现象、不同年份数据可比性强等优点而迅速代替DMSP/OLS(Defense Meteorological Satellite Program's Operational Linescan System)夜间灯光数据成为新的研究热点。但由于杂散光的污染,VIIRS/DNB夏季数据数值缺失严重,致使数据在空间和时间上不连续,因此,插补缺失数据成为后续应用的前提。鉴于此,论文从插补结果异常值、与参照值对比、计算性能三个方面,系统比较了三次样条插值(样条)、三次Hermite插值(Hermite)、灰色预测模型(GM)、三次指数平滑法(指数)4种插补方法的适用性,以期为插补VIIRS/DNB夜间灯光数据提供方法选择的依据。研究结果表明：①异常值比较方面,Hermite法未出现异常值,另外3种算法仅出现少量异常值(0.02%~1.34%);②与参照值的对比方面,Hermite法与参考值接近程度最高,GM接近程度最低,样条法和指数法介于两者中间;③算法性能比较方面,4种方法都具备计算简单、容易编程的特点,但指数法的算法时长是另外3种方法的10倍以上。因此,综合多方表现,当插补月份前后两侧均有足够长的原始数据时,插补效果好、计算速度快、不会出现过冲现象的Hermite法最适宜,样条法次之;当插补月份仅单侧有足够长的数据时,适宜采用指数法(插补效果好、计算速度较慢)或GM(插补效果偏低、计算速度快)进行插补。     

A stochastic method for the prediction of icebreaker bow extreme stresses

It is well established that the ship-ice interaction process is quite complex and associated ice loads on the icebreaker hull is a stochastic process. Obviously, novel accurate statistical methods and models should be developed and applied to estimate extreme bow stresses.This paper studies icebreaker bow stresses based on measured distribution of ice thickness in the Arctic Ocean on the way to and from the North Pole. Since the vessel route was carefully selected searching for easier ice conditions, the Arctic Ocean crossing was not a straight linear but a meandering path. Thus, the specific ship route data was biased with respect to general ice statistics in the region, but true with respect to the route specific ice data encountered by a ship navigating in that region. Therefore the route specific ice thickness data is directly needed for ship design and navigation analysis. It is assumed that captains are competent and knowledgeable, and therefore will select a route that provides the most favourable ice conditions.This paper contributes to study of the newest Chinese self-designed polar icebreaker, serving the purpose of enhancing icebreaker operational reliability. Finite Element Method software package ANSYS/LS-DYNA has been employed to simulate bow stress pattern for a particular icebreaker operating in the Arctic Ocean. Extreme bow stresses were estimated using Naess-Gaidai method. The latter is a first application of Naess-Gaidai method to a distribution with lower bound. Thus this paper aims at introducing an efficient method of estimating route-specific icebreaker extreme bow stresses.     

联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法,针对北斗单系统实时建立电离层延迟格网的不足,提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网,并利用北斗单频单点伪距定位进行精度验证。结果表明,在有效格网点覆盖充足的地区,BDS与GPS实时电离层延迟格网定位效果相当;而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数,也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。     

浙江省台州-昌化深部构造特征探测

采用高分辨折射和宽角反射/折射综合地震探测方法,在浙江省中部沿黄岩、临海、东阳、桐庐、昌化进行深部构造探测,获得一条长约350km的速度结构剖面。探测结果表明,地壳结构具有明显的多层性,存在3个速度间断面;基底速度结构图像揭示了速度结构的横向非均匀性,这种不均匀性既对应于地质构造单元的分界线或断裂构造带,也反映出东西部构造特征的差异性。     

GPS/PWV时间序列特征提取方法的研究

针对GAMIT/GLOBK软件解算得到的4 a GPS/PWV时间序列的特征提取问题,提出基于滤波辅助的部分集成经验模态分解（PEEMD）与Hilbert谱分析相结合的特征提取方法。首先,在PEEMD方法的基础上,结合滤波辅助的PEEMD方法与Hilbert谱分析,建立GPS/PWV时间序列特征提取模型;然后,将所提出的方法应用于TNML测站4 a的GPS/PWV长时间序列和7 d的GPS/PWV短时间序列分析中,并将滤波辅助的PEEMD结果与传统的小波分解结果进行对比。结果表明,该特征提取方法能准确有效地提取出 GPS/PWV时间序列中的周年周期和日周期特征分量,滤波辅助的PEEMD分解结果与小波分解结果一致,且提取的特征分量与原始信号更加吻合。     

基于GAMMA的D-InSAR技术在矿区地面沉降监测中的应用

详细介绍了专业的雷达数据处理软件GAMMA和基于GAMMA的双轨D-InSAR数据处理流程;对济宁地区真实L波段的ALOS PALSAR数据进行了双轨D-InSAR处理,完成了从干涉数据的读取到形变图生成的整个流程,并生成了一系列清晰的结果图;结合GIS软件得到研究区的沉降位置、分布和沉降量等信息。研究表明:利用GAMMA软件可以对雷达影像进行双轨D-InSAR处理,得到清晰的中间结果图;双轨D-InSAR可以对矿区进行地面沉降监测,进而掌握由于煤矿开采引起的地面沉降分布和沉降程度,为煤矿区的合理开采和可持续发展提供一定的理论依据。